Reviews Plastic Threaded Fittings

(60 pcs) M8-1.0, DIN 908, Metric, Pipe Plugs, Hex Socket Drive, Straight Thread, Steel, Plain

  • Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
  • Also known as Threaded Pipe Fittings or Threaded Screw Plugs..
  • An internal hex socket drive is also known as an Allen drive..
Check Stock

EilxMag DOT Brass Air Line Quick Connect Fittings, PBT Push-To-Connect-Fittings NPT Male Thread & Brass Air Brake Line Fittings Kit (Pack of 44)

  • ...pair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Quick disconnect simply push tubing in, no tools or loose parts to handle in tight places. Save your effort and time. And pieces that contain a threaded end already have sealant pre applied to provide a secure connection..
  • 【After Service】: If you are not satisfied with our Air Line Fittings Assortment, please feel free to contact us, as we will offer you a replacement or 100% money back. What we desire is to bring you the best shopping experience..
Check Stock

Ebb and Flow Hydroponics Control System Parts, Extra Riser, 10 Pack, Flood and Drain Irrigation Kit, Tools and Fittings, 388500

  • EBB AND FLOW EXTRA RISER– Ebb and Flow Extra Riser Fittings, an essential part of your hydroponics supplies. Use as repair, replacement, or spare parts for your irrigation system..
  • INCLUDES – Extra Riser, 10 Pack. Threaded hydroponic watering system parts..
  • FOR IRRIGATION SYSTEMS – Ideal for use with reservoir and flood table irrigation setups for maximum functionality and efficiency. (Additional fittings may also be purchased separately)..
  • DURABLE – Automatic irrigation equipment parts made from heavy-duty and durable plastic that’s designed to last longer than other fittings and offer great value for money..
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • ...shops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks disconnect simply push tubing in, no tools or loose parts to handle in tight places. Save your effort and time. And pieces that contain a threaded end already have sealant pre applied to provide a secure connection..
  • 【After Service】: If you are not satisfied with our Air Line Fitting Assortment Kit, please feel free to contact us, as we will offer you a replacement or 100% money back. What we desire is to bring you the best shopping experience..
Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

  • Chill your wort like the professionals do!.
  • A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
  • Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
  • Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
  • Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • ...T-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock

Ebb and Flow Hydroponics Control System Parts, Screen, 10 Pack, Flood and Drain Irrigation Kit, Tools and Fittings, 388505

  • EBB AND FLOW SCREEN– Ebb and Flow Screen Fittings, an essential part of your hydroponics supplies. Use as repair, replacement, or spare parts for your irrigation system..
  • INCLUDES – Screen Ebb and Flow Fitting, 10 Pack. Threaded hydroponic watering system parts..
  • FOR IRRIGATION SYSTEMS – Ideal for use with reservoir and flood table irrigation setups for maximum functionality and efficiency. (Additional fittings may also be purchased separately)..
  • DURABLE – Automatic irrigation equipment parts made from heavy-duty and durable plastic that’s designed to last longer than other fittings and offer great value for money..
  • DELIVERS OXYGEN TO ROOTS – With higher oxygen levels in the root zone you will see improved growth from your plants and increased nutrient uptake, allowing you to maximize your yields..
Check Stock

Class A Customs | UM-1500 | One (1) UnderMount 15 Gallon RV Fresh and Gray Water Holding Tank RV Concession

  • 15 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - NSF CSA Approved - Fresh & Drinking Water Safe - BPA FREE.
  • WATER TANK MEASUREMENTS: 36 Longest Length (not including fittings) x 8.5 height x 13 width Average thickness 7/32 +/- (+/- .25" on each measurement) Designed to fit between the cross members of trailers.
  • TANK BUILT-IN FITTINGS: 2 (Two) 1 " Dia screw in balloon fittings (threaded female - NPT Standard) fitting will be closed, to use remove inner membrane with razor knife 2 (Two) " Dia screw in fittings (threaded female - NPT Standard).
  • NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish..
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Ebb and Flow Hydroponics Control System Parts, 3/4'' Fill Drain, 10 Pack, Flood and Drain Irrigation Kit, Tools and Fittings, 388075

  • EBB AND FLOW FILL DRAIN – Ebb and Flow Drain Fittings, an essential part of your hydroponics supplies. Use as repair, replacement, or spare parts for your irrigation system..
  • INCLUDES – 3/4'' Fill Drain, 10 Pack. Threaded hydroponic watering system parts..
  • FOR IRRIGATION SYSTEMS – Ideal for use with reservoir and flood table irrigation setups for maximum functionality and efficiency. (Additional fittings may also be purchased separately)..
  • DURABLE – Automatic irrigation equipment parts made from heavy-duty and durable plastic that’s designed to last longer than other fittings and offer great value for money..
  • DELIVERS OXYGEN TO ROOTS – With higher oxygen levels in the root zone you will see improved growth from your plants and increased nutrient uptake, allowing you to maximize your yields..
Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

  • 1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
  • 2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
  • 3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
  • 4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
  • 5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..
Check Stock

2 Pieces PVC Bulkhead Fitting for Rain Barrels, Aquariums, Water Tanks (3/4 Inch)

  • Function: locking nut is reversed threaded.
  • The Bulkhead Fitting with 4 mm thick silicon seal gasket that will contour to the shape of the round barrels.
  • Size: 47 mm x 58 mm, 3/4 inch, Material: PVC, Color: gray.
  • Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
  • Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Easy to install: one and done installation, threaded from the front end, commercial and industrial use.
  • You will get: 2 pieces PVC bulkhead fitting in your package, sufficient to use them on your water tanks and you can share them with your family and friends, they are good tools.
Check Stock

Class A Customs | T-7500 | 75 Gallon Fresh Water Holding Tank

  • ...view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process..
Check Stock