Reviews Pneumatic Valve Positioner

CASTNOO for LS Valve Seal Installation Tool 2 piece set 4.8 5.3 5.7 6.0 6.2 Springs Suitable for LS Racing

  • ☞Function: A spring positioner is required. When the bronze rail is separated, the LS valve stem seal can prevent unnecessary oil from entering the combustion chamber..
  • ☞Installation: The operation is simple and convenient, and the valve seal can be easily installed when replacing the spring..
  • ☞Application: The valve seal installation tool can be used for stock powder metal and bronze rails..
  • ☞Protector: This tool allows you to slowly press the seal without damaging the seal..
  • ☞Service quality：100% service guarantee, if you encounter any problems, please contact us in time, we will deal with you as soon as possible..
Check Stock

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

  • 【FOOD-GRADE 304 STAINLESS STEEL】 - The pneumatic butterfly valve comprises 304 stainless steel material, no odor, high strength, and good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak..
  • 【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
  • 【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
  • 【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
  • Environment temperature: 14 °F to 176 °F.
  • Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
  • 【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, an....
Check Stock

VEVOR Air Jack, 5 Ton/11000 lbs Triple Bag Air Jack, (Blue) & Air Jack, 3 Ton/6600 lbs Triple Bag Air Jack, Air Bag Jack Lift Up to 15.75 Inch, 3-5S Fast Lifting Air Bag Jack (Blue)

  • Product 1: Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 5.7"/ 145 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Product 1: Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place..
  • Product 1: Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process..
  • Product 1: Space-saving Design: Carrying handle design fits the shape of the hand, so you can fully control the jack when you use it. And the whole structure is compact and easy to store. So you can take it outdoors conveniently..
  • Product 2: 6600lbs/15.75'' Max Weight/Height: The pneumatic jack capacity: 6600 lbs/3T. And it's lifti....
Check Stock

Sandblaster Gun Sandblasting Cabinet Foot Valve Sand Blasting Media Kit Sand Blaster Machine Accessories

  • 【Sandblasting Gun】Specially used for polishing, painting and sanding various dead ends of light metals and small metals, rough edges and rusty details, as well as paint peeling, tiles, car surface treatment, glass etching, etc..
  • 【Foot Switches】1/4"NPT Pneumatic Foot Pedal Valve Kit 3 Way 2 Position Threaded Rubber Nonslip Pressure Control with 6mm Pneumatic Fittings..
  • 【Material 】Made of aluminum alloy, the foot pedal eliminates hand fatigue and adds more precise control over the flow of sandblasting media. The kit allows you to blast for longer periods of time without having to take breaks due to hand fatigue..
  • 【Support a variety of sandblasting media】. Suitable for (46-240#) purpose non-metal sandblasting media, baking soda or glass beads, sodium bicarbonate, silica, walnut, garnet, etc. Please make sure to use the correct abrasive for your project..
  • 【Package specifications】Sandblasting gun*1, ceramic nozzle*1, pneumatic foot valve*1. Tips. Please wear gloves and other protective equipment to ensure safe operation, and please do not point the sandblasting gun at people or animals..
Check Stock

Farm Jack | 48\ High Farmer Lift Tractor Off Road Truck SUV Bumper 3.5 Ton

  • Labor-Saving Jack: The pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.5"/ 140 mm. Maximum height: 15.75"/400 mm. It only takes 3-5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere..
  • Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The relief valve in the middle ensure the injected gas is not excessive to ensure the security of the use process..
  • Portable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk..
  • Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, min....
Check Stock

Bestauto Pneumatic Car Jack 6600lbs Heavy Duty Air Jack Lifting Height Up to 16 Inch

  • Labor-Saving Jack: The pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.5"/ 140 mm. Maximum height: 15.75"/400 mm. It only takes 3-5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere..
  • Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The relief valve in the middle ensure the injected gas is not excessive to ensure the security of the use process..
  • Portable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk..
  • Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, min....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

Dual-Head Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Micro Engraer for Jewelry Crafts and Wrought Iron

  • 【Technical Parameter】Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • 【Precise & Adjustable Gauge】The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • 【Ergonomic Design】Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • 【Easy-to-operate Panel】Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • 【Various Application】Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

Mophorn Triple Bag Air Jack 6600lbs Pneumatic Jack 3 Ton Car Jack Lifting Up to 16 Inch Portable Repair(Blue)

  • Labor-Saving Jack: The pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.5"/ 140 mm. Maximum height: 15.75"/400 mm. It only takes 3-5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere..
  • Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The relief valve in the middle ensure the injected gas is not excessive to ensure the security of the use process..
  • Portable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk..
  • Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, min....
Check Stock

VEVOR Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Double-Head Micro Engraver for Jewelry Crafts and Wrought Iron

  • Technical Parameter: Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • Precise & Adjustable Gauge: The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • Ergonomic Design: Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • Easy-to-operate Panel: Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • Various Application: Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

ZUFECY Bike Valve Core Repair Tool for Schrader Presta, Valve Core Remover Tool tubeless Bicycling Tires (Red)

  • Valve Core Removal Tool: Quickly and easily remove cores. Suitable for Tightening or removing valve cores on bicycles, cars, luggage and any other pneumatic tires..
  • 3 in 1 functions: Tiny park tool designed to remove tire valve, inner tubes and valve extenders..
  • Non-Corrosive: Presta schrader valve are copper-nickel plated for high corrosion resistance, long life and safety. In addition, it is easy to insert-replacing..
  • Universal Presta valve cores, compatible with any Presta/Schrader/Presta Extender/Tube Tire Valve Tools. (Not all valve are removable).
  • Lightweight and compact for easy storage..
Check Stock