Reviews Polycrystalline Diamond Composites

Norske Tools NCSBP281 6-1/2 inch 4 Tooth Polycrystalline Diamond (PCD) Hardie Fiber Cement Saw Blade

  • Specially designed for cutting HardiePlank, Cemplank and other fiber cement products.
  • Features abrasion-resistant polycrystalline diamond carbide for faster cutting and increased cutting life.
  • Extra-large gullet design improves material removal and minimizes dust.
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation.
Check Stock

TOMAX PCDM61204 6-1/2 Inch 4 Tooth Polycrystalline Diamond Tipped (PCD) Hardie Fiber Cement Saw Blade with 5/8-Inch DMK Arbor

  • Specially designed for cutting HardiePlank, Cemplank and other fiber cement products.
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
  • Features abrasion-resistant polycrystalline diamond tipped for faster cutting and increased cutting life.
  • Extra-large gullet design improves material removal and minimizes dust.
Check Stock

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
  • Cuts up to 9,000' or 5 stacks of fiber cement.
Check Stock

Diablo by Freud D0704DH 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor, Multicolor

  • The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade.
  • The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades.
  • The laser cut thin kerf design gives fast and precise cuts with less dust and waste..
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.
Check Stock

DEWALT Circular Saw Blade, 7 1/4 Inch, 4 Tooth, Cement Cutting (DWA3193PCD)

  • synthetic polycrystalline diamond tipped teeth.
  • Designed for cutting fiber cement and laminate/prefinished flooring.
Check Stock

LSHUZIYU 7-1/4\(185mm)-4PCD, Arbor 5/8\

  • Diameter 7-1/4" (185mm), 4PCD, Arbor 5/8" with diamond washer. Max Speed RPM 10000.
  • For Fiber Cement and Laminate Flooring, Very Sharp And Clear Cut.
  • 4 Polycrystalline Diamond Tipped For Longer Cutting Life, Compared Carbide-Fiber Cement Blades 60X Times Longer.
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation.
Check Stock

Bosch CB704FC 7-1/4 In. 4 Tooth Edge Diamond-Impregnated Carbide-Tipped Saw Blade

  • The professional choice for cutting fiber cement material.
  • Polycrystalline diamond tips for maximum life and dependability.
  • Thin kerf, fully hardened body for fast, accurate results.
  • Patented C-3 Dyanite carbide teeth are diamond ground to be precision sharp from the start and stay sharp up to 6X longer than standard carbide.
  • Impact resistant tri-metal shims between each carbide tip and the blade act as shock absorbers in tough applications.
  • A fully hardened thin kerf plate means less material is removed which allows for a faster cut while still remaining straight and true.
Check Stock

IRWIN 10-Inch Circular Saw Blade, Fiber Cement PCD, 6-Tooth (4935624)

  • Polycrystalline diamond-tipped teeth will last up to 15X longer than standard carbide fiber cement blades..
  • Thin kerf blade produces less dust than continuous rim blades..
  • Ground and hardened plate body provides smooth and accurate cuts..
Check Stock

Ghostrunner - PlayStation 5

  • Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM.
  • Perfect for slicing through fiber cement board and laminate flooring.
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts.
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear.
  • Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws.
Check Stock

KGS PRO-PAD Diamond Hand Polishing pads (3 Pack, Combination set (grit 60, 200, 400))

  • KGS DIAMOND - MIXED PACK OF THREE GRITS (3 pcs).
  • EXTRA COARSE GREEN 60 GRIT - MEDIUM RED 200 GRIT - YELLOW 400 GRIT.
  • BEST VALUE EVER - TRIPLE STARTER PACK TO INTRODUCE DIAMOND SANDING.
  • Works on glass, tiles, ceramics, bricks, stone, wood, paint, fibre-glass and composites.
  • Fast, aggressive, long-lasting, consistent & cost-effective - Especially in the Multi Packs!.
Check Stock

Diablo D1006DH Cement Saw Blade multi 10

  • The only approved james hardier Polycrystalline diamond ( PCD ) tipped fiber cement saw blade. Developed by James hardy and Freud Diablo for all james....
  • The PCD triple chip design offers up to 60 times longer cutting life than standard Carbide blades.
  • The laser cut thin kerf design gives fast and precise cuts with less dust and waste.
  • Item Package Dimension: 14.0" L x 10.0" W x 10.0" H.
Check Stock

Z-Lion Diamond Abrasive Paper Sheets Diamond Sandpaper for Sanding Stone Glass Ceramic(4pcs/set)

  • Diamond Polishing Sheet is designed for hand polishing of stone glass and ceramic,especially useful when polish hard to reach areas.
  • Size: 3.54" x 2.16"(L*W),there are varieties of designs to choose.
  • Diamond polishing sheet is more aggressive and sharp,offers durable and long lasting use.
  • It never leaves dye on the surface of stone during working and has good polishing effciency.
  • Electroplated hand polishing sheet with flexible cloth back for granite, marble, glass, composites, concrete, softstone, terrazzo, gemstone, ceramics, porcelain.
Check Stock

Diamond Drill Bit Set 2mm 20 Pieces Compatible with Dremel Collet Included Twist Tip Jewelry Beach Sea Glass Shells Gemstones Lapidary Ornament Bracelet Necklace Arts Crafts

  • PREMIUM QUALITY 20 pcs Set of 2 mm Drilax Diamond Drill Bits..
  • PRECISION TOOLS for drilling holes in sea shell, sea glass, beads, tough stones, gemstones, pebbles, precious and semi-precious stones, porcelain, optical material, composites and even rocks..
  • TOOLS for Jewelry Designers for drilling clean holes for making Earrings, Pendants and Bracelets. They have multiple layers of industrial diamond particles bonded to body which provides longer drill life..
  • COOLING WATER NEEDED - High Quality Diamond Coated Drill Bits 20 pieces - Wet Type (water to be used during drilling).
Check Stock