Reviews Polypropylene Nozzles

Industrial Precision Luer Lock Tip Applicator, 20 mL Syringe, Non-Sterile, Dispense Adhesives, Oil, Lubricants, Sealants, Alcohol, Includes 6 Syringes and 6 Nozzles with Caps, by Tech Team

  • 20 mL polypropylene syringes with secure Luer Lock applicator nozzles and caps for drop by drop application of oils, lubricants, adhesives, inks, paint, perfume, flux, and essential oils. Each syringe has a clearly marked ml scale for accurate measurement of fluids which makes it ideal for measuring additives for 2 cycle engine fuel mixes..
  • Each applicator nozzle comes sealed with a break-away cap on the end. Simply break the cap off, reverse it and use it to seal the end of the applicator tube. The applicator tube connects to the syringe body with a secure Luer Lock twist-on connection..
  • The syringes feature a polypropylene body and plunger with a vinyl seal. Using volatile solvents and corrosive chemicals such as, but not limited to, lacquer thinner and acetone should be avoided, and a 24-hour compatibility test is advised for any fluids that fit this category. Appropriate safety gear such as gloves and eye protection should be used at all times..
  • These syringes are NON-STERILE and are intended for industrial and hobby use. The ability of the syringe to work easily is directly dependent on the viscosity of the fluid. Thin fluids work well, thick ones can become problematic..
  • The set includes six (6) syringes and six (6) nozzles with break-away caps..
Check Stock

Attwood Fuel Vent Line Surge Protector, Black

  • Helps prevent fuel spills when filling up.
  • Helps an automatic shot-off fuel nozzle stop pumping.
  • With non-automatic shut-off nozzles, it produces an audible gurgling sound as an alert.
  • Comes with 2 hose clamps and connects to 5/8-inch hose.
Check Stock

Youngever 6 Pack Empty Plastic Spray Bottles, 6 Assorted Colors (16 Ounce)

  • SPRAY BOTTLES - Total 6 pack 16 oz spray bottles..
  • LEAK PROOF - Leak proof sprayers feature a long lasting polypropylene spray head, tight and secure cap closure for no clog and no leak experience. 3 mode sprayer. Adjust by twisting nozzles, you can get Off, Stream and Mist Mode..
  • COMFORTABLE GRIP- The ergonomic neck gives you a comfortable grip..
  • MULTI PURPOSE - Great spritzer bottle for homemade cleaning solutions, hair care products, garden and plant care, pet training and more.
Check Stock

Shop-Vac 9069800 1.25-Inch Turbo Nozzle

  • This Shop-Vac Multi-Purpose Floor Nozzle provides excellent edge-to-edge cleaning when vacuuming close to baseboards and walls.
  • The powerful rotary brushes of these Shop-Vac Turbo Nozzles use the vacuum's force of suctioning air to operate, all activated by the vacuum-driven....
  • Use with 1-1/4 in. diameter wet dry vacuum hoses and wand extensions.
  • Constructed of durable polypropylene and plastic materials, and includes ball bearings in rotary brush configuration for long-lasting operation.
  • Ideal for use with a variety of dry clean up tasks and is tough-enough for use with both residential and commercial applications.
Check Stock

Youngever 6 Pack Empty Plastic Spray Bottles, Spray Bottles for Hair and Cleaning Solutions in 6 Colors (12OZ)

  • SPRAY BOTTLES - Total 6 pack 12oz spray bottles in 6 colors..
  • LEAK PROOF - Leak proof sprayers feature a long-lasting polypropylene spray head, tight and secure cap closure for no clog and no leak experience. 3 mode sprayer. Adjust by twisting nozzles, you can get Off, Stream and Mist Mode..
  • COMFORTABLE GRIP- The ergonomic neck gives you a comfortable grip..
  • MULTI PURPOSE - Great spritzer bottle for homemade cleaning solutions, hair care products, garden and plant care, pet training and more.
Check Stock

Saniwise Toilet Seat, Elongated Advanced Bidet Toilet Seat with Self Cleaning Dual Nozzles Separated Rear & Feminine Cleaning Natural Water Spray, Soft Closed Toilet Seat, Easy DIY Installation

  • STURDY, HYGIENIC, HEALTHY – Upgrade your bathroom experience and enhance your bum’s cleanliness with the premium Saniwise toilet seats. Adopted reinforced polypropylene plastic for durability. Includes 12-month warranty on the bidet seat and parts..
  • DUAL SELF-CLEANING NOZZLES - Saniwise bidet toilet seat contains two self-cleaning nozzles for front and rear washes. The posterior spray offers a stronger and more complete ambient water stream while the feminine spray is softer and gentler..
  • EASY TO INSTALL – Comes with a metal T connector and braided metal hose to reduce cross-threading and prevent leaks. No electrical power or plumbing is needed. Fits most standard elongated toilets. All mounting accessories are included for fast installation. One button press lift-off feature for easy seat removal and toilet cleaning..
  • ADJUSTABLE SPRAY PRESSURE - The water pressure can be adjusted from gentle to strong using the simple turn lever controls. The lid and seat close slowly and quietly to prevent the loud bang of a toilet seat slamming closed during the night..
Check Stock

POWERTEC 70207 4 Inch Flexible Dust Collection Hose and Fittings Kit

  • INCLUDES: (1) Flexible Dust Collection Hose 4” x 12” | (2) Screw End Fittings, (1) Oval Tapered Nozzle and (1) Rectangular Nozzle.
  • FUNCTION: A complete dust collector hose kit that possesses a versatile assortment of fittings intended to promote project flexibility and optimal airflow to your dust collection system.
  • HARD TO REACH: A flexible hose is designed with a 4” diameter for component compatibility, and a 12” length that can expand up to an impressive 36 inches for out-of-reach applications.
  • FITTINGS: Rectangular and oval tapered nozzles provide optimum adaptability with table saws, sanders, drill presses, routers, and other woodworking equipment.
  • QUALITY: The hose is made out of polypropylene (PP), with both pliable to rigid profiles – while the fittings are all constructed out of ABS plastic for heavy duty use and long-term durability.
Check Stock

16 Pieces Brass Misting Nozzles Kit Atomizing Nozzle Kit 0.4 mm Orifice 2 Points 1/4 Inch Lock Misting Nozzles with 4 Pieces Plug for Patio Misting System Outdoor Cooling System Garden Water

  • ...g, can be applied without any leak-proof tape or sealant, the nozzle can produce very fine fog to cool the air and lower the temperature in the hot summer.
  • Reliable brass: the outdoor misting nozzle tees is made of brass material, which has high efficiency, anti-rust and anti-fog performance.
  • Other parts are made of polypropylene material, with good sealing, no leakage, stable and firm, long service life.
  • Maintenance and cleaning: hard water, lime and calcium may cause clogging of the atomizing nozzle.
  • Dip it in vinegar and warm water to clean the nozzle regularly.
  • When the misting nozzle is blocked by impurities, it can be completely disassembled, which makes it easy to clean.
  • Wide applications: 1/4 inch lock misting nozzles kits are very suitable for agriculture, terraces, greenhouses, swimming pools, lawns, gardens, cooling systems, irrigation (flowers, grass, vegetable watering), balcony cooling, etc., applicable for a variety of scenes, convenient and practical, essential for home.
Check Stock

1\ Polypropylene PP Manual Fuel Transfer Nozzles, Hose & Belting Trigger Dispenser Pump Gun for Caravans, Boats, Motorhomes, Industrial and Agriculture Diesel Oil/Water Dispensing Pump

  • 1" Fuel Nozzles Ideal for equipping fuel pumps and stationary fuel-transfer installations.transferring and distributing Oil and Diesel Fuel include Bio-diesel and Waste Vegetable Oil etc.
  • Ideal for Caravans, Boats, Motorhomes, Industrial and Agriculture. These pump can used as the primary system on earth-moving machinery and on mobile fuel pumps on vehicles or in construction yards.
  • Hose Swivel at Inlet for increased maneuverability & convenience in use. Manual control..
  • the material is Polypropylene PP，Temperature range - -10 C to +65 C.
  • The trigger nozzle is also suitable for oils and fuels and has a working pressure of 5 bar (73 psi). The maximum flow of the trigger nozzle is 120 Litres per minute..
Check Stock

Cool-Off Micro-Mist Nozzle- Garden & Patio Misting System Cooling Brass Nozzles with 0.012 Inch Size & 10/24 Inch Thread Pack of 5

  • MISTING NOZZLES: Want to increase the time you spend in your lawn or patio this summer? Then the Cool-Off Micro-Mist nozzles can upgrade your simple....
  • HIGH QUALITY: You can have resort-class cooling and comfort in your backyard with these simple misting nozzles that can be attached to your misting....
  • PERFECT COOLING: The patio cooling nozzles will let you have a wonderful cooling system. This can be used for dust removal or special effects like....
  • MISTING KIT: This kit contains 5 brass nozzles with nozzle orifice measuring 0.012 inches. Each nozzle has 10/24” thread, that can be hand tightened....
  • EASY TO INSTALL: The misting system nozzles can be easily installed. The outdoor misting nozzles will give you a wonderful cooling system..
Check Stock

Eastwood 4 Pieces 1/4 in. Medium Replacement Steel Siphon Silver Nozzles Set for Siphon Power Sandblasting Guns

  • He Steel Nozzles Don'T Last As Long As The Ceramic Nozzles But They Are Less Likely To Break If The Gun Is Dropped.
  • This Nozzle Set Includes Nozzles , One Air Jet And An Air Jet Washer.
  • These Nozzles Fit Our Blast Cabinets And Our Blast-Out-Of-A-Bucket Gun.
Check Stock

HYDRO MASTER 0179101 Universal Outdoor Misting System Calcium Inhibitor Filter (2 pcs)

  • [ Solid Brass Misting Nozzles and Plug ] The misting nozzles and the plug are mechanically carved from the brass rod. Each nozzle or plug contains a black gasket, good sealing..
  • [ 0.0197" Orifice (0.5 mm) Excellent Misting Effect ] The orifice of the misting nozzles and plugs is 0.5mm（0.0197"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer. Diameter: 0.9cm(0.35"), Height: 1cm(0.39").
  • [ 10/24 UNC Standard Thread ] The thread of the nozzles and plugs is 10/24 UNC, and matches many kinds of tee connectors widely. Such as the 1/4" tee connector, 1/2" turn 1/4" tee connectors, standing misting nozzle connector and so on..
  • [ Product Included and Water Setting ] Product included: 10pcs mist nozzles and 2pcs mist plugs. Water Setting: 2-2.3GPH(us gal per hour), 0.2-0.6MPA. It's suggested to install less than 30pcs nozzles on one water line to make an excellent misting effect in common faucet/tap water pressure in the U.S..
  • [ Wide Range of Use in Hot Summer ] The nozzles are used in misting system to make cooling misting, the plugs are used to stop somewhere you don't want to mist some time. It's widely used to make outdoor cooling system, agriculture irrigation system, standing misting system, trampoline misting, de....
Check Stock

Genuine E3D v6 Plated Copper Heater Block (V6-BLOCK-CARTRIDGE-COPPER)

  • Cleaning needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears..
  • V5 V6 Nozzles: Material: brass, Thread type: M6, Output diameter: 0.4 mm.
  • Input filament diameter: 1.75 mm, Compatible: V5 and V6 extruder hotend Filament, supported: ABS / PLA / PETG / Carbon Fiber.
  • Spanners: Nozzle spanner make nozzle installation and removal easier. Suitable for nozzles with a diameter of 6mm, such as MK8 nozzles, E3D V5 V6 nozzles, etc. Heating block spanner only fit for V6 heat block. Allen wrench makes mounting and dismounting small screws easier..
  • Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material.
  • it is anti-static, non-magnetic precision tweezers..
  • Silicone socks: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print..
Check Stock