Reviews Poe Splitter Injector

PoE Ethernet Power Supply 4 Port POE DC 12V-48V Power Adapter Injector for IP Camera 802.3af/802.3at Device

  • Made of plastic material, sturdy and durable to use. Conform to international safety product standards and is safe to use..
  • This PoE injector is compatible with IEEE802.3af/at network devices. Apply for IEEE802.3af/at standard POE powered devices.
  • This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable.
  • This device does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan..
  • Please select according your device power consumption, in order to ensure stable running, the total power consumption must be lower than the total power supply.Tip: the power voltage should not be over DC48V..
Check Stock

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

XW3 iCamera 2 1000 Camera Pairing ADT Cox TWC xfinity Charter Y Cable Cord

  • PoE injector and splitter kit with 5.5mm x 2.1 mm DC jack / plug.
  • Transforms Non PoE devices to PoE enabled.
  • Use with IP security camera, wireless access point and other devices.
Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • 【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
  • 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....
Check Stock

8 Port PoE Injector All in One DC12V-48V 8 Interfaces Passive Adapter Power Over Ethernet Module Injector

  • [HIGH QUALITY ]---It does not have auto detection function and directly supply power to the network devices by force as soon as you connect them，all products are rigorously certified.
  • [ DURABLE QUALITY]---Apply for IEEE802.3af/at standard POE powered devices other brands IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices. durable quality.
  • [MATERIALS]---With high quality materials,This Non standard passive injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable..
  • [SAFE]---Conform to international safety product standards and safe,Suitable for widely used.
  • [STABLE]---Made of plastic material, sturdy and durable to use.the performance is stable and reliable.
Check Stock

ANVISION 2-Pack Active 12V PoE Splitter Adapter Plug 5.5mm x 2.5mm IEEE 802.3af Compliant 10/100Mbps for IP Camera AP Voip Phone and More

  • Input Voltage: DC 44-56V from poe switch or poe injector.
  • Output Power: DC 12V 15.4W Max., Data Rate: 10/100Mbps.
  • Full IEEE 802.3af compliant, DC Jack: 5.5mm x 2.5mm, output cable length: 200mm.
  • Works with IP camera, Voip phone, AP and other 12V Non-PoE devices.
  • 2-Years warranty and unlimited technical support, Package content: 2x PoE splitter.
Check Stock

TRENDnet 65W 4-Port Gigabit PoE+ Injector, TPE-147GI, 4 x Gigabit Ports(Data in), 4 x gigabit PoE Ports(Data + PoE Out), Multi-Port PoE+ Injector up to 100m(328 ft.), Add PoE+ Power to Non-PoE Switch

  • GIGABIT PORTS 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out).
  • EASY INSTALLATION No configuration needed simply connect a PoE network devices to this 4-port PoE+ injector.
  • 4-PORT POE TRENDnet’s 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802 3af) or PoE+ (IEEE 802 3at) devices at industry PoE standards for greater device interoperability.
  • POE DISTANCE The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft ) away from the 4-port PoE injector.
  • FANLESS DISTANCE The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption.
Check Stock

TRENDnet Powerline 500 AV Nano Adapter Kit, Includes 2 x TPL-406E Adapters, Cross Compatible With Powerline 600-500-200, Windows 10, 8.1, 8, 7, Vista, XP, Plug & Play Install, White, TPL-406E2K

  • GIGABIT PORTS: 1 x Gigabit Ethernet port and 1 x PoE+ Gigabit Ethernet port. Integrated power supply..
  • PoE POWER SUPPLY: This gigabit PoE+ injector supplies a PoE device with PoE (15.4W) or PoE+ (30W) power..
  • INSTALLATION FLEXIBILITY: This PoE+ injector has a wall-mountable design that accommodates most installations scenarios..
  • GIGABIT SPEEDS: Full Duplex 2Gbps Ethernet speeds with this PoE+ injector..
  • PoE DISTANCE: This Gigabit PoE Injector provides a PoE+ network connection up to 100 meters (328 ft.).
  • AUTO SENSING TECHNOLOGY: Auto-sensing technology delivers up to 30W to an 802.3at PoE+ device with backwards compatibility for 802.3af PoE (15.4W) devices..
Check Stock

PoE Texas 24 Multi Port PoE+ Injector with 48v 240w Power Supplies - 10/100/1000 Gigabit Passive Power Over Ethernet Means Versatility - 30W PoE Injector for WiFi Access Point PTZ Camera IP Phone

  • Save big on network upgrades and installations using this 24 port gigabit midspan PoE injector. Use it to power up to 24 IP cameras, desktop phones, WiFi Access Points, or other low voltage devices through a network data cable..
  • Instantly upgrade your network gigabit switch to PoE/PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • With this passive PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch. Passive PoE power is ‘Always On’ with power delivery on Mode B pins (-4,5 +7,8)..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

PLUSPOE 2-Pack Wall PoE Injector 48V 24W Power Over Ethernet Adapter 802.3af for Security IP Camera, IP Voip Phones, AP and More,10/100Mbps

  • Simplify installations with a multi-port midspan injector PoE adapter. Our 8 port PoE injector features 8 Data In (LAN) ports with 8 Data + Power Out (PoE) ports. Includes a compatible PoE injector 48V 60W power supply..
  • Supply continuous Power over Ethernet for up to 8 passive 802.3af or 802.3at devices like VoIP phones, WiFi access points, IP cameras, and other low voltage devices. Always check manufacturer specifications for compatibility verification..
  • PoE injector compatible with IEEE 802.3af or at devices. Mode B Negotiation delivers power on pins 4,5(+) / 7,8(-). Passive “Always On” power means all devices receive the same voltage (48v)..
  • Plug and play. This midspan PoE injector is compatible with your 10/100 Mbps network switch or router, delivering Fast Ethernet standards with no loss of signal quality via 8 Data In ports and 8 Data + Power out ports..
  • All of our PoE products are backed by a 1-Year replacement warranty and a 30-Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

PoE Texas 24 Multi Port IEEE 802.3at PoE+ Injector - Gigabit Data Active Power Over Ethernet for High Powered Devices 30W PoE Injector for WiFi Access Point & More with 2X 56V 120W Power Supplies

  • Power IP cameras, desktop phones, WiFi Access Points (WAPs) and more. This 802.3af/at compliant multi port PoE injector takes power from a DC source and adds it to a Cat5, Cat5e, or Cat6 ethernet cable to power your PoE Devices..
  • Instantly upgrade your network gigabit switch to IEEE 802.3at PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • Active PoE means the right power at the right time. An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port. Kit includes two 120 watt power supplies for a total budget of 240 watts..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

AuviPal 802.3af/at Compliant PoE Splitter (2 Pack), PoE to Micro USB 5V Power and 100Mbps Ethernet Adapter for Raspberry Pi, Fire TV Ethernet Adapter, Chromecast, Wyze Cam v2, Arlo 2 Pro, NanoPi

  • Deliver DC 5V 2.4A Power and up to ultra-fast 100M Ethernet data for raspberry pi simultaneously, No need for a nearby AC outlet anymore..
  • Original from AuviPal with 10/100Mbps wired fast speeds which gives you a full speed of your internet, Ideal for providing both power and Ethernet for Raspberry Pi 1B, 1B+, 2B, 3B, Not for latest model 3B+, Please search "B07PNQC25X" on amazon for 3B+..
  • It utilizes the optimal PoE module solution with Isolation transformer + Standard PD (Powered Devices) chip. Run your Raspberry Pi more stable and safer when compared with others cheap non-isolated transformer and diode PD module..
  • PoE HAT Alternative - a cost savings way to achieve POE function for your Raspberry Pi instead of buying an overpriced PoE HAT, What’s more, no need to dismount raspberry pi case or add-on screen anymore by using AuviPal PoE Splitter..
  • Fully complies with IEEE 802.3af/at standard, Work with all IEEE 802.3af/at compliant PoE switch and PoE Injector (Not included). Plug and play, no extra effort or configuration required, Set it up in seconds..
Check Stock

Sophos APX 120 Indoor Access Point and 2YR Central Wireless Standard

  • Sophos APX 320X Outdoor Access Point - 2x2 MIMO, dual radio, dual 5 GHz capable, 4 x external omni-directional antenna included, further sector and directional antenna options available for separate purchase. Includes mounting bracket and clamps for wall and/or pole mount. 5-Year warranty, no extended warranty available..
  • Power adapter/PoE Injector not included, PoE Injector available for separate purchase. 11.5W max. power consumption (802.3af PoE Injector required)..
  • NOTE: Management in Sophos Central only upon launch..
Check Stock