Reviews Pneumatic Butterfly Valve

DERNORD 2 Inch Tri Clamp Sanitary Butterfly Valve, Pneumatic Actuator Valve SS304 with Single Acting

  • Pneumatic Butterfly Valve Material: Stainless Steel 304.
Check Stock

VEVOR Sanitary Butterfly Valve 2 Pack Stainless Butterfly Valve 1.5\ Tube Outer Diameter Triclamp Butterfly Valve 304 Stainless Steel Sample Valve Tri Clamp with Pull Handle for Controlling the Fluid

  • 1.5" Butterfly Valve: The outer diameter of the butterfly valve pipe is 38 mm, and the size of the clamp sleeve is 50.6 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid in the process of opening, closing, and adjustment..
  • 304 Stainless Steel: The 304 stainless steel of the sanitary butterfly valve makes the valve with high toughness and high hardness. Besides, our butterfly valve has passed the 100% pressure hydraulic reliability test, with a rubber ring inside to ensure the sealing, so the liquid is not easy to leak..
  • Durable Pull Handle: The rotary handle of the stainless butterfly valve can meet the needs of locking three different valves positions. Different valves positions have different flow rates. You only need to turn the handle. The nylon sleeve on the handle can reduce friction and make the rotation more smooth..
  • Excellent Performance: Our triclamp butterfly valve can withstand 15 °F to 200 °F temperature, so don't worry about melting at high temperature. At the same time, it is equipped with stronger pressure resistance and higher adaptability, which can hold 1.6mp maximum pressure..
  • Extensive Usage: Our food-grade sanitary butterfly valve can be used to control the flow of various fl....
Check Stock

DERNORD Sanitary Butterfly Valve Repair Kit, Silicone Seat w/ (2) Bushings - for 1-1/2\ Valves

  • Size (spec): for 1-1/2" Sanitary Butterfly Valve.
  • This sanitary butterfly valve repair kit is mainly suitable for DERNORD butterfly valve.
  • Temperature Rating (spec): 15°F thru 200°F.
Check Stock

VEVOR Bag Air Jack 11000lbs Capacity Pneumatic Jack Quick Lift 5T & Mophorn Pneumatic Jack 3 Ton Triple Bag Air Jack Lifting Height Pneumatic Air Jack 6600LBS Capacity Extremely Fast Lifting Action

  • Product 1: Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 5.7"/ 145 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Product 1: Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place..
  • Product 1: Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process..
  • Product 1: Space-saving Design: Carrying handle design fits the shape of the hand, so you can fully control the jack when you use it. And the whole structure is compact and easy to store. So you can take it outdoors conveniently..
  • Product 2: Labor-Saving Jack: Pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.3"/135 mm. Maxim....
Check Stock

VEVOR Air Jack, 5 Ton/11000 lbs Triple Bag Air Jack, (Blue) & Air Jack, 3 Ton/6600 lbs Triple Bag Air Jack, Air Bag Jack Lift Up to 15.75 Inch, 3-5S Fast Lifting Air Bag Jack (Blue)

  • Product 1: Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 5.7"/ 145 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Product 1: Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place..
  • Product 1: Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process..
  • Product 1: Space-saving Design: Carrying handle design fits the shape of the hand, so you can fully control the jack when you use it. And the whole structure is compact and easy to store. So you can take it outdoors conveniently..
  • Product 2: 6600lbs/15.75'' Max Weight/Height: The pneumatic jack capacity: 6600 lbs/3T. And it's lifti....
Check Stock

Sandblaster Gun Sandblasting Cabinet Foot Valve Sand Blasting Media Kit Sand Blaster Machine Accessories

  • 【Sandblasting Gun】Specially used for polishing, painting and sanding various dead ends of light metals and small metals, rough edges and rusty details, as well as paint peeling, tiles, car surface treatment, glass etching, etc..
  • 【Foot Switches】1/4"NPT Pneumatic Foot Pedal Valve Kit 3 Way 2 Position Threaded Rubber Nonslip Pressure Control with 6mm Pneumatic Fittings..
  • 【Material 】Made of aluminum alloy, the foot pedal eliminates hand fatigue and adds more precise control over the flow of sandblasting media. The kit allows you to blast for longer periods of time without having to take breaks due to hand fatigue..
  • 【Support a variety of sandblasting media】. Suitable for (46-240#) purpose non-metal sandblasting media, baking soda or glass beads, sodium bicarbonate, silica, walnut, garnet, etc. Please make sure to use the correct abrasive for your project..
  • 【Package specifications】Sandblasting gun*1, ceramic nozzle*1, pneumatic foot valve*1. Tips. Please wear gloves and other protective equipment to ensure safe operation, and please do not point the sandblasting gun at people or animals..
Check Stock

Farm Jack | 48\ High Farmer Lift Tractor Off Road Truck SUV Bumper 3.5 Ton

  • Labor-Saving Jack: The pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.5"/ 140 mm. Maximum height: 15.75"/400 mm. It only takes 3-5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere..
  • Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The relief valve in the middle ensure the injected gas is not excessive to ensure the security of the use process..
  • Portable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk..
  • Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, min....
Check Stock

Bestauto Pneumatic Car Jack 6600lbs Heavy Duty Air Jack Lifting Height Up to 16 Inch

  • Labor-Saving Jack: The pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.5"/ 140 mm. Maximum height: 15.75"/400 mm. It only takes 3-5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
  • Heavy Duty Construction: Our pneumatic jack is a high-strength steel that makes the whole body sturdy and durable. Highly sealed airbags will not leak or be scratched. In addition, our wheels are better suitable for all-terrain, helping you maintain your car anytime, anywhere..
  • Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
  • when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The relief valve in the middle ensure the injected gas is not excessive to ensure the security of the use process..
  • Portable Handle: This airbag jack has a long handle, which makes the jack easy to move and use. And this handle can be disassembled from the middle, saving space and making it suitable for you to keep in your trunk..
  • Wide Application: The quick jack car lift is suitable for the situation where a single wheel needs to be lifted in soft terrain or muddy roads for family-used cars, min....
Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

  • Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
  • Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
  • Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
  • Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
  • Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check Stock

DERNORD Butterfly Valve with Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 Inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • The Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

Dual-Head Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 RPM Pneumatic Graver Handpiece Micro Engraer for Jewelry Crafts and Wrought Iron

  • 【Technical Parameter】Product type: Dual-head jewelry pneumatic engraving machine. Model: HH-G01, power supply: 110V 60HZ, adjustable speed: 400-8000 RPM, flexible pressure range: 0-4 KG..
  • 【Precise & Adjustable Gauge】The pneumatic engraver features 400-8000 strokes per minute, a throttle bias adjustment valve for tailoring throttle response.
  • 【Ergonomic Design】Advanced ergonomic designs are adopted as the front air pressure adjustment, quick connection air connector, and advanced valve pulse device, without noise or vibration..
  • 【Easy-to-operate Panel】Adopting user-friendly keyboard design & reasonable layout, easy to operate, intuitive & clear. The foot pedal is convenient for precise control..
  • 【Various Application】Pneumatic hand engraving machines are suitable for jewelry, crafts, wrought iron & other industries and can be regarded as a good helper for engravers..
Check Stock

DERNORD Butterfly Valve with Blue Trigger Handle Stainless Steel 304 Tri Clamp Clover (1.5 inch Tri Clamp Butterfly Valve)

  • Tube OD: 1-1/2 Inch, Ferrule Size: 50.5MM, Fits 1.5 Inch Tri-clamp.
  • DERNORD Trigger style handle butterfly valve - 13 Positions.
  • Temperature Rating (spec): 15°F thru 200°F.
  • Tri-Clamp butterfly valve Max Pressure 1.6MPA, 100 Percent pressure hydraulic tested for reliability.
  • The Trigger style handle allows you to set the valve in four different positions simply by pulling and turning.
Check Stock