Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD
- 【SATA III 1 to 5】SATA3.0 1 to 5 expansion card supports 6-port 6.0Gbps SATA III interface. This expansion card requires the motherboard or expansion card support point (SATA Interface Multiplier) to recognize 5 hard drives. Normal motherboard SATA does not support this function. If not, only one hard disk can be recognized..
- 【High Performance】SATA III PHY output swing control and automatic impedance calibration. Plug in the SATA or DC2.5 power cord to charge the expansion card. Plug the SATA input cable into the motherboard or expansion card to charge the SATA..
- 【Meet The Specification】The SATA3.0 expansion card complies with the Serial ATA Port Multiplier specification, the serial ATA port selector specification, the ATA PHY series electrical specification revision 1.0, and the accessory specification ATA series high-speed serialization..
- 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
- 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer servic....
Check StockZRM&E 2pcs 4Pin IDE PSU Power Splitter Cable D Type Large 4P Molex 1 Male to 3 Female Multiplier PC Fan Extension Cable
- Type: 1 to 3 D Type Large 4Pin IDE 1 Male Port to 3 Female Port PSU Power Splitter Extension Cable.
- Interface Port: One side is large 4 Pin IDE male connector, and the other 3 sides are large 4 Pin IDE female connector. 1 to 3 Multiplier PC Fan Extension Cable..
- Function: Use to add extra power outlets to your power supply for connecting IDE PC fan..
- Application: Standard 4 Pin Power Connectors for Hard disk, Cooling fan, CDROM, DVD-ROM etc. suitable for adding more cooling fan, CDROM Drive..
- Package Content: 2 x Molex Extension Cable 4 Pin 1 Male to 3 Female IDE PSU Internal PC Power Splitter.
Check StockSyba 16 Port SATA III to PCIe 3.0 x4 Non-RAID Expansion Card Quad ASM1064, SD-PEX40164
- 6 SATA III ports with transfer speeds up to 6.0Gbps.
- backward compatible with SATA I/II at 1.5/3.0Gbps.
- PCIe x4 Lanes board. Support both UEFI and Legacy Boot ROM. Work with UEFI or Legacy BIOS motherboards..
- Support SATA Command-based Port Multiplier switching and up to 30 SATA drives via six 5-port PM connections..
- No driver installation is required on Windows 10/8/7/Vista, Server 2008 and later, Linux, Mac OS 10.x and later..
Check StockSyba SD-PEX50055 2 Port USB 3.0 and 2 Port SATA III PCIe 2.0 x4 Controller Card Green Grey
- Backwards Compatible to PCI-e 1.0a with Data Transfer Rate up to 2.5Gbps.
- Internal HDD Power Connector for Supplying Extra +5V Power to the USB Ports.
- USB 3.0 Super-speed (5Gbps) Host Port, Backward Compatible with USB 2.0.
- Compatible with SATA-III (6Gbps), SATA-II (3Gbps), SATA-I (1.5Gbps) Hard Drives and SDD's.
Check StockVantec 4-Channel 6-Port SATA 6Gb/s PCIe RAID Host Card with HyperDuo Technology UGT-ST644R
- 4 Channel for 4 storage devices like SSD or HDD. This Card will let You Grow as Your Needs Grow to Add more Devices to your System..
- Configurable Port as Internal SATA or External eSATA Port, SATA III 6Gb/s on Every Channel for all your SSD and HDD..
- 1 Port Multiplier Function For Multi-Bay Enclosures (4 drives), Support both FIS and Command-based Switching..
- RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your Data Safe and Faster Disk Access, Low Profile Bracket Included..
- Support Windows XP, Server 2003/2008, Vista, 7, 8, 8.1, 10.
- For RAID use, must do a new clean install of the OS to boot..
- install only on true PCIe x4 slot or x8 or x16 Slot only, Download Latest drivers from vantecusa website..
- Note: Cannot Boot If you just move your drive to this controller, write to vantecusa technical support for more info..
Check StockSyba PCI Express SATA II 4 x Ports RAID Controller Card SY-PEX40008
- Supports Serial ATA generation 2 transfer rate of 3.0 GB/s.
- Supports Serial ATA II: port Multiplier 1.0 specifications.
- Integrated Serial ATA Link and PHY Logic.
- Driver supported MS Windows 2000/XP/Vista, Linux, Mac OS 10.4x, Red Hat Linux 8.0.9.0, SuSE Linux 8.1, 8.2,United Linux 1.0.
Check StockDTECH Powered 1 in 4 out VGA Video Splitter Distribution Box Signal Copy with Power Adapter 500MHz High Resolution 1080p
- Mirror Image: Compact 4 port VGA splitter splits a single video source and feeds the same video signal to dual monitors or or multi projectors up to 4....
- 4 way SVGA monitor duplicator with ultra high 500MHz Video Bandwidth provides sharp clear images at resolution up to 1080p (1920 x 1080), 720p.
- Active VGA powered splitter box extends transmission distance up to 262 feet (80m) via standard VGA cable.
- Slim design multiplier saves desk space and All-Metal housing for maximum durability and reliability.
- (NOT supports extended desktop ) 1x4 Video distribution amplifier box supports DDC2, making multiple port VGA duplicator ideal for computer laptop and....
Check StockQphone12 SATA PCI-E Adapter 10 Ports PCI Express X4 to SATA 3.0 6Gbps Interface Rate Expansion Card Controller for HDD ASM1166
- [Efficient] - You could add four 6Gbps/s SATA 3.0 devices to your computer with the PCIe SATA card and 4 SATA cables. Backward compatible to 1.5 Gbps/s and 3 Gbps/s.
- [High Performance] - The 4 port SATA controller based on Marvell 88SE9215 chip, more stable and wider compatible. Port Multiplier FIS-based and Command-based switching supported.
- [Support System] - The SATA expansion card supports Windows XP/ 7/ 8/ 10/ Mac/ NAS/ Linux OS, no driver required. Support install Windows OS from Win10 PE.
- [For All PCs] - Our PCIe to SATA III 4 port expansion card comes with a low profile bracket and 4 SATA cables, compatible with most chassis on the market. Fit for PCIe X1/ X4/ X8/ X16 slot.
- [Please Note] - You could make the system to boot from this SATA card but non RAID. BUT If your motherboard has RAID function, you could make a RAID with this SATA card.
Check StockAD834 Four Quadrant Multiplier Radio Frequency Mixer Module Multiplier Signal Processing for Mixers Filters
- 【High Quality】The quadrant multiplier is made of high quality meterial, adopts the differential balun to single‑ended structure, can effectively suppresses harmonics..
- 【Feature】The quadrant multiplier module is compact design, easy to carry and store, works well for differential merging and making the output signal symmetrical..
- 【Advantage】AD834 Quadrant analog multiplier is an important component of modern signal processing systems, 1.6mm / 0.06in Thickness PCB double panel to ensure good passing performance of small and large current..
- 【Application】The radio frequency module multiplier is practical in work, widely used in phase‑locked loops, signal processing power of mixers, filters..
- 【Quality Assurance】The product is manufactured under strict quality control and standard requirements, and has a high safety factor, so it can be used with confidence..
Check StockEWK 11 PCS 1 Inch Heavy Duty Torque Multiplier Labor Saving Wrench Lug Nuts Remover for Semi Truck RVs Wheels
- 【Multi Applications】EWK Torque Multiplier is designed for removing stubborn wheel lug nuts on most trucks, buses, RVs, semi-trucks and other heavy....
- 【Labor Saver】The cheater wrench torque multiplier produces 1:64 ratio to amplify your torque up to 4800 Nm (3540 ft-lb) for loosening the toughest....
- 【Comprehensive Kit】EWK Torque wrench multiplier set Including an 1" drive torque wrench, a rocking bar handle, an extension bar, a 4-point square....
- 【Heavy Duty】 Constructed of premium alloy steel, this heavy duty torque multiplier is built to last under daily high pressure torqueing. Perfect....
- 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast....
Check StockStark Torque Multiplier Labor Saving Lug Nut Wrench W/ 4 Cr-v Socket 5400NM Lugnut Wrench Cheater Wrench w/ Case
- Remove Rusted Lugnut with Ease - Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
- Durable Torque Multiplier - Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
- Perfect Size Set - Torque wrench multiplier set includes (1) 1-inch drive torque multiplier heavy duty lug wrench, (1) rocking bar handle, (3) 6-point....
- Simple to Use - Remove lug nut caps and place correct socket on to the lug nut.
- Connect cheater wrench to socket and anchor the brace rod against....
- Convenient Storage Case - Heavy-duty plastic blow-molded carrying case provides easy transportation, safe storage, and quick organization. Torque....
Check StockYUNKOZAND 1X PCIE SATA Card 2 Ports,with 2 SATA Cables,6 Gbit/s PCIE SATA Expansion Card,PCIE to SATA Controller,PCI-E 3.0 GEN3 JMicron + JMB582 Chip
- 4 Channel for 4 storage devices like SSD or HDD. This Card will let You Grow as Your Needs Grow to Add more Devices to your System..
- Configurable Port as Internal SATA or External eSATA Port, SATA III 6Gb/s on Every Channel for all your SSD and HDD..
- 1 Port Multiplier Function For Multi-Bay Enclosures (4 drives), Support both FIS and Command-based Switching..
- RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your Data Safe and Faster Disk Access, Low Profile Bracket Included..
- Support Windows XP, Server 2003/2008, Vista, 7, 8, 8.1, 10.
- For RAID use, must do a new clean install of the OS to boot..
- install only on true PCIe x4 slot or x8 or x16 Slot only, Download Latest drivers from vantecusa website..
- Note: Cannot Boot If you just move your drive to this controller, write to vantecusa technical support for more info..
Check StockBroadcom HBA 9400-8e - Storage controller - 8 Channel - SATA 6Gb/s/SAS 12Gb/s low profile - 1.2 GBps - RAID JBOD - PCIe 3.1 x 8
- 4 Internal SATA 6Gb/s Ports. SATA ports are bootable.
- Compliant with Serial ATA Specification 3.0. Hot Plug and Hot Swap.
- Compliant with PCI-Express Specification v1.0.
- Supports Native Command Queue (NCQ). Supports Port Multiplier FIS Based Switching or Command Based Switching.
Check Stock