Reviews Poe Bridge

Wireless Bridge Point to Point for 3KM Remote Transmission,Outdoor CPE PtP & PtMP with 14dBi High-Gain Antenna, 10/100Mbps Ethernet Port, 24V PoE, 2 Pack, for WiFi Extend/Surveillance Cameras

  • Better Wireless Signal Transmission and Reception: 5.8G long range wifi extender outdoor wireless bridge better than traditional CPE, the Ethernet physical rate is 10/100Mbps, Built-in 14dBi directional antenna can significantly improve the transmission and reception performance of wireless signals.
  • Easily Setup & Energy Efficient: The WIFI bridge is already paired, no manual pairing is required. Connect POE/DC power supply and you're ready to go. Our "wireless bridge kit" is adopting low power consumption design, supports dynamic MIMO power saving mode and 24V POE / 12V DC power supply, With US standard POE power plug and POE cable, suitable for North America.
  • Support WISP(Client + Router) & AP Modes: One works as AP mode and another works as Station mode to create a long distance point-to-point, point-to-multipoint wireless connection for CCTV surveillance and data transmission. Connect wirelessly to WISP station or hotspot to share the Internet over a local wired and wireless network. Dual modes solves the problem of long-distance signal transmission and makes you share the stable internet signal with your family or friends.
Check Stock

Outdoor Wireless Ethernet Bridge, KuWFi Long Range 5KM 11ac WiFi Bridge Point to Point Outdoor Get Faster Signal Built in Strong Powerful Antenna 5.8G High Speeds for PTP/PTMP丨2-Packs

  • KuWFi CPE550 Outdoor Wireless Bridge is a 5 GHz high-powered long-distance 11AC wireless outdoor AP/client bridge offering dual-PoE Ethernet ports and a high-gain directional antenna that emits a narrow signal beam, limiting interference and ensuring stable connectivity, high-bandwidth and 867 Mbps speeds over long distances[Ethernet Port: 10/100Mbps].
  • Easy to Use – Outdoor wifi bridge CPE with an LED display. Point to point pairing can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, support WiFi Coverage & Camera Surveillance(Point-to-Point/Multi Point or Multi Point-to-Multi Point).
  • High Performance Design – Powerful 18dBi High-Gain Antennas Extend Networks to 5 KM Point-to-Point, for line of sight wifi bridge. Optimal Bandwidth Supports Heavy Video Delivery Over Long Distances.
  • Easy to Install & Support PoE Power Supply – PoE Compliant Ports Offer Flexible Power Options for an IP Camera or AP, 360-Degree, 3-Axis Pivoting Arm Locks for Precision Alignment, for building to building wireless wifi bridge.
  • Customer Service – For 30 days after the date of purchase, return your undamaged KuWFi internet bridge and receive a full refund for ANY reason.12-month warranty for qualit....
Check Stock

Wireless Bridge Gigabit High Speed, Aitupal 5.8G 1Gbps Point to Point WiFi Outdoor CPE with 14dBi High-Gain Antenna, Lang Range Up to 5KM, Plug and Play, 48V PoE Power, IP65 Waterproof [2-Packs]

  • [Aitupal CPE512AC] is an 11ac Wave2.0 standard high power industrial 5.8G outdoor CPE Wireless Bridge. It comply with the next generation 802.11ac Wi-Fi standard, MU-MIMO, Qualcomm Chipset, combined 867Mbps high speed in 5.8G, equipped Gigabit RJ45 port and 48V PoE support, it can be applied in all over the world for long range PTP/PTMP.
  • [High Power, More Range] Long Range WiFi Bridge 512AC, Its RF power up to 25dBm, equipped with 14dBi panel antenna, the point to point wireless range up to 5KM distance.
  • [867Mbps Data Rate & Gigabit WAN/LAN Ports] the ethernet bridge features 802.11ac Wi-Fi and 2*2 MIMO technology, 867Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
  • [5GHz frequency, more channels] internet bridge with 4.92GHz to 5.92GHz frequency range, avoid the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
  • [Power over Ethernet] wireless bridge kit has integrated active 48V Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing netwo....
Check Stock

Wireless WiFi Bridge, UeeVii 5.8G Point to Point Outdoor 2KM Long Range CPE with 24V PoE Adapter 12dBi Antenna 2 * 100Mbps LAN/PoE RJ45 Port,2-Pack

  • This outdoor wireless bridge adopts AB automatic networking, you only need to transfer one end to A as the master bridge and the other end to B as the slave bridge to complete the pointtopoint dial-up pairing. The bridge was built in 2 100M network LAN/PoE port, and the highest network speed that can be reached is 100Mbps.
  • The CPE451 WiFi bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. At the same time, the bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability..
  • CPE451 point to point bridge adopts low power consumption, high-performance design, radio frequency index and radiation index are in full compliance with national standards. It supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD) to reduce equipment energy consumption..
  • This Internet bridge supports a 24V POE power supply, the construction is simplified, and it is safe and reliable. It is managed by AC, and all bridge pairing information is clear at a glance, which is convenient for centralized management and maintenance, and greatly simplifies the difficulty of maintenance. This wireless bridge can also be reused when yo....
Check Stock

TRENDnet 10dBi Wireless N300 Outdoor PoE Pre-configured Point-to-Point Bridge Bundle Kit, TEW-740APBO2K, 2 x Pre-configured Wireless N Access Points, IPX6 Rated Housing, Built-in 10 dBi Antennas white

  • POINT TO POINT BRIDGE:2 10 dBi Outdoor PoE Access Points with wireless N300 point-to-point networking (2.4 GHz).
  • PRECONFIGURED KIT: 2 x Preconfigured Wireless N access points. Reduce installation and setup time with this preconfigured and pre-encrypted long range wireless bridge kit.
  • POE POWER ADAPTER: Included power adapter provides power and data over a single Ethernet cable with a maximum distance of 60 m (197 ft.).
  • WIRELESS N300 (2.4 GHz): The N300 Oudoor access point kit is compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300 Mbps.
  • WIRELESS MODES: Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP (CAP) modes.
  • OUTDOOR READY: The PoE Access Point has a durable enclosure with an IPX6 outdoor weather rating. Operating Temperature of -20 - 60° C (-4 - 140° F)..
  • DIRECTIONAL ANTENNA: The 10 dBi Access Point has a built-in 10 dBi directional antenna.
Check Stock

MikroTik Cloud Router Switch Rack-mountable Manageable Switch with Layer 3 Features (CRS317-1G-16S+RM)

  • 11 Ports: Includes 6 (1-6) 802.3af/at POE ports(10/100Mbps), 2 (7-8) BT POE++ ports (1000Mbps), 2 Gb UpLink ports(10/100/1000Mbps) and 1 SFP Uplink port. The 2 uplink ports can be connected to different networks or devices, such as routers, NVRs, etc..
  • High POE Power: Comply with IEEE 802.3af/at/bt standard, Maximum support 120W high output power,1-6 port single port MAX output power is 30W, 7-8 port single port MAX output power is 60W, Used for more kind of high-power devices such as PTZ, Wireless bridge, PoE LED etc..
  • Built-in Surge Protection: 6KV lightning protection, 8KV electro-static, surge protection, short-circuit protection, over-temperature protection, over-current protection..
  • PoE Watchdog AI Function: Automatic detection, automatic restart, detects the power receiving port automatically, detected the dead device and restarts the device after power failure..
  • IP65 Waterproof: Industrial housing design, integrated top cover, PC/ABS high polymer alloy material, extraordinary toughness, waterproof indoor and outdoor full-time, make sure the switch can be used in the bad weather..
Check Stock

Cisco Catalyst 2960X-24PSQ-L Network Switch, 24 Gigabit Ethernet Ports (8 PoE), 110W PoE Budget, 2 10G SFP Uplink Ports, Enhanced Limited (WS-C2960X-24PSQ-L)

  • ETHERNET PORT CONFIGURATION: 24 10/100/1000 Gigabit Ethernet ports, 2 10G SFP uplink ports.
  • POWER: PoE+ support with a power budget of up to 110W and Perpetual PoE.
  • DEVICE MANAGEMENT: Web UI, over-the-air access via Bluetooth, CLI (command-line interface), SNMP (Simple Network Management Protocol), and RJ-45 or USB console access.
  • SECURITY: 802.1X, Switched Port Analyzer (SPAN), and Bridge Protocol Data Unit (BPDU) Guard.
  • PEACE OF MIND: Enhanced limited lifetime warranty.
Check Stock

CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Adapter

  • GOODTHREE CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the IEEE802.11a and IEEE802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional..
  • PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable..
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote ne....
Check Stock

Outdoor 900Mbps Wireless Bridge 5.8G 5KM Transmission WiFi Point-to-Point Wireless Ethernet Bridge Router with 2 RJ45 LAN Ports 2-Pack Factory Pairing Without Setting Plug and Play.

  • 900Mbps wireless bridge, 5KM ultra-long-distance transmission WiFi, you can perform point-to-point pairing by dialing without entering the GUI,....
  • 5.8G frequency band wireless transmission, avoiding the 2.4G frequency band commonly used by household and handheld devices, effectively reducing....
  • It supports two power supply modes: power adapter and Passive 24V PoE. Passive PoE power supply distance can reach 70 meters. It is easy to install....
  • Professional outdoor design, suitable for various harsh environments. Waterproof, high temperature resistance, low temperature resistance, dustproof,....
  • Every NICGIGA Wireless Bridge is rigorously tested for reliability, quality and performance. We provide a one-year warranty and lifetime technical....
Check Stock

5.8G Wireless Bridge PTMP WiFi PTP Point to Point Long Range Outdoor Wireless Access Point Extender Network CPE 2KM Transmission Distance with 12DBi Antenna 2 LAN 100MBps 24V PoE Power Supply 2 Pack

  • Bluedery CPE220 network bridge is a 5.8G Long Range Wi-Fi Extender Outdoor Wi-Fi Ethernet bridge with a digital display. It complies with the 802.11a and 802.11n, standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional..
  • PTMP Pre-programmed: The installation of this Wi-Fi outdoor extender aka long range outdoor wireless access point extender is very simple. Simply connect the both bridges to Poe adapters through the Ethernet cables, system will power on, and wait for 1 minute for the both equipment to pair and connect together, the "Link" green LED indicator will turn on to indicate that the both bridges have been paired successfully..
  • Using 5.8G / 100Mbps wireless transmission rate between wireless Ethernet bridge can support 1.2 miles transmission distance (Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network Wi-Fi access..
  • Long Range Wi-Fi Extender Point to Point Mode:....
Check Stock

Ueevii 5.8G Point to Point Wireless Bridge CPE451&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment

  • This outdoor wireless bridge adopts AB automatic networking, you only need to transfer one end to A as the master bridge and the other end to B as the slave bridge to complete the pointtopoint dial-up pairing. The bridge was built in 2 100M network LAN/PoE port, and the highest network speed that can be reached is 100Mbps.
  • Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
  • The CPE451 WiFi bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. At the same time, the bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability..
  • 360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
  • CPE451 point to point bridge adopts low power consumption, high-performance design, radio frequency index and radiation index are in full compliance with national standards. It supports dynamic MIMO power saving mode (DMPS) and automatic power-saving transmission (APSD) to reduce ....
Check Stock

TRENDnet 10dBi Wireless N300 Outdoor PoE Access Point TEW-740APBO Point-to-Point 2.4 GHz Multiple SSID AP WDS Client Bridge WISP IPX6 Rated Housing Built-in 10 dBi Directional Antenna

  • POINT TO POINT BRIDGE: 10 dBi Outdoor PoE Access Point with wireless N300 point-to-point networking (2.4 GHz).
  • WIRELESS N300 (2.4 GHz): The N300 Oudoor access point is compliant with 802.11b/g/n technology (2.4 GHz) with data rates up to 300 Mbps.
  • WIRELESS MODES: Supports Access Point (AP), Wireless Distribution System (WDS), Client Bridge + AP, Wireless ISP (WISP) + AP, CPE + AP, and control AP....
  • OUTDOOR READY: The PoE Access Point has a durable enclosure with an IPX6 outdoor weather rating. Operating Temperature of -20 - 60° C (-4 - 140° F).
  • DIRECTIONAL ANTENNA: The 10 dBi Access Point has a built-in 10 dBi directional antenna.
Check Stock

Ruckus Zoneflex P300 Outdoor Wireless Bridge (802.11ac, 5GHz, POE) 901-P300-US01

  • 802.11ac Point to Point or Point to Multi-Point Bridge, 5GHz Operation.
  • 20MHz, 40MHz, and/or 80MHz channelization, 14dBi internal directional antenna.
  • Ruggedized for outdoor conditions: -40°C to 65°C operating temperature, IP67 rated.
  • Automatic pairing and easy aiming between bridges, PD-MRC for reliable bridge connections.
  • 802.3af Power over Ethernet (POE) Simple installation with mounting brackets included.
Check Stock