Reviews Plumbing Sleeve Pullers

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ch effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Ma....
Check Stock

ebags CityLink Laptop Backpack Slim OLIVE

  • Padded laptop/tablet pocket (fits most 15.6").
  • Linear dimensions: 36.5", weight: 2.63 lbs.
  • Pass-through sleeve secures bag to rolling luggage.
  • Lockable zipper pullers (lock not included) to secure pockets and valuables on the go.
Check Stock

OGIO Flux 220 Liter Backpack, Navy

Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ... walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fast solve the problem of compression valves failing with small....
Check Stock

MAXPEDITION TT26 Backpack, Black, Large

  • Spacious main compartment with padded bottom and two-way access - top & front..
  • Rear interior sleeve fits 15” laptop or large tablet and assorted interior side wall mesh pockets.
  • Dual side pockets with adjustable bungee cord retention, dual front compression straps with side release buckles and dual access CCW compartment with security lockout strip.
  • Padded shoulder strap with quick release buckles, adjustable & removable sternum straps and removable 1.0” hip belt with side release buckle.
  • Zipper pullers with shrink wrapped webbing and plastic fobs including top zippered flap pocket.
Check Stock

MAXPEDITION TT26 Backpack Wolf Gray Large

  • Spacious main compartment with padded bottom and two-way access - top & front..
  • Rear interior sleeve fits 15” laptop or large tablet and assorted interior side wall mesh pockets.
  • Dual side pockets with adjustable bungee cord retention, dual front compression straps with side release buckles and dual access CCW compartment with....
  • Padded shoulder strap with quick release buckles, adjustable & removable sternum straps and removable 1.0” hip belt with side release buckle.
  • Zipper pullers with shrink wrapped webbing and plastic fobs including top zippered flap pocket.
Check Stock

GEARWRENCH 2 or 3 Jaw Internal/External Ratcheting Puller Set, 2 and 5 Ton - 3627

  • Ratcheting pullers have a time-saving, indexing jaw design.
  • Legs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a time to the pulley without help.
  • Pullers can also be converted to two- and three-leg pullers.
  • Jaws can be reversed from external to internal style in seconds.
  • Maximum spread of 3-1/4 inches on 2 ton puller.
  • Maximum spread of 5 inches on 5 ton puller.
  • Includes blow mold case for storage and organization.
Check Stock

It s About To Go Down Joke | Funny Plumber s Plunger T-Shirt

  • Are you a plumber, pipefitter or steamfitter that loves poop jokes? Unclog backed up toilets, pipes, drains and sewage systems in this plumbing work....
  • Novelty plumber humor tshirt is a fun birthday, christmas or fathers day gag gift for men, women, dad, pipefather, plumbing contractor, repairman or a....
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

Orion Motor Tech Rear Axle Bearing Puller Tool Set, Rear Axle Bearing Remover Set, Rear Axle Bearing Removal Tool Kit with 3 Sizes 1 to 1-7/8, 1-5/16 to 2-3/8, & 1-3/8 to 2-7/8

  • 3PC. BEARING PULLER SET: This 3-piece professional rear axle bearing removal tool set by Orion Motor Tech works with your 5/8" slide hammer to let you quickly and easily pop out worn or damaged semi-floating rear axle bearings.
  • CONVENIENT DESIGN: Laser-etched markings clearly identify each of the three pullers in their custom carry case, while their rotary connectors give you easier access in narrow spaces.
  • SCRATCH-FREE SERVICE: The washers on our bearing pullers distribute your tool's force evenly to provide sure grip and avoid the damage caused to bearings and casings by claw-type pullers.
  • WIDE APPLICATION: The small, medium, and large bearing pullers cover inner diameters from 1 to 1-7/8.
Check Stock

LASCO 13-2706 Compression Sleeve Puller Tool 4661, 1, SS

  • The Compression Sleeve Puller Effortlessly Pulls The Nut And Ferral Off Of The Pipe.
  • Removes 1/2-Inch Copper Water Compression Sleeve.
Check Stock

LASCO 13-2708 Compression Sleeve Puller for 1/2-Inch (5/8 OD) Copper Pipe

  • Compression Sleeve Puller pulls the nut and compression sleeve off of the copper pipes.
  • Saves time and effort when replacing old angle stops.
Check Stock

QIUJIN 54pcs Paintless Dent Repair Kit Car Dent Puller Tool with Adjustable Golden Lifter Bridge Puller Suction Cup & Glue Gun for Automobile Body Dent Removal Remover Tools Kit

  • EFFECTIVELY FIX DENTS: All dents can be easily removed with our innovative dent remover tool! It contains all tools needed to repair dents of various....
  • PROTECT YOUR CAR PAINT: This is paintless dent repair tools, we use rubber/sponge as base in our pullers, which are friendly to your car paint when....
  • HIGH QUALITY: Our heavy duty 100-watt glue gun provides quick heating action for more timely repairs. Unlike many other glue guns, ours has an on/off....
  • EASY OPERATION: Our car dent repair tools are suitable for both professional and green hands, easy use and can pull out dents easily. Our pullers pass....
  • WARRANTY: 30-day free return, 360-day quality guarantee for pullers. Please contact us if there is something missing or having any other problems, We....
Check Stock

OTC 1205 Universal Cylinder Sleeve Puller for Wet-Type Sleeves in Heavy-Duty Engines

  • This tool removes cylinder sleeves faster than ordinary pullers because it requires little setup time - cone adjustment positions puller jaws quickly....
  • To break 'frozen' sleeves loose, adjustable bridge is positioned on the cylinder block then bearing-mounted forcing nut is tightened.
  • Next, bridge is removed and slide hammer assembly is attached - with a few sharp hammer blows from the 5 lb. hammer, sleeve is pulled - an average of....
  • Does not require any special adapters to pull sleeves due to adjustable jaw design.
  • adjustable jaws allow use on cylinder sleeves ranging from 3....
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock