Reviews Poe To Usb

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

KVM Extender HDMI USB Over IP 4K@30Hz 4:4:4 Video, Webcam Extender, Supports Gigabit POE Network Switch,Support HDMI Audio 2CH/5.1CH/7.1CH/DTS/and USB 2.0 with Independent EDID Manageme

  • ...4, Ultra HD is completely lossless, low latency, support full-format HDMI audio, fully meet the audio-visual needs of high-end customers. Recommend to use gigabit switch..
  • 【One-to-Many KVM Extender】KVM and USB extension Supports point-to-point/1TX to 253RX over gigabit PoE switch , and can also support multi-slave control of a host's networking. This product can extend the KVM and USB signal transmission distance to 20 kilometers through the cascaded network extension of multi-level switches..
  • 【Power over Ethernet (PoE)】Support PoE power supply (802.3AF) for easy construction and improve system robustness，recommend Gigabit PoE Switch power for the product,and also have video & audio broadcast..
  • 【KVM Pass-Through USB2.0 Extended】Support full-featured USB2.0 extension, so the receiver can not only connect to the wireless mouse and keyboard, but also connect USB devices such as USB flash drive, USB camera, USB headset, etc..
  • 【Package Of HDMI Over IP KVM Extenderd】1x HDMI Extender Rj45 TX Sender, 1x HDMI Extender Rj45 RX Receiver, 2x Power Adapters and 1x Use....
Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
  • FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....
Check Stock

Wasserstein PoE Power Adapter Compatible with Wyze Cam V3/Outdoor - Continuously Power Your Security Cam with USB Ethernet Adapter

  • POWER SOLUTION - The Wasserstein PoE Adapter continuously powers security camera for users who already have ethernet cables running throughout in their homes.
  • IDEAL FOR OUTDOOR CAMERA – Our PoE Adapter eliminates cable mess. With a single 3ft long micro USB cable bridged to security camera, you can feel free to deploy non-PoE devices with no nearby AC outlets.
  • WEATHERPROOF CABLE - Made of high-grade materials, the cable and pogo pin are weatherproof whilst the ethernet port (RJ45) is not.
  • EASY SET-UP - Simply connect the micro USB cable to the V3/Outdoor camera. The LED indicator will turn yellow while powering your security camera constently.
  • BOX INCLUDES - 1 x PoE adapter, 1 x silicone cover and 1 x user manual.
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

Mikrotik RouterBoard mAP RBmAP2nD micro Access Point wireless Dual-Chain

  • The mAP also known as RBmAP2nD is a micro wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities.
  • It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack.
  • The mAP also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
  • 650MHz CPU, 64MB RAM, 2xEthernet, PoE out, Antenna 1.2dBi built in, Dimensions 68x68x19mm, Ethernet 2x 10/100 Mbit/s Ethernet with Auto-MDI/X.
  • Included parts: 24V 0.8A power adapter, microUSB type B to USB type A adapter.
Check Stock

4K HDMI KVM USB Extender Over Single Cat5e/6 up to 100M(328ft), KVM Extender Support 1080P@60Hz, Plug & Play, Keyboard & Mouse Ethernet Network, Lossless-Near Zero Latency, 4 Ports USB2.0

  • ※【4K@30HZ EXTENDER】: The 4k kvm usb extender extends 4K up to 328 feet (100 meters) over Cat5e/6 UTP cable. This kvm extender supports latest YUV4:4:4 color space and 4K 30HZ refresh rate..
  • ※【Support Full USB2.0 Extending】This hdmi usb extender receiver with usb2.0 port*4, widely used in Bluetooth, USB Headsets, Cameras, MIC, Keyboards, etc. The 4k usb extedner also supports external 3.5mm audio transmission..
  • ※【Power over Ethernet (PoE)】This 4k hdmi kvm usb extedner support PoE power supply (802.3AF) for easy construction and improve system robustness，recommend Gigabit PoE Switch power for the product,and also have video & audio broadcast..
  • ※【Ultra HD lossless low latency kvm extender】The 4k hdmi kvm extender offers low latency 003c50ms without delays and compression artefacts that degrades the high-resolution viewing experience Great ideal for applications such as broadcast, high-end medical imaging, interactive digital signage, home theatres, and even industrial automation..
  • ※【Multifunction】The 4k hdmi kvm usb extender support HDMI Audio Raw Data 2CH/5.1CH/7.1CH/DTS/Dolby format, Support resolution 4k@30Hz/ 1080p@60Hz/ 1080p@50Hz/ 1080p@30Hz/ 720p@50Hz/ 720p@60Hz/ 480p@60Hz...
Check Stock

MikroTik hAP ac3 LTE6 kit RBD53GR-5HacD2HnD&R11e-LTE6 Wireless Dual-Band Router with LTE Support and 5 Gigabit Ethernet Ports

  • hEX PoE lite is a small five port ethernet router in a plastic case, it has a USB 2.0 port and PoE output.
  • Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit.
  • Less power adapters and cables to worry about! Max current is 1A per port, Ethernet ports are shielded.
  • It is affordable, small and easy to use. With it’s compact design and clean looks, it will fit perfectly into any SOHO environment..
  • Current, PCB temperature and Voltage Monitor.
Check Stock

UCEC 1x Type A USB2.0 Female to Ethernet RJ45 Male Plug Adapter Connector

  • ...uter, the rj45 male to usb2.0 female adapter can be used when the USB cable cable for edge An ADSL modem or USB interface with a USB port..
  • ✔ [NOTICE] USB to RJ45 adapter can be used to connect a USB ADSL modem to a router with an RJ45 socket, but please note: you need a PoE data switch.and Note: This adapter can not be USB2.0 plug in one other USB interface device, the other end connected to the computer's RJ45 interface, it will not work,Does not work for USB 1.1 (Printer style USB).
  • ✔ [FUNCTION] RJ45 Male to USB AF Adapter for network easily connects and transfers data between networks with this USB female to RJ45 male Ethernet adapter(you need a PoE data switch).
  • ✔ [COMPATIBILITY] 1. the operating system of the machine, such as a USB interface with a wireless ADSL dialer and router, monitoring dedicated USB interface, a network transmission function of the camera (not connected to the computer network video chat that kind of camera ).2. Don't have the equipment to bring their own operating system, such as: other need to insert the USB port on the computer tips to find equipment..
Check Stock

Mikrotik BaseBox 2 Power Over Ethernet (PoE) Grey WLAN Access Point

  • The BaseBox2 also known as RB912UAG-2HPnD-OUT is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture.
  • Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem.
  • The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door.
  • Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.
  • PoE in: Passive PoE, Wireless 2.4 GHz number of chains: 2, Wireless 2.4 GHz standards: 802.11b/g/n, 10/100/1000 Ethernet ports: 1, Number of SIM slots: 1 Modem (Mini SIM), MiniPCI-e slots: 1, Number of USB ports: 1.
Check Stock

Mikrotik PowerBox 64MB Router 5x10/100 4xPoE-OUT OSL4 Outdoor Case 2W at 24V

  • MikroTik Routerboard hEX PoE RB960PGS 5 Port Gigabit Ethernet Router 128MB.
  • hEX PoE is a five port gigabit ethernet router for locations where wireless connectivity is not required..
  • The device has a USB 2.0 port and a SFP port for adding optical fiber connectivity. The ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit..
  • It is affordable, small and easy to use, but at the same time comes with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports. Less power adapters and cables to worry about! Max current is 1A per port, Etherne.
Check Stock

Haokiang (2-Pack) USB - RJ45, USB2.0 A Female to RJ45 Ethernet Male AF-8P8C Connector, USB Transfer Network Plug Adapter

  • ...SB port of the dialer or router, the rj45 male to usb2.0 female adapter can be used when the USB cable cable for edge An ADSL modem or USB interface with a USB port..
  • ☛It can be used to connect a USB ADSL modem to a router with an RJ45 socket, but please note: you need a PoE data switch.and Note: This adapter can not be USB2.0 plug in one other USB interface device, the other end connected to the computer's RJ45 interface, it will not work,Does not work for USB 1.1 (Printer style USB).
  • ☛RJ45 Male to USB AF Adapter for network,Easily connect and transfer data between networks with this USB female to RJ45 male Ethernet adapter(you need a PoE data switch).
  • ☛Equipment used: 1. Have the operating system of the machine: such as a USB interface with a wireless ADSL dialer and router, monitoring dedicated USB interface, a network transmission function of the camera (not connected to the computer network video chat that kind of camera ).2. Don't have the equipment to bring their own operating system, such as: other need to insert the USB port on the computer tips to find equipment..
Check Stock

Raspberry Pi 3 Model B+ Board (3B+)

  • 1.4GHz 64-bit quad-core processor, dual-band 2.4GHz and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT)..
  • Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports and Extended 40-pin GPIO header..
  • 1 × full size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output and composite video port..
  • 1GB LPDDR2 SDRAM；Micro SD format for loading operating system and data storage. (Micro SD is Not included.).
Check Stock