Reviews Powder Actuated Fasteners

.22 Caliber Power Load A Crimp Yellow Level 4

• Light weight duty tool designed for applications such as small room additions and basement remodels.
• The model HD22 is a low velocity piston type fastening tool.
• Designed for use with Ramset 0.22 caliber CW powder loads and Ramset fasteners.
• HD22 single shot .22 caliber powder actuated fastener tool.
• Delivers a powerful single shot to fasten your projects.

Ramset Powder Fastening Systems 2-1/2-Inch Pin w/Ramguard (100 per box)

• Designed for use in treated lumber applications.
• Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
• Shank diameter = .145 Head diameter = .300.

BLUEPOINT BP303A- .27 Caliber semi-automatic powder actuated tool, for 10 shot (6.8 x 11mm) strip load

• This Fully Automatic Powder-Actuated Fastening Tool is perfect for many applications - fastening drywall track, 2x4s, suspended ceiling applications, insulation, and fastening grating to concrete or steel is a snap..
• The fully automatic cartridge advance and piston return provides for a higher fastening rate, without the need to manually cycle your tool..
• The magazine accessory accepts collated strips of 10 fasteners, and an optional narrow-access baseplate allows for use of single fasteners with pre-mounted steel washers..
• This tool meets ANSI standard A 10.3, as well as OSHA requirements for low velocity tools..

0.25 Caliber Green Shot Strip Loads, Low Velocity Power Fasteners Booster Actuated Powder Loads (100-Count) (Level 3)

• Designed for use in treated lumber applications.
• Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
• Shank diameter = .145 Head diameter = .300.

Ramset Powder Fastening Systems 2-1/2-Inch Washer Pin w/Ramguard 100 per Box

• ITW Ramset powder actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to....
• Coated to improve corrosion resistance in treated lumber and other applications.
• Washer increases bearing surface against the material to be fastened.
• Designed for use in treated lumber applications.
• Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.

Hilti 3498241 HDM 500 Manual Adhesive Dispenser

• Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
• Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
• .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
• For driving pins, studs, etc. into concrete and steel.

Hilti 3738Baseplate 36/S13 - DX 36

• Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
• Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
• .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
• For driving pins, studs, etc. into concrete and steel.

0.22 Caliber Green Single Shot Powder Loads, Power Fasteners Power Loads (100-Count)

• Power actuated fasteners are specifically fabricated to meet the exacting requirements of toughness and durability.

Hilti DX 462-HM High Speed Powder-Actuated Marking Tool - 376373

Ramset Powder Fastening Systems SP178 1-7/8-Inch Step Shank Pins 100 Pack

• Use with Ramset powder actuated tools for general purpose attachments to harder concrete and steel when maximum holding strength is required.
• Consistent, optimum quality in every pin.

Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case

• Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
• Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
• Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
• 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
• Ergonomic Body: Rugged but also lightweight and comfortable for extended use.

BokWin 4Pcs Small Butterfly Twist Latch with Keeper, Twist Latch, Padlockable Latches for Case Box

• 【Package Included】: 4 x Padlockable Latches.
• 【Premium Quality】: Butterfly twist latch made of high quality Iron material, it is durable, stable and rust resistant. It can load carry the limit of 2000N/450lbs tension..
• 【Widely Application】: Butterfly Toggle Latch used in the various types of flight case, road case, microphone box, multi-function case, wooden box, aluminum tool case, photographic equipment box, etc..
• 【Easy to Use】: Just put Locked fasteners flat to the case and locks down the wing. Easy operation actuated by fingertip pressure on the wing - 180 degree turn locks and unlocks the unit..
• 【Quality After-sale Service】: Satisfying customers is BokWin's top priority. If you do not 100% satisfied with our products or if you have any questions, you can contact us anytime. BokWin would solve all the problems to your satisfaction. FREE REPLACEMENT or REFUND within 90days..

Ramset Powder Fastening Systems 2-1/2-Inch Pin w/Ramguard (100 per box) (2)

• Washer pins - powder fastener actuated fastening system, Increases bearing surface against the material to be fastened..
• Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.