Reviews Pneumatic Air Source Units

6 Way 8 Port Air Manifold, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Pneumatic Air Manifold Distribution Block, Industrial Aluminum Alloy Air Compressor Manifold

  • 【High Pressure Resistant & Better Sealing】 Acrux7 air distributor block has high pressure resistance and strong sealing. Air manifold for distributing pneumatic power to multiple locations from a single source..
  • 【Precision Air Distributor】Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Ports Diameter:11mm (0.4 in). Two G1/2" inlet ports and six G1/4" outlet ports.
  • 【Easy & Fast to Connect】The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • 【Industrial Aluminum Alloy】Manifold block is made of aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • 【Excellent Air Manifold】Air manifold is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

Viair 10000 Onboard Air System

  • 1-gallon air system kit designed to work with air horns and lockers.
  • Includes: Air tank, air compressor, omega bracket with mounting hardware, pressure switch (85 PSI on, 105 PSI off), 40-amp relay, 145 PSI safety....
  • 1-gallon air tank and 98C compressor combine for plenty of power.
  • For air horn use, air lockers, and a host of other light duty pneumatic needs.
  • Reliable air source in a smaller volume and a cost-effective package.
Check Stock

1/4\ NPT Water/Oil Trap Separator, Oil-Water Separator Air Tools System Air Pressure Filter Compressor Pneumatic Regulator Lubricator Moisture Drain Valve Water Trap (0-213psi)

  • ※ Adopting premium aluminum alloy and plastic, it is of highly stable performance and long durability.
  • ※ The lubricator can supply proportional lubricating oil to pneumatic equipment to prolong service time of the air tool.
  • ※ Differential pressure discharge design to achieve semi-auto discharge..
  • ※ Help to clean the air source, filter moisture in air and supply a relatively stable air source.
  • ※ Control air pressure at a wide range from 0.05 Mpa to 0.85Mpa.
Check Stock

Kyuionty 2 Way Pneumatic Manifold Air Distribution Block, Aluminum Alloy Air Compressor Manifold Distribution Block, G1\\/2 Supply Port, G1\\/4-Inch Output Port

  • High Quality Material: The air distribution block is made of premium aluminum alloy, which surface is processed by oxidation treatment, high hardness, corrosion resistance, stable and durable..
  • Dimensions: Total Size (L*W*H): 75 x 30 x 30 mm/ 2.95" x 1.18" x 1.18". Including two G1/2 inlet ports and two G1/4 outlet ports..
  • Good Performance: The manifold block is used to distribute pneumatic power to multiple locations from a single source. With good air tightness, not easy to leak air..
  • Wide Application: The pneumatic manifold block is used for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch. It is very practical..
  • 100% Satisfaction Guarantee: Our products are backed by quality customer service to ensure that your satisfaction is guaranteed. If for any reason you do not like our products, you can return them unconditionally within 90 days and get a full refund..
Check Stock

Arrow PT50 Oil-Free Pneumatic Staple Gun, Professional Heavy-Duty Stapler for Wood, Upholstery, Carpet, Wire Fencing, Fits 1/4”, 5/16”, 3/8", 1/2", 9/16” Staples , Red

  • READY FOR ACTION: The PT50 Pneumatic Staple Gun is great for household projects, like insulation, house wrap, roofing, flooring, or upholstery.
  • This tool is great for large projects and stapling into harder materials.
  • COMFORT AND EFFICIENCY: The lightweight compact design, over mold rubber grip, and the exhaust cover that allows you to direct exiting air flow make for a comfortable stapling experience.
  • CONVENIENCE AND SAFETY: Unlike other pneumatic tools, the PT50 does not require oil for maintenance.
  • The safety trigger feature requires two triggers to be pulled before firing to prevent misfires.
  • BUMP FIRE ACTION: Rapid firing of staples is possible by holding down the trigger and pressing against your work surface. The contact safety prevents misfires when shooting multiple staples in succession.
  • COMPATIBILITY: This staple gun comes with air inlet fittings and operates on home compressor units up to 100psi.
  • This tool uses Arrow T50 staples (sold separately) in 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch, or 9/16-Inch.
Check Stock

Generac Oil Filter 070185E 8 Pack Extended Life, Oil Filter is 30% Longer, 30% More Capacity

  • Uuniversal Generator Parts replacement for Generac Air Filter 0E9371A.
  • FITS ALL: 10, 12, 13, 15, 16, 17, 18, & 20kW air cooled Generac, Centurion, Siemens, & Eaton standby generators post 2008 FITS ALL: 10 - 17.5 KW Generac XP, XG, & Ultra Source series portable generators.
  • Oil Filter 0868539E Direct Replacement for Generac Oil Filter 070185E 90 Logo Orange Pre Box Extended Series 070185ES. 90mm.
  • 90mm Higher capacity filter and 30% more than the standard filter. Fits Generac, Guardian, Centurion, Watchdog, Dayton, Siemans & Carrier air-cooled standby units. Replaces 070185E, 070185B, 070185D, 070185F. Fits all Generac generator units up to 22 Kw..
  • Universal Generator Parts 490155T Spark Plugs Direct Replacement for Briggs & Stratton 496018T and Champion RC14Y..
Check Stock

Kids Farm Lifestyle Just A Boy Who Loves Tractors T-Shirt

  • ...hium-Ion Batteries & has the power/ability to haul loads at a Max 15° Upward Slope. A MAX Working Load Capacity of 500 lbs (230kgs) / Hauling Capacity of 1000 lbs (460kgs) & 6 cu.ft of Cubage to load. Speeds: Forward: 0-5km/h (3.1MPH) (Variable) / Reverse: 0-3.5km/h (2.2MPH) (Variable) & LARGE 13" Pneumatic Wheels.
  • POWERFUL and EFFICIENT POWER SOURCE - This Power Wagon can use (1 or 2) 2Ah/4Ah Li-Ion Rechargeable Batteries to provide 88.8Wh or 177.6Wh (watt hours) of use per battery. Li-Ionon technology provides: Fast charge times & versatile climate viability, high load power outputs, long cycle & shelf life, low internal/vibration resistance & good coulombic efficiency. Lithium-Ion batteries have a spill-proof safe design & are easily transportable via land, sea or air with minimal restrictions.
  • ECO-FRIENDLY, SAFE and PROPER USE - (Green and Safe) unlike gasoline powered devices, battery-powered units produce no smog & are quieter. Always operate the power cart with eye & hand protection, utilize the speed controls & shut off/starter switch as needed. Included is the All Purpose Modular Cargo Bed can be used as a flatb....
Check Stock

Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)

  • ...oncave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
  • General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
  • Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
  • Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
  • Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
  • Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
  • It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering....
Check Stock

3 Way Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/4-Inch Output Port, Aluminum Alloy

  • Air manifold for distributing pneumatic power to multiple locations from a single source..
  • Two G1/2" inlet ports and three G1/4" outlet ports..
  • High pressure resistance and strong sealing..
  • Efficient and stable performance, easy to install and sustainable..
  • It is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

Coilhose Pneumatics 3054 High Flow Manifold, 1/2-Inch FPT Supply Port, Five 1/4-Inch FPT Output Ports

  • Air manifold for distributing pneumatic power to multiple locations from a single source..
  • Two G1/2" inlet ports and three G1/4" outlet ports..
  • High pressure resistance and strong sealing..
  • Efficient and stable performance, easy to install and sustainable..
  • It is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

2 Way Pneumatic Manifold Air Distribution Block, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Aluminum Alloy

  • Air manifold for distributing pneumatic power to multiple locations from a single source..
  • Two G1/2" inlet ports and two G1/4" outlet ports..
  • High pressure resistance and strong sealing..
  • Efficient and stable performance, easy to install and sustainable..
  • It is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

3 Way Pneumatic Manifold Air Distribution Block, G1\\/2 Supply Port, G1\\/4-Inch Output Port, Aluminum Alloy

  • Air manifold for distributing pneumatic power to multiple locations from a single source..
  • Two G1/2" inlet ports and three G1/4" outlet ports..
  • High pressure resistance and strong sealing..
  • Efficient and stable performance, easy to install and sustainable..
  • It is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock

Jet Tools - AHJ-20, 20 Ton Air/Hydraulic Bottle Jack (456620)

  • INCREASED LIFTING SPEED: Labor saving air pump that connects to a pneumatic source for increased lifting speed.
  • RELIABLE: Electric welded bases and cylinders virtually eliminating leaks for proven reliability.
  • VERSATILE: High or low extreme temperature fluxuations do not affect jack performance increasing location versatility.
  • Upright, horizontal or angled operating positions increases versatility.
  • MULTIFUNCTIONAL: Lifting, pushing, spreading, bending, pressing or straightening capabilities for multi-function use.
  • SAFE: Complies with ANSI/ASME B30.1 and PALD-1 Standards.
Check Stock