Reviews Plastic Sheet Extruding

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

Oster Beef Jerky Kit White FPSTDHAC01

  • Includes three extruding tips for different size jerky strips.
  • Includes 5 beef jerky seasoning and cure packets.
Check Stock

Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/ Ender 3 V2

  • Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance..
Check Stock

Wuivend Riet

  • ★ Cleaning swab:cotton, metal,Approx. 36 cm/ 14.2 inch Easy to reach the length of the flute body and clean the inside tube,Lightweight, portable, convenient and easy to store and hang.
  • plastic stick:to better keep flute dry and clean,Cleaning Rod Approx 34.5 cm/ 13.6 inch..
  • ★ Double dust brush:Approx. 17.5 cm/ 6.8 inches Made of plastic and nylon, Give your instrument a complete cleaning,Durable and safe.
  • Premium slide grease:brings quality to your musical instrument tuning slide maintenance. Easy to use without breaking down as the instrument warms up..
  • ★ Screwdriver length is 8.5cm/ 3.3inch,make you more convenient and tidy when cleaning and repairing flutes,Supplied with 1 Pair Cotton Gloves and 2Pcs Cleaning Cloth(7.8*7.8inch)..
  • ★ Package includes: 1 Pcs Flute Cotton Cleaning Brush Swab, 1 Pcs Dust Brush,1 Pcs Cleaning Rod,1 Pieces Screwdriver for Flute Repair and Cleaning,1 Slide Grease,1 Pair Cotton Gloves and 2Pcs Cleaning Cloth..
  • ★ Note: because the material is soft, maybe extruding during transportation and look like not so fluffy. But it can be restored by hand or by washing and drying..
Check Stock

LIVTE Clay Extruder Polymer Clay Cutters Kit - Clay Alloy Rotary Extruder with 20 Molds Discs & 40 Clay Circle Cutters Set for DIY Clay Pottery Crafting

  • 【WHAT YOU GET】In the package you can get 2 pcs of extruders, 20 pcs stainless steel of kinds of patterns and 40 pcs polymer clay circle cutters....
  • 【EASY TO USE】The clay press tool has a design of T-handle which can save your strength when you are extruding the clay. For clay extruding, what....
  • 【SPECIAL DESIGN】The fondant extruders have been designed with a seal ring. With the seal ring can the connection between rubber ring and gun....
  • 【WIDE APPLICATION】 Including 20 unique design stainless steel discs, the extruder kits can be widely used as an ideal helper for artist, baker,....
Check Stock

Toggle Switch, 6 Pcs Round Rocker Switch, 12 Volt ON/Off Switch with Pre-Wired 6A/250V 10A/125V AC, 12VDC Mini Electrical Switches for Boat, Car etc, KCD1-X-Y

  • Package: 6 Black Push Button Switch with Pre-Wired,Color: Black.
  • Terminal: 2Pin, soldered with 2 wires,Easy to install,Cost savings.
  • Pre-wired Design: The rocker switch is pre-wired with 65mm cable. The connector is covered by rubber and not easy to fall off,Cable length & diameter:10cm/2.94" & 20mm/0.08".
  • Voltage & Current:AC 6A/250V 10A/125V Switching Life: 20000-40000 times,.
  • Snap-In Design: Snap in Design make the switch easy to install. Extruding the plastic part, then Push in to the Panel.
  • Material: plastic and metal,Every switch has passed the qualified test. If you have any quality problems, please contact us and we will provide you with satisfactory after-sales service..
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • ... control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button..
  • MECHANICAL STRUCTURE: Clamping unit of extrusion blower moulding machine is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision..
Check Stock

XLNT TECH Engraving Blank Materials ABS Double Color Plastic Sheet, Red/White (7\ x 11\ x .040\

  • 【Product description】 ABS double color engraving plastic sheet are divided into three categories: ordinary double color engraving plastic sheet, outdoor double color engraving plastic sheet, and laser-specific double color engraving plastic sheet. This product is an ordinary double color engraving plastic sheet, which is mainly used Personal Identification.
  • Interior Signage Advertisement & Decoration..
  • 【Actual size】 8"x12" (19cmx29cm) Thickness: 0.5"~0.6" (1.3mm~1.5mm) Engraving depth: ≤0.023" (0.3 mm).
  • 【Package&Durable Shipping】 12 pieces & 1 colors of ABS double color sheet: Red/White. A transparent plastic film is attached to each board to prevent it from being scratched during transportation.There is bubble film or pearl cotton protection inside, and carton packaging outside..
  • 【Tools used】 Shear, Saw, Drill, Die-cut, Hot Stamp, Bend, Bond. It is not 100% used for laser engraving, depending on whether the worker has rich experience. Novice operators are not recommended to buy this product, you can search for our laser special ABS double color sheet.
  • 【Customer Service】 We have carefully checked every product sent to customers, but we do not rule out that there are still defective products. We promise to cover all defects. If you h....
Check Stock

Canomo Flute Cleaning Kit Includes 1 Pack Flute Cotton Cleaning Brush Swab, 1 Pair Cotton Gloves and 1 Pieces Screwdriver for Flute Repair and Cleaning

  • ★ Cleaning swab:cotton, metal,Approx. 36 cm/ 14.2 inches Easy to reach the length of the flute body and clean the inside tube,Lightweight, portable, convenient and easy to store and hang..
  • ★ Double dust brush:Approx. 17.5 cm/ 6.8 inches Made of plastic and nylon, Give your instrument a complete cleaning,Durable and safe..
  • ★ Screwdriver length is 8.5cm/ 3.3inch,make you more convenient and tidy when cleaning and repairing flutes,Supplied with 1 Pair Cotton Gloves and 1Pcs Cleaning Cloth(7.8*7.8inch)..
  • ★ Package includes: 1 Pcs Flute Cotton Cleaning Brush Swab, 1 Pcs Dust Brush,1 Pieces Screwdriver for Flute Repair and Cleaning,2 Pair Cotton Gloves and 1Pcs Cleaning Cloth..
  • ★ Note: because the material is soft, maybe extruding during transportation and look like not so fluffy. But it can be restored by hand or by washing and drying..
Check Stock

Red Devil 3986 Skeleton Caulk Gun Thrust Ratio 10:1

  • 10:1 THRUST RATIO: Ideal for extruding light to medium viscosity materials.
  • UNI RAIL CONSTRUCTION: Provides durability and lays flat for space savings.
  • HEX PISTON ROD: Extrudes material smoothly.
  • PUSH RELEASE LEVER: Offers quick stopping of material flow.
  • COMPATIBLE WITH STANDARD SIZE CARTRIDGES: Use with standard size caulk or adhesive tubes.
Check Stock

SKYNEO Flute Cotton Cleaning Brush Kit Includes 1 Pcs Flute Cotton Cleaning Brush Swab, 1 Pcs Cleaning Rod, 1 Pcs Dust Brush, 1 Slide Grease and Other Accessory Tools for Flute Repair and Cleaning

  • ★ Cleaning swab:cotton, metal,Approx. 36 cm/ 14.2 inch Easy to reach the length of the flute body and clean the inside tube,Lightweight, portable, convenient and easy to store and hang.
  • plastic stick:to better keep flute dry and clean,Cleaning Rod Approx 34.5 cm/ 13.6 inch..
  • ★ Double dust brush:Approx. 17.5 cm/ 6.8 inches Made of plastic and nylon, Give your instrument a complete cleaning,Durable and safe.
  • Premium slide grease:brings quality to your musical instrument tuning slide maintenance. Easy to use without breaking down as the instrument warms up..
  • ★ Screwdriver length is 8.5cm/ 3.3inch,make you more convenient and tidy when cleaning and repairing flutes,Supplied with 1 Pair Cotton Gloves and 2Pcs Cleaning Cloth(7.8*7.8inch)..
  • ★ Package includes: 1 Pcs Flute Cotton Cleaning Brush Swab, 1 Pcs Dust Brush,1 Pcs Cleaning Rod,1 Pieces Screwdriver for Flute Repair and Cleaning,1 Slide Grease,1 Pair Cotton Gloves and 2Pcs Cleaning Cloth..
  • ★ Note: because the material is soft, maybe extruding during transportation and look like not so fluffy. But it can be restored by hand or by washing and drying..
Check Stock

Philips Kitchen Appliances Noodle HR2357/05 Retail Box Packaging, Pasta Maker Plus, One Size

  • With powerful and automatic mixing, kneading and extruding, the Philips pasta maker allows you to make a pound of fresh pasta or noodles within 10 minutes!. Cord length : 40 Inches.
Check Stock