Reviews Pll Input output Impedance

Livewire SPDI Passive Direct Box with Attenuation Pad

  • Livewire SPDI Passive Direct Box with Attenuation Pad.
  • The SPDI passive direct box from Live Wire Solutions features a 1/4" high impedance instrument input and output plus balanced and floating low-impedance XLR output that ignores +48V phantom power..
  • Variable attenuation provides maximum input flexibility, while Lift mode severs ground connection between the input and the XLR output..
  • GND mode leaves ground connection intact between input and XLR output..
  • 1/4" high impedance input and throughput Balanced XLR output.
Check Stock

AUNE X1s GT DAC with Headphone AMP, PLL Technology Desktop HiFi Decoder

  • PLL (Phase Locked Loop) Technology: The X1s GT uses a high-performance PLL chip of ADI. The jitter is very low. It took half a year to finish the whole program design. The PLL core outputs low-jitter clock signals according to the music currently being played simultaneously to XMOS and DAC. Therefore, the digital signals are better..
  • Clock synchronization and External clock input technology: The X1s GT supports 10M external clock input. And it achieves clock synchronization of the whole device. The clock signals from PLL are synchronized by XMOS and ES9038Q2M. The DAC is working in the synchronized mode. PLL works in all digital input modes: USB, coaxial, optical..
  • Complex Fully-discrete Headphone AMPs: The X1s GT’s amp board has 4 fully-discrete headphone amplifiers. 277 parts and components in total, among which, 96 are BJTs. It uses ±9v power supply. It’s a “huge” amp board compared to those of the same level DACs with amps. The hardware performance is outstanding..
  • Unique Filter Modes: Instead of using the ES9038 series’ default filter modes, we designed 4 filter modes for the X1s GT with our own algorithm. The X1s GT was designed to be a special product. It must have its characteristics and they show our understanding of music..
Check Stock

Audiopipe Multi-Audio Amplifier 3 RCA outputs w/bulit in 10V line driver

  • This unit accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer.
  • Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.
  • Harmonics Distortion: 0.009% Frequency Response: 20-2000Hz Output Gain: 12 dB.
  • Output Level (10KHz): > 1V(1KHz Output Impedance: 1 KOhms Channel Resolution: > 60dB.
  • Input Impedance: 47 KOhoms Input Sensitivity: 260mV S/N Ratio: > 95dB.
Check Stock

Rockville BLUAMP 150 Home Stereo Bluetooth Amplifier Receiver Optical/Phono/RCA

  • ...in Cooling Fan. Built-in Pre-Amplifier with low distortion. Class D circuit with great sound quality. Solid metal construction with brushed aluminum front panel. Multi function volume knob . LCD Display / Touch Buttons. Frequency Response (±3dB): 50 Hz- 20 KHz..
  • AUX Input Impedance: 10k Ohms. AUX Input Sensitivity: 300mV. Phono input impedance: 47K. Phono input sensitivity: 20mV. Output Impedance: 4-8 ohm. Total Harmonic Distortion(THD): ≤0.5%. Signal-to-Noise Ratio(S/N): ≥78dBA. USB: Supports WAV/MP3/WMA. 110-220V.
Check Stock

ZeeVee ZvPro820 HD Video Distribution QAM Modulator Over Coax 1080p

  • 【For CATV】: Fine workmanship, with cost effectiveness for your own local CATV system..
  • 【Input&Output】: VHF working frequency for PLL controlled, HD input, A/V output, RF output..
  • 【Plug And Play】: Support NTSC and PAL TV format output, no need to install driver program, portable, flexible, plug and play..
  • 【ABS Shell】: Made of high quality ABS material, sturdy, durable and long service life..
  • 【Long Service Life】: Professional manufacturing, stable characteristics and high reliability..
Check Stock

Rockville BLUAMP 90 Home Stereo Bluetooth Receiver Amp w/Mic+Phono+HDMI Input

  • ...of RCA Audio Outputs to connect to a subwoofer or another amplifier. Bass/Treble/Mic and Master Volume controls. Binding post speaker output terminals (2 pairs). Built-in Pre-Amplifier with low distortion. LCD Display ..
  • Frequency Response (±3dB): 22 Hz- 20 KHz. AUX Input Impedance: 10k Ohms. AUX Input Sensitivity: 300mV. Phono input impedance: 47K. Phono input sensitivity:20mV. Output Impedance: 4-8ohm. Total Harmonic Distortion(THD): ≤0.5%. Signal-to-Noise Ratio(S/N): ≥78dBA. Bluetooth Version: 5.0. USB : Supports WAV/MP3/WMA. 110-240V.
Check Stock

rolls PM55P Personal Monitor Amp Battery Opt

  • Built in switchable Optical Limiter XLR Mic In & Pass Through Ground lift on XLR signal Stereo/Mono 1/4-in Monitor Input.
  • 3 5mm & 1/4-in Headphone outputs Powered by one 9 volt battery or the included PS27s power supply Lots of output level it's loud Belt clip is included.
  • Max Input Level -20 dB XLR 40 dB monitor Input Impedance 600 Ohm Mic - 22k Ohm Monitor Output Impedance 10 Ohms Gain 20 dB 1/4-in 50 dB XLR. Bandwidth: 50 - 20 kHz (kiloHertz).
  • S/N Ratio 90 db Limit Threshold 0 db Current Draw 70 Mils Nominal Max Output Level 100 Mil Watts @ 16 Ohm Power 9 - 15 VDC.
Check Stock

Blaupunkt EP1200X Digital Bass Enhancer Bass Note Restorer

  • Maximum Input Level:15V RMS / Maximum Output Level:13.5V peak.
  • Input Impedance: 10K Ohms/ Output Impedance: 150 Ohms.
Check Stock

WenkeDigi IR Infrared Over HDMI Remote Control Repeater kit Work with A/V equipments Out of Sight Like TV DVD Sky Set-top Box air Conditioner Including CEC HDMI adapters

  • Technical Information-Impedance-470 Ohm: Interfaces/Ports-Ports-1 x Output, 4 x Input:.
  • Connects 4 emitter ports and power supply to all Xantech IR receivers and keypads.
  • 4 parallel emitter ports with 470W resistors drive 4 single or 4 dual emitters quick-connect stereo mini jack for Xantech infrared receivers that use....
Check Stock

JBL Commercial 70v Amp+12 White 5\ Ceiling Speakers for Restaurant/Bar/Cafe

  • ... (12) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers 4 Restaurant/Office. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): 003c0.5%. Signal-to-Noise Ratio: 003e 76 dB.
  • Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz.
  • Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs. 70V Power Options: 5w (White). 2.5w (Green). 1.25w (Red). Features:.
  • (12) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 5 Watts, 2.5 ....
Check Stock

JBL Commercial 70v Amp+(8) White 5\ Ceiling Speakers for Restaurant/Bar/Cafe

  • .... (8) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers 4 Restaurant/Office. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): 003c0.5%. Signal-to-Noise Ratio: 003e 76 dB.
  • Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz.
  • Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs. 70V Power Options: 5w (White). 2.5w (Green). 1.25w (Red). Features:.
  • (8) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 5 Watts, 2.5 w....
Check Stock

Sony PCMD100 Portable High Resolution Audio/Voice Recorder,Black

  • Offers solid state storage, Built-in electret condenser microphones.
  • Native recording including DSD, WAV and MP3.
  • Simple uploading to computer, Supports USB 2.0.
  • "Built-in Mic: Electret condenser microphones. Max input level: 128 dB SPL. Frequency response 20 Hz to 20 kHz.
  • Mic Input (Stereo Mini Jack): Input impedance: 22 k ohm, Rated input level: 2.5 mV.
Check Stock

Audio2000'S AWR6305U5 Wireless Receiver for in-Ear Monitoring System

  • Audio output: line level x 2, XLR audio input: 1/4" phone jacks X2.
  • Headphone output: 1/4" stereo phone jack with adjustable volumeEar-buds included.
Check Stock