Reviews Plumbing Couplers
BronaGrand 10pcs Plastic Standard Couplers Pipe Tip Coupler Cake Decorating Couplers for Icing Nozzles,White
- 【STANDARD COUPLERS SIZE】:These white couplers length is 3 cm/ 1.2 inches, diameter is 2.5 cm/ 1 inch at the base.fit for standard-size icing....
- 【STURDY MATERIAL】:Cake decorating couplers are made of sturdy plastic,Non-toxic, tasteless, food-safe materials, durable and reusable..
- 【EASY TO USE】:Cut a tiny hole in the bag corner, insert the coupler, then attach the tip and screw on the ring, after done, remove the tip and....
- 【USABLE RANGE】:Standard coupler fits all decorating bags and standard tips, help you swap piping tips without unnecessarily wasting bags or....
- 【PACKAGE QUANTITY】:Included 10 pieces pipe tip couplers,enough for your different usages..
Check StockSharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF
- SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
- remove using a disconnect clip or disconnect tongs.
- VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
- large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
- EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
- can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
- SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check StockTeemico 24 Pack Plastic Standard Couplers Cake Decorating Coupler Pipe Tip Coupler for Icing Nozzles
- Standard couplers: these white couplers are 3 cm/ 1.2 inch long, and their base' diameters are 2.5 cm/ 1 inch, fit for standard-size icing nozzles.
- The standard coupler fits all decorating bags and standard-size tips, helps you change piping tips without unnecessarily wasting bags or frosting.
- Simple to use: cut a tiny hole in the bag corner, insert this plastic coupler, then attach the tip and screw on the ring, after done, remove the tip....
- Durable and practical: the pipe tip couplers are made of quality plastic, with sturdy construction, make you decorate cake and cookie conveniently and....
- Package includes cake decorating couplers, enough for different usages, you can change similar sized tubes without emptying the contents of the....
Check StockTAISHER 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket In Line Type Air Hose Splitter with 4 Couplers and 1\\/4 Male NPT Plug
- 4-Way air manifold and Splitter with 1/4-inch couplers.
- Durable and lightweight aluminum construction.
- High corrosion resistance for longer life and smoother operation than standard couplers.
- 1/4-inch body plug input with a 1/4-inch body industrial interchange couplers output.
- Industrial interchange compatible with industrial, "m", "D" and "I/m" style plugs and couplers.
Check StockShappy Plastic Standard Couplers Cake Decorating Coupler Pipe Tip Coupler for Icing Nozzles White 6 Pack
- Standard couplers: these white couplers are 3 cm/ 1.2 inch long, and their base' diameters are 2.5 cm/ 1 inch, fit for standard-size icing nozzles.
- Usable range: the standard coupler fits all decorating bags and standard-size tips, helps you change piping tips without unnecessarily wasting bags or....
- Simple to use: cut a tiny hole in the bag corner, insert this plastic coupler, then attach the tip and screw on the ring, after done, remove the tip....
- Durable and practical: the pipe tip couplers are made of quality plastic, with sturdy construction, make you decorate cake and cookie conveniently and....
- Quantity: 6 x cake decorating couplers, enough for different usages, you can change similar sized tubes without emptying the contents of the....
Check StockShappy Plastic Standard Couplers Cake Decorating Coupler Pipe Tip Coupler for Icing Nozzles, White (12 Pieces)
- Standard couplers: these white couplers are 3 cm/ 1.2 inch long, and their base' diameters are 2.5 cm/ 1 inch, fit for standard-size icing nozzles.
- Usable range: the standard coupler fits all decorating bags and standard-size tips, helps you change piping tips without unnecessarily wasting bags or frosting.
- Simple to use: cut a tiny hole in the bag corner, insert this plastic coupler, then attach the tip and screw on the ring, after done, remove the tip and coupler, wash them clean.
- Durable and practical: the pipe tip couplers are made of quality plastic, with sturdy construction, make you decorate cake and cookie conveniently and quickly.
- Quantity: 12 x cake decorating couplers, enough for different usages, you can change similar sized tubes without emptying the contents of the decorating bag.
Check Stock1/2\ Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers w Dust Caps,1/2\ NPT Thread+ 1/2 Body Hydraulic Couplers for Skid Steer Bobcat Case/Kubota/New Holland
- The flat face hydraulic couplers with 1/2" NPT thread+ 1/2 body. The hydraulic quick connect coupler is an ISO 16028 flat face style, fits all standard flow skid steers attachments. Impoved design high flow performance and maximum service life..
- The universal hydraulic quick disconnect coupler & plug interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota couplings which made to ISO 16028 standard.
- Applications:This flat face couplers connect used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,construction,industrial hydraulic lines..
- The flat face hydraulic quick connect couplers is valve design and structure for minimize pressure adrops and fluid losses. Sleeve locking mechanism prevents accidental disconnection..
- Our bobcat skid steer hydraulic couplers are made by heavy duty harden steel construction with zinc nickel plating for superior corrosion resistance. 5076 PSI Rating , 12-23 GPM Flow Rate. Warm Tips: Make sure relieve all pressure on the skid steer from the lines before connect/disconnect them.Just line up the flat faced hyd fittings and push couplers to gather,male to female, female to ma....
Check StockMaster Lock - 6 Trailer Locks Keyed Alike 6KA-37937-37
- In Stock with a delivery time of 1 to 5 business days. Total trailer security Keyed Alike - One key opens all six locks..
- Multiple 6KA trailer lock packages CAN be keyed alike. If you ordered a quanity of 2, 3 etc we would automatically key them all the same..
- Latch lock doesn't fit some 2-5/16" couplers. See description below for latch lock (#37) applications. For 2-5/16 couplers the better lock set is: Master Lock - 6 Trailer Locks Keyed Alike 6KA-37937-3.
- Each lock comes with two keys, for a total of twelve keys..
- Coupler lock fits 1-7/8", 2" & 2-5/16" couplers..
Check StockRobinair 18192 R-134A Manual Replacement Coupler Set
- ...es an integral safety sleeve which protects against injury and refrigerant loss if the coupler is disconnected under pressure.
- Compact design easily fits into tight quarters.
- The 6-ball coupler design provides a more stable grip on the fitting than lesser 4-ball designs.
- Set includes 1ea. low-side and high-side manual couplers.
- Robinair 18192 R-134A Manual Replacement Couples Set.
- Robinair Manual Replacement Couples Set Field service connect to the special Enviro-Guard hoses to allow access to service ports on automotive R-134a A/C systems. The quick-connect design has an integral safety sleeve, which protects against injury and refrigerant loss if the coupler is disconnected under pressure. The compact design easily fits into tight quarters, which is especially handy for retrofits. Six-ball couplers provide a more stable grip on the fitting than do couplers with four balls. Set includes a low and high manual coupler..
- Quick-connect design has an integral safety sleeve which protects against injury and refrigerant loss if the coupler is disconnected under pressure.
- Six-ball couplers provide a more stable grip on the fitting.
Check StockFreeman PS3WAM 3-Way 1/4' Universal Steel Air Manifold with Quick Connect Couplers
- Split 1 air line into 3 lines to efficiently power multiple pneumatic tools at the same time.
- Durable steel construction with a lightweight flat hex aluminum alloy block.
- Inlet connects to 1/4" industrial couplers.
- Outlets connect to 1/4" NPT industrial, automotive, and ARO plugs.
- Universal quick connect couplers make it fast and easy to connect and disconnect.
- Sleeve guards on the couplers reduce accidental disconnects and prevent damage to the coupler.
Check Stock1/4-Inch Brass Female Industrial Coupler, 10 Pack 1/4 Inch Air Hose Fittings NPT Female Quick Connector Air Coupler for Professional Jobsites, Automotive Shops and Home
- 【Package Dimension】- This package includes 10 pack 1/4 inch brass female industrial couplers, each coupler are 1/4 inch NPT female thread × 1/4 inch body size, their maximum working pressure is 300 psi..
- 【Premium Materials】- Quick connector air couplers are made of high quality brass, they are high strength, high hardness and durable for long term use..
- 【Connector Type】- 1/4-inch brass female industrial couplers are used for industrial/M-style interchange, they also adapts to all industrial/M-style plugs/nipples..
- 【Coupler Sleeve】- A better grip when connecting and disconnecting, sleeve guard helps reduce the risk of accidental disconnects and protects the coupler sleeve..
- 【Wide Application】- 1/4-inch brass female industrial couplers are ideal for professional jobsites, in automotive shops or at home in the garage for air hose, air compressor, air tools, air nailer, air blow gun, pressure washer..
Check StockMaster Lock - (4) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-4
- ATTENTION: If you order two 4-packs they will NOT necessarily be keyed the same. To ensure you get two 4-packs keyed alike, you must order the 8-pack..
- APPLICATION: Ideal for outdoor applications when needing many locks that utilize ONLY one key. The 37 lock works on 1-7/8 & 2 inch couplers & on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. TO FIT COUPLER LATCH: Remove the shackle sleeve. Shackle fits standard opening of 9/32" (7mm). Note that non-rigid shackle has enough play to fit virtually all coupler latches less than 7/8 wide..
- IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
- SPECIFICATIONS: 3/4" (19mm) Armored Shackle Guard helps block bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing..
Check Stock1/2\ Ag Hydraulic Quick Connect Tractor Couplers with Dust Caps,Poppet Pioneer Style ISO 5675 Hydraulic Quick Coupler
- 2 sets Ag hydraulic quick connect tractor couplers,easy to connect and disconnect,with hydraulic coupler dust caps.
- Body Size: 1/2″ Body,Thread Size: 1/2″ NPT Thread, Poppet Valve.
- The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal and ISO 7241.
- Most common quick connect couplers used in the agriculture, construction and logging industries.
- Made by harden steel construction for superior corrosion resistance.
Check Stock