Reviews Powder Actuated Tool

.22 Caliber Power Load A Crimp Yellow Level 4

• Light weight duty tool designed for applications such as small room additions and basement remodels.
• The model HD22 is a low velocity piston type fastening tool.
• Designed for use with Ramset 0.22 caliber CW powder loads and Ramset fasteners.
• HD22 single shot .22 caliber powder actuated fastener tool.
• Delivers a powerful single shot to fasten your projects.

Hilti 3498241 HDM 500 Manual Adhesive Dispenser

• Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
• Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
• .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
• For driving pins, studs, etc. into concrete and steel.

Hilti 3738Baseplate 36/S13 - DX 36

• Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
• Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
• .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
• For driving pins, studs, etc. into concrete and steel.

TapeTech 16TT90 MudHead 90 Degree Inside Corner Finisher

• ✅ HAND-HELD FLAT SURFACE AND CORNER SEAM TAPE APPLICATOR TOOL - Reduces taping time and increases accuracy when applying tape to various surfaces..
• ✅ RELOAD TAPE ROLLS AS NEEDED - *Only compatible with TitanRF Faraday Tape 2" width x 164' length rolls. Tape not included in this Taperator kit! Multiple tape kit options available..
• ✅ EASY TO USE - Preferred tool for applying TitanRF Faraday Tape to surfaces, connecting multiple sheets of TitanRF Faraday Fabric, constructing industrial signal-proof rooms and tents, or other RF shielding projects. A trigger actuated cut-off blade slices tape free from the roll cleanly..
• ✅ RETRACTABLE CREASING WHEEL - Taperator has a retractable creasing wheel for applying pressure evenly to flat surfaces or taping inside hard to reach corners seams..
• ✅ TRIGGER ACTUATED CUT-OFF BLADE - A trigger actuated cut-off blade slices tape free from the roll cleanly at the end of runs..

BLUEPOINT BP303A- .27 Caliber semi-automatic powder actuated tool, for 10 shot (6.8 x 11mm) strip load

• This Fully Automatic Powder-Actuated Fastening Tool is perfect for many applications - fastening drywall track, 2x4s, suspended ceiling applications, insulation, and fastening grating to concrete or steel is a snap..
• The fully automatic cartridge advance and piston return provides for a higher fastening rate, without the need to manually cycle your tool..
• The magazine accessory accepts collated strips of 10 fasteners, and an optional narrow-access baseplate allows for use of single fasteners with pre-mounted steel washers..
• This tool meets ANSI standard A 10.3, as well as OSHA requirements for low velocity tools..

Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case

• Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
• Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
• Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
• 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
• Ergonomic Body: Rugged but also lightweight and comfortable for extended use.

Simpson Strong Tie P22AC2 .22 Caliber Power Load A Crimp Brown Level 2 100 per Box

• Nailed It: This single pin concrete nailer is a safer, pneumatic alternative to powder actuated concrete tools for basement renovations, garage....
• Pro Design: Featuring a magnesium body with one piece drive blade of hardened steel, this nailer is ideal for fastening wood, steel, or other thin....
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make....
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing,....

VOTOER Mini Manual Steel Nail Gun Wall Fastening Rivet Tool, Wire Slotting Device Decoration Tools Shooting Machine for Penetrate Concrete Walls, 7.3mm Diameter

• Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
• Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
• Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
• 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
• Ergonomic Body: Rugged but also lightweight and comfortable for extended use.

Woodpecker ST38H 14 Gauge Concrete Nailer with 400 PCS Concrete T Nails, 3/4" to 1-1/2" T Nail Gun for Concrete Nailing, Baseboard, Pallets

• Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
• Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
• Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
• 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
• Ergonomic Body: Rugged but also lightweight and comfortable for extended use.

SYCOOVEN Bike Disk Brake Kit, Metal Front Rear Caliper, 2pcs 160 mm Rotors & Brake Lever & 12 Bolts for Road Bike, Mountain Bike

• ✔✔Repairing: Cable actuated post mount mechanical disc brake calipers provide excellent stopping power and are easy to service. It can be used in bicycle repairing..
• ✔✔Levers:Works with cable actuated road levers.Upgraded tool-free pad adjuster, changing without disassembling the caliper, no need for traditional plum six angle screwdriver.Automatic lever position restoration provides quick recovery from the crash..
• ✔✔Adjustability: Smooth power modulation and easy adjustability for Universal bike..
• ✔✔Universal:The bike disc brake kit are suitable for universal, mountain bike, road racing bike.This is your ideal replacement parts..
• ✔✔Package: Our package come with 2pcs clip, 2pcs brake handle, 2pcs disk, 12pcs screws, 2pcs brake cable..

JRready M81969 14 10 20 Solid Barrel Installing Removal Tool for servicing electrical connectors in Electrical Wiring Interconnect Systems (25pcs)

• Due to the sealing grommet on the contact wire barrel, it requires a special tool which is inserted through the connector, attached to the mating end of the contact, and then “pulled” into the connector. A release on the tool is actuated and the tool can be removed from the contact..

Hilti DX 462-HM High Speed Powder-Actuated Marking Tool - 376373

Ramset Powder Fastening Systems 2-1/2-Inch Pin w/Ramguard (100 per box)

• Designed for use in treated lumber applications.
• Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
• Shank diameter = .145 Head diameter = .300.