Reviews Pneumatic Waste Oil Extractor

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

  • 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

Aocoom-QingCang 6.5 Liter Oil Changer Vacuum Transmission Fluid Extractor Pneumatic/Manual Fluid Evacuator with Pump Tank Remover and Brake Bleeding Hose Engine Oil Change & Fluid Change Tool

  • 【2 USAGES】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 1*3.5 ft flexible hose and 3 * 3.39ft extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【EASY to USE】With oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil at any time. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock

OEMTOOLS 24938 9.5L Pneumatic/Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator

  • Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
  • Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
  • Manually suction fluid with the engine oil pump's oversized handle.
  • Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
  • The built-in shutoff prevents overfilling the extractor pump reservoir.
  • Time Flies: Draining oil from beneath a vehicle takes eons.
  • The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
  • Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
  • This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.
Check Stock

Jackma555 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation + Brake Bleeder Hose

  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! With the Oil Extractor Pump, you no longer have to lift or crawl under the car to do fluid changing, and there is no mess to clean afterward..
  • 【 2 Operating Modes 】 The fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the oil transfer pump into a high-speed oil changer while the manual mode requires no other equipment to use..
  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at pneumatic mode and leaves no mess to clean afterward..
  • 【Wide Application 】 Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable on cars, lawn mowers, boats, jet skis and etc. It is perfect for working on cars in the garage or automobile repair shops..
  • 【 Note】Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor. If there is any problemor concern with our products, please contact us for assistance..
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

EONLION Oil Change Vacuum Fluid Extractor 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Oil Transmission Coolant Change Tool Easy-to-Use Hand Pump Extract Fluid Through Dipstick Tubes

  • 【 Speedy Extraction 】 Fast suction and extraction speed of 1.8L /min. The oil changer extracts engine oil in a 4 cylinder car within minutes at....
  • 【 2 Options Usage 】 Fluid evacuator equips with pneumatic and manual mode to fit any condition. The pneumatic mode turns the pump into a....
  • 【No Oil LEFT】Vacuum Fluid Extractor comes with 4 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be....
  • 【 Plus Version 】 Upgraded accessories, upgraded convenience. This fluid extractor comes with storage unit for collecting hoses when not in use,....
  • 【 Work Freely 】 Not limited to places, change oil anytime and anywhere! Perfectly extracts most fluid types: engine oil, transmission fluid, gear....
Check Stock

EWK Patented 10.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
Check Stock

Trac Outdoors Hand Held Fluid Extractor - Ideal for Nearly All Forms of Fluid Extraction - Includes Cap, Adapters and Hoses (69360)

  • 【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
  • 【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
  • 【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
  • 【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump

  • Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
  • Easy to Operate: The pneumatic way for higher speed of oil change.
  • just need to connect with air compressor. Easy to do the oil / fluid changing for....
  • Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
  • Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
  • Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

  • ...l, power steering fluid, engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
  • Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
  • Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
  • 3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.
Check Stock