Reviews Pneumatic Cylinder Fittings

TAILONZ PNEUMATIC 32mm Bore 25mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA32-25

  • 【Model】Pneumatic Small Thin Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

Strongway 1 1/4-Ton Air Bumper Jack

  • Constructed of high-grade steel and built to exacting standards for quality and durability.
  •  Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil, grease and dirt-resistant for easy cleanup.
  • Heavy-duty pneumatic cylinder system uses standard 1/4in. NPT air fittings and requires an 80-120 PSI working pressure to operate.
  • 37.4in. x 37in. base provides maximum support and stability.
Check Stock

Sydien 20mm Bore 250mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 4Pcs Pneumatic Quick Fitting

  • Package Content: 1 Pcs x Mini Pneumatic Cylinder with 1 Pcs x Y Connector & 4 Pcs x Pneumatic Quick Fitting..
  • Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out..
  • Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion..
Check Stock

Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (1/4 Inch OD)

  • You are provided: the package comes with 7 pieces 1/4 inch direct pneumatic parts (PU), 7 pieces 1/4 inch V two-way parts (PV), 7 pieces 1/4 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
  • 4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Different styles can suit different pneumatic piping needs.
  • Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
Check Stock

Push to Connect Fittings Air Line Pneumatic fittings Kit 28 Pieces Air Quick Disconnect Tube Truck Fittings Release Connectors Air Hose Tube Union 7Spliters+7Elbows+7Tee+7Straight (3/8 Inch OD)

  • You are provided: the package comes with 7 pieces 3/8 inch direct pneumatic parts (PU), 7 pieces 3/8 inch V two-way parts (PV), 7 pieces 3/8 inch T tee parts (PE) and 7 pieces Y tee parts (PY), practical combination can well meet your daily use.
  • 4 Different types: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Different styles can suit different pneumatic piping needs.
  • Reliable plastic: the push connect air fittings are made of reliable plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Convenient to operate: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Extensive applications: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic component....
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock

Pneumatic Clamp G1 8 Cylinder Pneumatic Hold Down Clamp Wide Application Easy to Use for Home Furniture

  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
Check Stock

Pneumatic Air Cylinder, Double-Acting Cylinder 10mm Diameter 100mm Stroke Pressure 1Mpa Made of Stainless Steel

  • 【SPECIFICATION】 Fluid: Air, Type: Double-acting, Cylinder Diameter: 10mm, Stroke: 100mm, Pipe Size: M5 * 0.8, Pressure: 1Mpa.
  • 【MATERIAL】 The cylinder made of high quality stainless steel, the pneumatic cylinder has long service life.
  • 【FEATURE】 This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • 【PRACTICAL】 Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage.
  • 【SERVICE】 If you have any questions or need any suggestions about the products we have sold, please feel free to contact us, we will provide you with quality after-sales service..
Check Stock

Pneumatic Cylinder Clamp, Iron Easy to Operate Shorten Test Time Cylinder Pneumatic Hold Down Clamp G1/8 for Home Decoration

  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes (Blue,3/8 Inch Od)

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock