Reviews Poe Adapter

iCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps

  • Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
  • This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
  • This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
  • This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
  • Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check Stock

Wasserstein PoE Power Adapter Compatible with Wyze Cam V3/Outdoor - Continuously Power Your Security Cam with USB Ethernet Adapter

  • POWER SOLUTION - The Wasserstein PoE Adapter continuously powers security camera for users who already have ethernet cables running throughout in their homes.
  • IDEAL FOR OUTDOOR CAMERA – Our PoE Adapter eliminates cable mess. With a single 3ft long micro USB cable bridged to security camera, you can feel free to deploy non-PoE devices with no nearby AC outlets.
  • WEATHERPROOF CABLE - Made of high-grade materials, the cable and pogo pin are weatherproof whilst the ethernet port (RJ45) is not.
  • EASY SET-UP - Simply connect the micro USB cable to the V3/Outdoor camera. The LED indicator will turn yellow while powering your security camera constently.
  • BOX INCLUDES - 1 x PoE adapter, 1 x silicone cover and 1 x user manual.
Check Stock

MokerLink 4 Port PoE Extender, IEEE 802.3 af/at PoE Repeater, 100Mbps, 1 PoE in 3 PoE Out, Wall & Din Rail Mount POE Passthrough Switch

  • 4 PoE Ports: Include 1 PoE In, 3 PoE Out, 10/100Mbps speed. POE transmission distance 100 meters..
  • IEEE 802.3 af/at: All ports support this standard PoE, Input Max 30W, Output Max 24W, Average 8W per port. PoE Voltage 44-57 Vdc. PoE pin: Input, 1/2 (-), 3/6 (+), 4/5(+), 7/8(-).
  • Unmanaged Plug & Play: Support power detection function, automatically detect devices, just plug in the ethernet cable, connect directly to the device, without configuration..
  • Easy Installation: No need for additional power adapter, powered by POE network. Support wall mount and din rail mount, small size, save space, suitable for more positions.
  • Widely Used: Support 3-level cascading, can connect poe AP, camera, phone and other POE devices, increase POE coverage at low cost.
Check Stock

LINOVISION Mini 2 Port POE Extender IEEE 802.3af/at POE Repeater Up to 1000ft Power Over Ethernet Over Cat5/6 Cable, POE Splitter to 2 POE Devices Like IP Cameras, IP Phone, Wireless AP

  • 【2-PORT POE SPLITTER】This 2-port POE extender is designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable..
  • 【UP TO 1,000FT POE + DATA EXTENTION】Extra 330ft POE+Data transmission will be extended with one Linovision POE Extender. And it supports two levels cascade deployment, therefore total 1,000ft POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • 【COMPLIANT TO IEEE802.3AF/AT STANDARD】This POE Extender works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE Outputs supply power to standard POE devices (don't support 24V POE Devices) , like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease..
  • 【EASY TO CONFIGURE IP CAMERA ON SITE】By interting this PoE-Extender02 to an existing PoE cable, ....
Check Stock

BV-Tech 6 Port PoE+ Switch 4 PoE+ Ports with 2 Ethernet Uplink and Extend Function – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing

  • 4 PoE+ Ports and 2 Ethernet Uplink Ports at 10/100Mbps each, making network setups easier and more convenient..
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15. 4W per port. 60W Max Total Power (includes 60W DC adapter)..
  • Extend function extending max PoE transmission distance from 100 meters to 250 meters.
  • PD detection will automatically detect and provide required power for your PoE devices **This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE. **.
  • 100% Satisfaction – 30-day Money-Back with 1 Year Warranty and Lifetime Tech Support.
Check Stock

Mikrotik RouterBoard mAP RBmAP2nD micro Access Point wireless Dual-Chain

  • The mAP also known as RBmAP2nD is a micro wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities.
  • It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack.
  • The mAP also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
  • 650MHz CPU, 64MB RAM, 2xEthernet, PoE out, Antenna 1.2dBi built in, Dimensions 68x68x19mm, Ethernet 2x 10/100 Mbit/s Ethernet with Auto-MDI/X.
  • Included parts: 24V 0.8A power adapter, microUSB type B to USB type A adapter.
Check Stock

CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point to Point Access Outdoor Network CPE 2KM Transmission Distance with 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Adapter

  • ...aving to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional..
  • PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable..
  • Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access..
  • Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitte....
Check Stock

Ubiquiti Networks US-8-60W UniFi 8-Port Gigabit PoE Compliant Managed Switch

  • 8 Port Gigabit PoE Switch (4 Ports 802.3af PoE)..
Check Stock

Ubiquiti Networks 6 Pack UAP-AC-PRO UniFi Access Point Enterprise Wi-Fi System

  • WiFi 4/WiFi 5/WiFi 6/WiFi 6E (2.4/5/6 GHz bands).
  • Powered with PoE+ (PoE adapter optional).
Check Stock

Gigabit PoE Splitter 12V 2A Output with IEEE 802.3af/at Standard Compliant 10,100,1000Mbps Power Over Ethernet Splitter Adapter for Security Camera CCTV Surveillance 5.5×2.1mm DC Plug Cable(PS5712TG)

  • Instantly add PoE to your network switch or router. This small, compact mountable PoE injector screws into the wall near an outlet or to the underside of desks, reducing clutter and offering versatility for your setup..
  • Power IP security cameras, VoIP desktop phones, WiFi access points, and other devices that accept passive 802.3af using a data network cable and this passive Power over Ethernet adapter / single port injector..
  • This midspan injector includes a UL certified 48 volt, 15 watt DC power supply to power devices labeled ‘802.3af’. Delivers power up to 328 ft from the injector site. Compatible PoE devices must have a wattage of 15w or less..
  • Plug and play. Our single port PoE adapter transmits 10/100/1000 Gigabit data, delivering lightning fast wired speeds with no loss of signal quality via one Data In port and one Data + Power Out port..
  • All of our PoE products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

BV-Tech 6 Port PoE+ Gigabit Switch (4 PoE+ Gigabit Ports with 2 Gigabit Uplink and Extend Function) – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing

  • 4 Gigabit PoE+ Ports and 2 Ethernet Uplink Ports at 10/100/1000 Mbps each, making network setups easier and more convenient..
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port. 60W Max Total Power (includes 60W DC adapter)..
  • Extend function extending max PoE transmission distance from 100 meters to 250 meters.
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock

PoE Texas 24 Multi Port PoE+ Injector with 48v 240w Power Supplies - 10/100/1000 Gigabit Passive Power Over Ethernet Means Versatility - 30W PoE Injector for WiFi Access Point PTZ Camera IP Phone

  • Save big on network upgrades and installations using this 24 port gigabit midspan PoE injector. Use it to power up to 24 IP cameras, desktop phones, WiFi Access Points, or other low voltage devices through a network data cable..
  • Instantly upgrade your network gigabit switch to PoE/PoE+. No need to purchase a larger 24 port switch. You can rely on your smaller, more cost-effective PoE switch and simply add Power + Data using the 802.3at PoE injector..
  • With this passive PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch. Passive PoE power is ‘Always On’ with power delivery on Mode B pins (-4,5 +7,8)..
  • Plug and play. Our 24 port PoE adapter / injector transmits 10/100/1000 gigabit data, delivering lightning fast wired speeds with no loss of signal quality, up to 328 feet. Input voltage range: 48-56 Volts DC. 30 Watt output per port..
  • All of our PoE power injector products are backed by a One Year replacement warranty and a 30 Day, no questions asked, return policy. Expert help is only a phone call away. Please call 512 479 0317 for assistance..
Check Stock

Ubiquiti UniFi U6 Enterprise Access Point | US Model | PoE Adapter not Included (U6-Enterprise-US)

  • WiFi 4/WiFi 5/WiFi 6/WiFi 6E (2.4/5/6 GHz bands).
  • Powered with PoE+ (PoE adapter optional).
Check Stock