Reviews Poe Injector 48v Ubiquiti

The Last Days Of Patton

  • Ubiquiti Networks 6 Pack UAP-AC-PRO UniFi Access Point - Mounting Bracket - Ceiling Backing Plate - 4x Flat Head Screws (M3x50) - 4x Keps Nut (M3) - 4x Screw (M2.9x20) - 4x Screw Anchor (M3x20) - 48V 0.5A Gigabit PoE with Mount Bracket - Power Cord - Quick Start Guide - Ubiquiti Networks 1 Year Limited Warranty.
  • Networking Interface: 2x 10/100/1000 Ethernet Ports.
  • Power Method: Passive Power over Ethernet (48V), 802.3af/802.3at Supported (Supported Voltage Range: 44 to 57VDC).
Check Stock

Ubiquiti UAP-AC-LITE UniFi AP AC LITE 802.11ac Gigabit Dual-Radio PoE

  • Ubiquiti Networks 4 Pack UAP-AC-PRO UniFi Access Point - Mounting Bracket - Ceiling Backing Plate - 4x Flat Head Screws (M3x50) - 4x Keps Nut (M3) - 4x Screw (M2.9x20) - 4x Screw Anchor (M3x20) - 48V 0.5A Gigabit PoE with Mount Bracket - Power Cord - Quick Start Guide - Ubiquiti Networks 1 Year Limited Warranty.
  • Networking Interface: 2x 10/100/1000 Ethernet Ports.
  • Power Method: Passive Power over Ethernet (48V), 802.3af/802.3at Supported (Supported Voltage Range: 44 to 57VDC).
Check Stock

Ubiquiti UAP-AC-HD-5 Unifi Access Point (5-Pack)

  • Ubiquiti Networks 5 Pack UAP-AC-HD-US 802.11ac High Density Wave 2 Enterprise Wi-Fi Access Point - Wall/Ceiling Mounting Kit - Ubiquiti Networks 1 Year Limited Warranty.
  • Networking Interface: 2x 10/100/1000 Ethernet Ports.
  • Power Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported.
Check Stock

BV-Tech 24-Port Gigabit PoE+ Managed Switch with 2 Ethernet & 2 SFP Uplinks | High-Performance NDAA Compliant | POE-SW2404G-MG-PLUS

  • 【24 Gigabit PoE+ Ports for Powerful Connectivity】Equipped with 24 PoE+ (802.3af/at) 10/100/1000Mbps RJ45 ports, providing up to 30W per port with a total PoE power budget of 250W for a seamless network experience..
  • 【High-Speed Uplinks & SFP Expansion】Features 2 Gigabit Ethernet Uplink ports and 2 SFP Uplink ports (100/1000 Base-X) for high-speed connections, enhancing overall network performance and flexibility..
  • 【Wide Compatibility with 48V Active PoE】This 48V active PoE switch is designed for compatibility with a broad range of devices, but please note that it is NOT compatible with Ubiquiti devices that require 24V Passive PoE..
  • 【Reliable BV-Tech Premium Series】Trust in the quality and performance of our Made-in-Taiwan, NDAA Compliant PoE Switch for your networking needs..
  • 【100% Satisfaction Guarantee】Our 30-day Money-Back Guarantee and 1-Year Warranty ensure your peace of mind when choosing our premium, Taiwan-made, NDAA Compliant PoE Switch..
Check Stock

BV-Tech 10 Port PoE+ Gigabit Switch 8 PoE+ Gigabit Ports with 2 Gigabit Uplink – 96W – 802.3af/at Fanless Made in Taiwan NDAA Compliant

  • 8 PoE+ Gigabit Ports and 2 Gigabit Ethernet Uplink Ports, making network setups easier and more convenient..
  • PoE+ provide up to 30W per port, 802.3 af/at, 96 Watts Max Total Power. This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE..
  • BV-Tech Premium Series, Made in Taiwan, NDAA Compliant..
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support..
Check Stock

BV-Tech 6 Port PoE+ Switch 4 PoE+ Ports with 2 Ethernet Uplink and Extend Function – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing

  • 4 PoE+ Ports and 2 Ethernet Uplink Ports at 10/100Mbps each, making network setups easier and more convenient..
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15. 4W per port. 60W Max Total Power (includes 60W DC adapter)..
  • Extend function extending max PoE transmission distance from 100 meters to 250 meters.
  • PD detection will automatically detect and provide required power for your PoE devices **This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE. **.
  • 100% Satisfaction – 30-day Money-Back with 1 Year Warranty and Lifetime Tech Support.
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

PoE Texas | 802.3at to 24-Volt Converter | Easily Mix and Match 802.3at and 24-Volt Devices

  • Compatible with any IEEE 802.3at PoE+ Switch or Injector.
  • Dual purpose operation supports either 24-volts DC output with max 25-watts power on the 2.1mm DC or 24-volts power + gigabit data output on the RJ45.
  • Use to mix and match 802.3at and 24-volt passive devices like Ubiquiti on one switch or injector.
  • "Splits" Power and Gigabit data when used with the 2.1mm DC output.
  • Backed by our 1 year manufacturer warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

Ubiquiti POE POE-24-12W-5P - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter 5-pack

  • Ubiquiti PoE POE-24-12W - 24V DC 0.5A 12W - Power Over Ethernet Replacement PoE Adapter (5-pack).
  • Ubiquiti Networks POE-24-12W is for use with airMAX and UniFi products. It's a replacement 12V, 12W PoE adapter, with remote hardware reset circuitry..
  • The POE-24 (24V, 12W) features earth grounding/ESD protection, power LED, and is available in USA (NEMA 5-15). Remote re-start capability is a key....
  • PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable, they provide earth grounding and surge protection to help protect against....
  • The 24V, 0.5A models, POE-24-12W, are wall-mountable using the optional wall-mount brackets..
Check Stock

COOLM AC DC 48V 3A Power Supply Adapter 144W Charger 48V3A Switching Power Transformers Interface 5.5 x 2.5mm Suitable for POE Routers Switches Control Systems

  • Notice: Not applicable to all lithium battery products (eg: do not work for Electric bike bicycle, Bicycle eBike Lithium Ion Battery, Balance car,....
  • It only works with most 48V PoE switches / PoE injector CCTV cameras / LED Display. Please confirm the power plug model before you buy.
  • Output: DC 48V 3A 144W, DC interface size: 5.5mm x 2.5mm. DC cord Length: about 3.6FT/ 110cm.
  • Generation smart IC chip features: Short Circuit Protection, Overload Protection, Over Voltage Protection to protect your device.
  • What You Get: 1 * DC 48V 3A power supply with Cord, 2 Years Warranty and friendly customer service. Please feel free to Contact us at any time..
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • ...res optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable....
Check Stock

PoE Texas GPOE-6AB | 6-Port Gigabit Poe Injector for 802.3af or 24 Volt Passive Devices | Power Supplies Available Seperately

  • Instantly upgrade your network switch or router to PoE using this 6 Port PoE midspan injector.
  • Use to power IP Phones, Access Points, IP cameras that require 10/100 or Gigabit Data.
  • Passive “always on” power and data delivery options for Mode A or Mode B compatible with IEEE 802.3af or 24 volt passive PoE devices.
  • Power Supply NOT included - use with a UL certified 24v 48v or 56v power supply.
  • Backed by 1 year warranty - For expert technical support from Austin, TX please call 512 479 0317.
Check Stock

WiFi-Texas GPOE-8B-24v60w | 8-Port Gigabit PoE Injector for 24 Volt Passive Devices Like Ubiquiti & Mikrotik

  • Gigabit Power over Ethernet injector, 8 port wall mount with 24 volt power supply.
  • For 24 Volt devices like Ubiquiti UniFi UAP-AC-Lite and Mikrotik gigabit devices, 10/100/1000 speeds. Please check manufacturer specifications for compatibility..
  • Shares data and power on pins 4,5 and 7,8.
  • Instantly upgrade your network switch or router to PoE.
  • For expert technical support from Austin Texas, please call 512 479 0317.
Check Stock