Reviews Pneumatic Cylinder Tube

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Sydien 20mm Bore 250mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 4Pcs Pneumatic Quick Fitting

  • Package Content: 1 Pcs x Mini Pneumatic Cylinder with 1 Pcs x Y Connector & 4 Pcs x Pneumatic Quick Fitting..
  • Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out..
  • Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion..
Check Stock

Hatsan BullBoss PCP Air Rifle, .22 Caliber

  • QuietEnergy technology with integrated sound moderator.
  • Quattro Trigger - 2-stage fully adjustable match trigger.
  • Max Velocity* – Lead-Free Pellets – .22 cal – 1220 FPS.
  • Max Velocity* – Lead Pellets – .22 cal – 1100 FPS.
  • Max Muzzle Energy* – .22 cal – 46 FPE.
  • Disclaimers: * Velocity & energy results may vary due to pellet weight, pellet shape, pellet material, temperature, elevation, as well as other factors.
  • Detachable air cylinder tube (230cc) (Spare cylinders are available).
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock

5PCS Double Cut Carbide Burr Set - 1/4 Inch Shank 10MM Head Die Grinder Bits Solid Carbide Rotary Burr File Set for Die Grinder Drill, Metal Carving,Polishing,Engraving,Drilling (Double Cut)

  • 【Shape】5pcs Double Cut cylinder Total length 54 - 65mm, shaft - 6mm(1/4" Inch), outer diameter of the tip - 10mm,tip blade length 10 - 20mm.
  • 【High Quality】 Made of heat-treated tungsten carbide YG8that lasts 10 times working life than HSS , suitable for machining variouskinds of metal material including ≤HRC70 hardened steel.
  • 【Multipurpose Tools】 Widely used for metalwork, tool making, engineering,model engineering, wood carving, jewellery making, welding, chamferring,casting, deburring, grinding, cylinder head porting and sculpting.
  • 【Easy to Use】 Generally can be used with handheld electric or pneumatic tool drive (can also be used in machine tool, and the speed of the electric/pneumatic tools usually about 6000-50000 RPM.
  • 【Satisfaction】 Packed with a transparent plastic tube for safety storageand protection.KaunnoI aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems..
Check Stock

Ideal Security Pneumatic Lock for Screen Door with Chain, White (1.25-2 Inches)

  • Door Stopper: This air pressure door closer for out-swinging doors is ideal for heavy-duty storm doors that are 1.25-2 inches thick.
  • Adjustable and Easy to Install: This door latch easily screws onto the door and can be installed either at the top, bottom, or in the middle and the wide base jamb bases provide extra strength.
  • Convenient Design: This storm door latch has a cylinder tube which is 1.5 inches in diameter and 10.5 inches in length and has a seasonal adjustment.
  • Smooth Closing: The door closing is adjustable with this pneumatic door closer and can be adjusted with the air screw at the end of the cylinder.
  • Includes: This door security system has a closer, wide-base jamb bracket and wind chain.
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

Pneumatic Clamp G1 8 Cylinder Pneumatic Hold Down Clamp Wide Application Easy to Use for Home Furniture

  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
Check Stock

Pneumatic Air Cylinder, Double-Acting Cylinder 10mm Diameter 100mm Stroke Pressure 1Mpa Made of Stainless Steel

  • 【SPECIFICATION】 Fluid: Air, Type: Double-acting, Cylinder Diameter: 10mm, Stroke: 100mm, Pipe Size: M5 * 0.8, Pressure: 1Mpa.
  • 【MATERIAL】 The cylinder made of high quality stainless steel, the pneumatic cylinder has long service life.
  • 【FEATURE】 This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • 【PRACTICAL】 Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage.
  • 【SERVICE】 If you have any questions or need any suggestions about the products we have sold, please feel free to contact us, we will provide you with quality after-sales service..
Check Stock

Pneumatic Cylinder Clamp, Iron Easy to Operate Shorten Test Time Cylinder Pneumatic Hold Down Clamp G1/8 for Home Decoration

  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
Check Stock

Pneumatic Clamp,Pneumatic Clamp G1/8 Professional Cylinder Pneumatic Hold Down Clamp HS 10101‑A GH101A for Home Decoration

  • 【Improve Production Efficiency】The cylinder pneumatic hold down clamp can shorten test time and improve production efficiency..
  • 【Realize Automatic Control】Our cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • 【Iron Material】This pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • 【Ensure Machining Accuracy】This productt can reduce the labor of workers, help ensure workpiece machining accuracy..
  • 【Wide Range of Uses】It is widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
Check Stock

FOUR UNCLES Oil Changer Vacuum Fluid Extractor Pneumatic/Manual 6.5 Liter with Pump Tank Remover and Brake Bleeding Hose Convenient Oil Change & Fluid Change Tool No Leaks No Overfills

  • 【2 WAY USAGE】Pneumatic and manual mode to fit any condition. The pneumatic mode provides higher speed while manual mode requires no other equipment to work with..
  • 【SPEEDY EXTRACTION】Fast extraction speed of 1.8L /min. The oil change pump extracts engine oil in a 4 cylinder car within 5 minutes at pneumatic mode..
  • 【NO OIL LEFT】 Vacuum Fluid Extractor comes with 5 kinds of tubes with different diameter go into the bottom of oil pan. The fluid extractor can be used to remove fluids from engine oil to brake fluids. It has a 6.5L reservoir, 3.28 feet flex hose and 3 extra dipstick hoses to reach the very bottom of the reservoir and suck up every drop of oil..
  • 【Easy to Use】With FOUR UNCLES oil extractor, you don’t have to get under the car anymore to do fluid changing and there is no mess to clean afterward. Just simply open the hook and insert tube to change engine oil..
  • 【WORK FREELY】Not limited to places, change oil anytime, anywhere. Perfect for working on a car in the garage, also suitable for using outdoors on boats, truck, or lawn mowers..
Check Stock