Reviews Plug in Meter

SKYRC iMAX B6 Mini Professional Balance Charger / Discharger for RC Lipo Battery Charging

  • Lithium Battery Meter: Plug your LiPo/LiIon/ LiFe balance plug into the charger and use the battery meter as a voltage tester to quickly see the voltage readings from each cell..
  • Internal Resistance Meter: Use this function to measure the resistance in each of your lithium battery's cells. This helps determine the health of your cells, to be sure you are getting the most power out of them..
  • This charger and the battery should be put on a heat-resistant, noninflammable and nonconductive surface. Never place them on a car seat, carpet or similar. Keep all the inflammable volatile materials away from operating area..
  • Genuine, Authentic, Original iMax B6 Mini Charger by SkyRC w/ Anti-Fake Holographic Serial Number on the back of the charger. This number can be inputted into SkyRC's website to prove its authenticity..
  • Package Contains: 1x SKYRC B6 mini Charger.
  • 1x T Plug with Banana connector Charging Cable.
  • 1x DC Cable with Alligator Clip Charging Connector.
  • 1x T Plug with Alligator Clip connector Charging Cable.
  • 1x T Plug with Futaba connector Charging Cable.
  • 1x T Plug with JST connector Charging Cable.
  • 1x T Plug with XT60 connector Charging Cable.
Check Stock

Plug-in Kilowatt Electricity Usage Monitor Electrical Power Consumption Watt Meter Tester

  • 【Electricity Usage Monitor, Extension Cord】you can virtually monitor standby or working power dissipation of all your electronics. Monitor which appliances are the high cost of energy. save energy, money, Reduce CO₂emissions, environmental friendly,etc.electrical usage monitor.
  • 【Upgrade Blue Backlit LCD Display】The digital large backlit LCD display screen is 180° full wide view clear visible, make you easy to read and record the data, especially in the darkness.power consumption meter.
  • 【Overload Protection】 When the whole power exceeds the rated power 1650W of monitor, LCD will display.watt plug meter.
  • 【Various Parameters Measurement】CO₂ Emissions(CO₂/KG), Power(W), Energy (KWh), Voltage/Hertz, Amps/Hertz, Power Factor, Minimum power and Maximum power, 8 modes for your choice.kilowatt meter.
  • 【Data Hold Function】Electricity Usage Monitor will save the last datas when you remove the appliance from power meter or remove the power meter from the socket.
  • If you're not satisfied with it, please feel free to contact, We take full responsibility for product quality.plug in amp meter.
Check Stock

KAKOOTI Multimeter Test Leads Kit，2PCS Test Probes 1000V 20A 4PCS Silicone Alligator Clips Test, Multimeter Alligator Clips Set for Fluke/AstroAI/INNOVA/KAIWEETS Digital multimeter Clamp Meter

  • ✅【 Excellent Quality 】 This probe test lead cable is universally suitable for most of digital multimeter voltmeter.Multimeter test leads with banana plug are all made of high quality pure copper material, strong conductivity, low resistance and no signal loss. Leads: CAT II 1000V 20A..
  • ✅【Universal And Compatible】Multimeter leads probe cable clips multi plug tool kit. Multimeter Test Leads Probes and aligator electric clip makes electrical work easier and more precise. The Perfect test tool for precision testing devices. Perfectly fits all kinds of multimeters like digital clamp meters, digital multimeters, volt meter，ohm meter, electrical meter，bench power supply，multi meter electric tester，megger test leads，amp meter，esr meter，multimeter tester.
  • ✅【Sturdy & Heavy Duty】This crocodile clip is rust-proof, corrosion-resistant, oxidation-resistant, compact and durable.Silicon rubber material, double insulation, Each crocodile clip overall jaw perfect solid bite, they are clamping tight, long-term use without deformation.
  • ✅【Conductivity] 】The test lead set has excellent tensile strength and bending strength, as well as low strength and excellent electrical conductivity. It is very useful for electricians and maintenance p....
Check Stock

Milwaukee 2235-20 400 Amp Clamp Meter

  • 400A MAX AC/DC CURRENT RANGE: Reads both AC and DC current. With 9 functions it’s the perfect meter for the professional electrician.
  • MORE ACCURATE: Equipped with true RMS accuracy this clamp meter won’t leave you guessing weather your readings are correct.
  • HIGH SAFETY RATING: Feel safe on the job knowing Southwire’s clamp meter is CAT III 600V safety rated.
  • BUILT-IN NON-CONTACT VOLTAGE DETECTOR: Helps identify where live voltage may be present before working on electrical installations or troubleshooting.
  • CONVENIENT THIRD-HAND TEST PROBE HOLDER: The clip on the back of the clamp meter allows you to hold a test lead in one hand and the meter and the other test lead in your other hand making the testing process easier.
  • BUILT IN WORK LIGHT: The built-in work light is an extra convenience feature that allows visibility even in dimly lit areas.
  • WHAT’S INCLUDED: Carrying case, clamp meter, test leads, type K temperature probe with banana plug adapter, AAA batteries and instruction manual.
Check Stock

Shure PS43US In-Line Power Supply for GLX4 & ULX4 Wireless Receivers

  • Rated input: 100 - 240 VAC, 50-60 Hz, 250 mA maximum.
  • Output cable: 72 inches (1.8 meter) long.
Check Stock

LaMotte N-P-K Soil Test Kit

  • 【3-IN-1 MULTFUNCTION】: The Soil Moisture Meter has the functions of soil moisture, pH, and sunlight intensity. The plant moisture meter can accurately grasp the time and amount of water needed to water the plants, and help you plant your favorite flowers and plants. (This soil tester CAN ONLY be used in soil, it CANNOT be used to test any liquids).
  • 【NEWLY UPGRADED LIGHT AREA & Probe】：The soil moisture meter is newly upgraded. The light-sensing area is larger and more sensitive than before. The upgraded version of the moisture meter probe is more durable and not easy to fall off. It allows your plants to photosynthesize better and grow healthily. The best soil moisture meter as Halloween gifts for family and friends..
  • 【EASY TO USE】:This soil ph meter uses dual needle detection technology to quickly and accurately detect soil moisture, pH, and light conditions. Just insert the sensor probe into the soil about 2-4 inches, and flip the switch to test the water, pH, and sunlight you want to measure. No batteries or electricity needed, plug and read..
  • 【WIDELY APPLICABLE】: This moisture meter is suitable for indoor and outdoor use. The design is light and portable, and it is easy to carry and use outdoors. The soil ph meter is an ideal soil t....
Check Stock

Southwire CLAMP Meter MAINTPRO 23030T

  • PROFESSIONAL DEVICE: The Southwire MaintenancePRO 23030T clamp meter is a rugged high end AC and AC/DC 1000A clamp meter for the serious electrician..
  • FUNCTIONALITY: The MaintenancePRO 23030T Clamp meter has 10 Measuring functions along with a powerful LED work light..
  • ENHANCED FEATURES: Added features like an easy to read 6,000 count backlit display and a built in non-contact AC voltage detector makes the 23030T the....
  • SAFETY AND INDUSTRY APPROVAL: With a UL listed safety rating of CAT IV 600V/CAT III 1000V, these clamp meters are built to get the tough jobs done..
  • WHAT’S IN THE BOX: MaintenancePRO 23030T Clamp meter, Test leads, Type K temperature probe with banana plug adapter, Carrying case and a 9 volt....
Check Stock

MASTECH MS8229 Digital Temperature Humidity Lux Sound Meter Multimeter

  • DMM + Lux Meter + Humidity Meter + Sound Level Meter + Thermometer.
  • 20%-95% RH 40-100 dB 40000 LUX -4-1832F 0-200 KHz 0-100 uF.
  • LED / Sound Warning shows you where to plug the test leads.
  • Built-in Temperature & Humidity Sensors show you the environmental temperature and humidity.
Check Stock

Southwire - 65031640 CLAMP METER, 400A AC/DC 21530T,Black/Brown

  • 400A MAX AC CURRENT RANGE: Reads AC current. With 8 functions it’s the perfect meter for the beginner or professional electrician.
  • MORE ACCURATE: Equipped with true RMS accuracy this clamp meter won’t leave you guessing weather your readings are correct.
  • HIGH SAFETY RATING: Feel safe on the job knowing Southwire’s clamp meter is CAT III 600V safety rated.
  • MIN/MAX: Allows you to capture and display a MAXIMUM or MINIMUM reading such as when conducting a load test on a car battery.
  • BUILT-IN NON-CONTACT VOLTAGE DETECTOR: Helps identify where live AC voltage may be present before working on electrical installations or troubleshooting.
  • CONVENIENT THIRD-HAND TEST PROBE HOLDER: The clip on the back of the clamp meter allows you to hold a test lead in one hand and the meter and the other test lead in your other hand making the testing process easier.
  • BUILT IN WORK LIGHT: The built-in work light is an extra convenience feature that allows visibility even in dimly lit areas.
  • WHAT’S INCLUDED: Carrying case, clamp meter, test leads, type K temperature probe with banana plug adapter, AAA batteries and instruction manual.
Check Stock

Sunbeam 1639-099-500 220 Volt Hair Dryer - Not for USA/Canada with European Plug

  • SUNBEAM 1639-099-500 220 Volt Hair Dryer - Not for USA/Canada with European Plug.
  • Powerful 1600 to 1800-wattage range 2 air speed and 3 heat settings, plus Cool Shot button Euro-compliant commercial plug.
  • Convenient 3-meter extended cord/ 0.6-meter coiled cord Ionic technology Black and silver attractive, upscale design Contoured handle with soft-touch finish Hinged lint screen.
  • Rotatable concentrator Low 83 air flow decibel ratio and quiet motor 220-240 Volt - To use Outside USA / Canada - Comes with EU Plug.
Check Stock

Mastech MS8229 Auto-Range 5-in-1 Multi-Functional Digital Multimeter

  • Dmm + Lux meter + humidity meter + sound level meter + thermometer.
  • 20%-95% RH 40-100 dB 40000 Lux -4-1832f 0-200 kHz 0-100 UF.
  • LED/sound warning shows you where to plug the test leads.
  • Built-in temperature & humidity sensors show you the environmental temperature and humidity.
Check Stock

Gazoz Performance 5 in 1 Digital Meter Gauge - Smart OBD2 Device - Boost, EGT, Voltage, Intake, and Water Temperature. PNP Meter Lite for BMW Mini Cars.

  • FIVE IN ONE OBD2 GAUGES: Looking for a sleek, simple way to monitor your BMW Mini's condition and performance? Look no further than the Gazoz Performance Digital Meter Gauge! This handy device plugs into your car's OBD2 port and is ready to go in just seconds. It'll give you 5 readings at a time: boost, intake temperature, exhaust gas temperature, volt, and water temperature..
  • SMART OBD2 GAUGE: This Digital Car Meter provides you with 5 real-time statistics in one easy-to-read device. The device has 5 modes, Boost Mode, Exhaust Temperature Mode, Intake Temp. Mode, Water Temp. Mode, Volt Mode. Simply plug the OBD2 device into your car and get the information you need instantly..
  • PLUG AND PLAY INSTALLATION: The Smart OBD gauge plugs into your car's OBD2 port and gives you immediate, easy-to-understand readings. It provides a Live Data Stream that can help you accurately identify the cause of your CHECK ENGINE LIGHT with a simple glance. When it comes time for maintenance or troubleshooting, simply plug in the device and instantly get the information you need..
  • SLEEK AND STYLISH: Our LED OBD2 Meter for BMW Minis is designed to be a sleek addition to your center console. Our Digital Gauge Meter is not only made with high-quality materials but also seamlessl....
Check Stock

Mastech MS2108 True-RMS AC/DC Clamp Meter with Inrush Current Measurement

  • Dmm + Lux meter + humidity meter + sound level meter + thermometer.
  • 20%-95% RH 40-100 dB 40000 Lux -4-1832f 0-200 kHz 0-100 UF.
  • LED/sound warning shows you where to plug the test leads.
  • Built-in temperature & humidity sensors show you the environmental temperature and humidity.
Check Stock