Reviews Power Actuated Fastening System

0.27 Caliber Green Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)

  • Washer pins - powder fastener actuated fastening system, Increases bearing surface against the material to be fastened..
  • Shank diameter = .14Shank diameter = .145.
  • Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
Check Stock

Washer Pins - Powder Actuated Fastening Systems 1 1/2“ Inch Washered Pins Construction Fastener Nail (100pcs per Box)

  • Washer pins - powder fastener actuated fastening system, Increases bearing surface against the material to be fastened..
  • Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
Check Stock

BLUEPOINT BP303A- .27 Caliber semi-automatic powder actuated tool, for 10 shot (6.8 x 11mm) strip load

  • This Fully Automatic Powder-Actuated Fastening Tool is perfect for many applications - fastening drywall track, 2x4s, suspended ceiling applications, insulation, and fastening grating to concrete or steel is a snap..
  • The fully automatic cartridge advance and piston return provides for a higher fastening rate, without the need to manually cycle your tool..
  • The magazine accessory accepts collated strips of 10 fasteners, and an optional narrow-access baseplate allows for use of single fasteners with pre-mounted steel washers..
  • This tool meets ANSI standard A 10.3, as well as OSHA requirements for low velocity tools..
Check Stock

ITW BRANDS 40088 .22 Caliber Fastener Tool

  • Powerful, low velocity, single shot actuated tool for fastening to concrete, masonry, or steel.
  • Silencing handle eliminates unnecessary job-site noise.
Check Stock

Itw 40088 .22 Caliber Ramset Single Shot Trigger Operated Powder

  • Powerful, low velocity, single shot actuated tool for fastening to concrete, masonry, or steel.
  • Silencing handle eliminates unnecessary job-site noise.
Check Stock

Remington 476 Powder Actuated Fastening Tool

  • Light weight duty tool designed for applications such as small room additions and basement remodels.
  • The model HD22 is a low velocity piston type fastening tool.
  • Designed for use with Ramset 0.22 caliber CW powder loads and Ramset fasteners.
  • HD22 single shot .22 caliber powder actuated fastener tool.
  • Delivers a powerful single shot to fasten your projects.
Check Stock

.22 Caliber Power Load A Crimp Yellow Level 4

  • Light weight duty tool designed for applications such as small room additions and basement remodels.
  • The model HD22 is a low velocity piston type fastening tool.
  • Designed for use with Ramset 0.22 caliber CW powder loads and Ramset fasteners.
  • HD22 single shot .22 caliber powder actuated fastener tool.
  • Delivers a powerful single shot to fasten your projects.
Check Stock

Smith & Wesson 350103 100 Handcuffs Standard Size, Nickel

  • Smith and Wesson 100 – Chain Handcuff Color: Nickel.
  • Chain Handcuff, Hancuffs have key actuated lock along with double locking system which is actuated b.
  • Wrist opening is 2.04 inch, weight 10.0 oz and distance between thE cuffs is 2.00 inch..
Check Stock

Hilti 3498241 HDM 500 Manual Adhesive Dispenser

  • Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
  • Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
  • .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
  • For driving pins, studs, etc. into concrete and steel.
Check Stock

Hilti 3738Baseplate 36/S13 - DX 36

  • Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
  • Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
  • .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
  • For driving pins, studs, etc. into concrete and steel.
Check Stock

Milwaukee 2821-22 18V Li-Ion Brushless Cordless SAWZALL Reciprocating Saw Kit

  • Wear resistant lever actuated QUIK-LOK blade clamp provides fast and easy blade changes.
  • Metal reinforced battery connection provides improved durability and battery retention over life.
  • REDLINK plus intelligence: the most Advanced system of cordless power tool electronics, provides optimized performance and overload protection using total system communication between tool, battery and charger.
  • Built-in LED light illuminates the work surface while cutting.
  • REDLITHIUM XC5.0 battery pack: provides superior pack construction, more work per charge and more work over the life of the pack than competitive batteries.
Check Stock

Hitachi C10FCG 15-Amp 10 Single Bevel Compound Miter Saw

  • 0-52 degree miter angle range to the right & left for increased flexibility.
  • 0-45 degree bevel range to the left to provide clean and accurate bevel cuts.Thumb actuated positive stops for quick miter adjustments.
  • 24.2 lbs to facilitate maneuverability and easier transport.Dust collector attachment included to minimize airborne particle.
  • 15 Amp motor delivers high power for the toughest cutting jobs.Large table for better material support with vice clamping system to secure work piece.
Check Stock

Maxpower 561380 2-Count Blade Set for 42-Inch Cut toro

  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM.
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability.
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility.
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts.
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece.
  • THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments.
  • WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.
Check Stock