Craftsman N286039 Air Compressor Drain Valve Genuine Original Equipment Manufacturer (OEM) Part
- Central Pneumatic Harbor Freight Air Compressor Head Gasket Kit with Stainless Steel valves..
- This is a rebuild kit that contains 2 pieces of reed valves and 1 pieces of head gasket..
- During installation, it is absolutely necessary to install/locate the lower valve with a little grease/vaseline. Failure to do so can cause the valve to break prematurely..
- A brand-new, unused, unopened, undamaged item in its original packaging..
- If your compressor looks like the photo, this kit will more than likely fit your machine..
Check StockLC LICTOP Brass Sintered Bronze Breather Vent Flat Pneumatic Muffler Filter,1/4" NPT (Pack of 10)
- Easy to install and high lift to reduce results, fast and reliable connection.
- They are suitable for manual valves, solenoids, exhausts, vacuum generators, crankcases, steering boxes..
- The silencer/muffler is used to reduce the dynamic noise of the exhaust of pneumatic components or equipment..
- Commonly used in single-acting cylinders or valves to prevent dust and foreign particles from entering the port to the atmosphere..
Check Stockuxcell Nickel-Plated Copper One Way Air Check Valve G 1/4 Female Threaded Full Port Check Valve 2Pcs
- Function: the check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air.
- Material and size: the one way check valves are made of PVDF, sturdy, wear-resistant and durable for long-term use.
- Each check valve measures 6.3 mm/ 1/4 inches, the total length is 38 mm/ 1.50 inches.
- Features: the pipe port of the check valve is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
- Easy to install: the non-return check valve is easy to install, convenient for you to unscrew and replace.
- Application: the non-return check valves are widely applied for automotive parts, machinery industry, household appliances, agriculture, etc..
Check StockPiutouyar 3Pcs Air Pneumatic Mufflers 1/4\ Male Thread Hex Sintered Silencer Brass Exhaust Muffler Filter Air Line Fitting
- WHAT WILL YOU GET - You will get 3pcs sintered brass filter. Thread size is 1/4". Sintered pneumatic muffler height is 26mm. The max diameter is 15mm. Maximum pressure is 300PSI, max operating temp is 35F to 300F..
- HIGH QUALITY MUFFLER - Pneumatic exhaust muffler are made of high quality brass, thicker and more durable. Brass silencer is stronger than other materials silencer, it is not easy to rust, wear-resistant, not deformed and anti-corrosion..
- MULTIPLE USAGE - Pneumatic silencer muffler widely used for air cylinders, cylinders, solenoid valves, crank cases, gear boxes, oil tanks and pneumatic tools. After installing the sintered brass filter, high noise reduction effect, the noise level during the operation of the equipment can be reduced, improve the user's sense of use..
- PERFECT DISIGN - The compressed air silencer adopts an outer hexagonal design, and you can easily install and remove it with a wrench. Improve your work efficiency and save your precious time and energy. The noise silencer has smooth edges and meticulous workmanship, deeper and smoother threads to ensure quality..
- QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you h....
Check StockOasisSpace Pneumatic Rubber Rollator Walker with Seat - 12\ Wheel Beach Aluminum Rollator Walker for Outdoors, Mobility Walking Aid for Elderly
- PNEUMATIC RUBBER TIRES - OasisSpace Rollator walker features 12” front pneumatic rubber tires and 10” rear tires perfect enable safe and comfortable movement on all surfaces and make this rolling walker the perfect choice for people who need a mobility aid but still spend a lot of time outdoors..
- IDEAL FOR TRAVELLING - The outdoor walker comes with compact design allow you walk in the narrow place,canteen,airplane etc. when folded, this rollator walker with seat can be taken anywhere. The rollator has a spacious seat as well as a comfortable backrest and therefore offers the perfect opportunity for a short rest on your excursions..
- ADJUSTABLE HEIGHT - The handles of the walker are height-adjustable between 33.4" and 37.4" to perfectly fit your needs. The pressure of the pneumatic wheels can be easily adjusted via the standardized Schrader / American valves, which allows everyone to find the individually perfect compromise between smoothness and damping..
- LOCKING HAND BRAKES - Pneumatic Rubber Rollator Walker are so easy to use and comfortable on the hands. Simply squeeze to control the speed and push down to lock the brakes in a locked and parked position..
- GURANTEE - All OasisSpace rolling walkers come with a standard one year warranty, We offe....
Check StockEONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox
- Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
- Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
- Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
- Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
- Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check StockKarcy Pack of 100 Brass 1/4\ NPT Flat Pneumatic Muffler Filter Silencer Fitting
- ►【FEATURE】- Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust..
- ►【UNIVERSAL DESIGN】- Brass Exhaust Muffler Thread Outer Diameter : 1/4NPT.
- ►【ADVANTAGE】- Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the frequency of the original airflow, thereby reducing noise..
- ►【 MATERIAL】- Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction.
- ►【APPLICATION】- Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within noise requirements..
Check StockSMC NAD402-N04 Auto Drain Valve, 1/2\ NPT
- Typical Application:Instrumentation, hydraulic and pneumatic systems.
- Heavy duty Viton seal for long term safety.
- Material:Brass bodies, steel handles except where noted..
- Polyline valves have brass bodies and brass handles..
Check StockZLYY 5Pcs 1/4 Male Thread Pneumatic Silencer Muffler Fitting, Top Adjustable Air Flow Speed Controller, Sintered Bronze Exhaust Muffler
- FEATURES: Sintered Bronze Exhaust Muffler used to reduce dynamic noise of the pneumatic components or device exhaust..
- SPECIFICATIONS: Brass Exhaust Muffler Thread Outer Diameter : 1/4 PT.
- APPLICATION: Pneumatic Muffler used to diffuse air and muffler noise from the exhaust ports of air valves, air cylinders and air tools to an acceptable level within OSHA noise.
- ADVANTAGE: Sintered bronze filter element designed in many small holes drilled in the pipe wall, When the air flows through the small holes, gradually changing the audio frequency of the original airflow, thereby reducing noise..
- HIGH QUALITY MATERIAL: Bronze Exhaust Muffler made of copper, high pressure resistant, not easy to rust, not easy to trip, better noise reduction.
Check StockFeelers 1/2 One Way Inline Check Valve Non-Return One-Way Air Water Gas Check Valve Ozone Resistance PVDF Pack of 4
- 【Material】The one way check valves are made of PVDF, and the Diaphragm material is silicon rubber..
- 【Function】 These 1/2 Inch check valves are applicable for fluid systems to stop countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air..
- 【Size】Diameter: 1/2"barb, can fit 1/2" hose ID.
- 【Performance】Strong Resistance to acid, alkali, salt corrosion ability, can be used for different types of liquid.Normal performance under 25 ℃ to 60 ℃..
- 【Wide Application】Widely used in water treatment, air purification, automotive parts, machinery industry, medical equipment, household appliances and other fields..
Check StockPSCCO 8PCS Air Pneumatic Mufflers 1/4'' Bronze Exhaust Muffler Silencer
- Package includes: 5 sintered bronze mufflers, 1 teflon tape.
- Mufflers utitlize porous sintered bronze filter element secured to standard pipe fittings..
- Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
- Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.
Check Stock5 Pieces Pneumatic Ball Valve Push to Connect Fittings Ball Valve PVC Air Flow Control Valve Air Fittings Straight Quick Connect Union Air Quick Connect Air Hose Fittings (1/4\ x 1/4\ OD)
- Size Information: you will receive 5 pieces of black air line valves, classic combinations can meet your daily use.
- At the same time, the size is 1/4 inch OD, please read our information sheet and consider whether the size fits.
- Quality Material: pneumatic fittings with reliable plastic materials and copper, not easy to fall off after connection.
- They don't break easily, and have nice sealing performance, not easy to leak.
- Air valve can be applied for a long time.
- Working Pressure: quick connect tube fittings can be applied to water (maximum pressure: 50 PSI) and air (maximum pressure: 145 PSI).
- When be applied with water, the pressure shall not exceed 50 PSI, and operating temperature: 32 to 140 Fahrenheit.
- Easy Operation: after installation, you can freely change the direction of the push to connect fitting without manually inserting or pulling.
- They are easy installation, flexible, save space, freely rotate, release ring ellipse design, easy disassembly.
- Wide Applications: quick connect air hose fittings are suitable for air duct, pneumatic tools and so on, you can use them to connect others and different pneumatic components.
- They are suitable for PU/ PA/ PE/ PVC products.
Check StockQuickun Air Pneumatic Mufflers 1/4 Male Thread Sintered Bronze Exhaust Muffler Silencer Pack of 3
- G-thread size: 1/4". Each package includes 3 sintered bronze mufflers..
- Easy to install and maintain, particularly suitable where space is limited. High noise reduction effect..
- Widely used for Cylinders, Air cylinders, Solenoid valves, Crank cases, gear boxes, oil tanks, Pneumatic tools.
Check Stock