Reviews Plastic Profile Production Line

Lisle 37140 Disconnect Pliers, 45 Degree

  • The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
  • Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.
Check Stock

150 Pieces 2020 Series T Nuts T-Slot Nut Hammer Head Fastener -Plated Carbon Steel Sliding T Nuts for Aluminum Profile M5

  • Product model: 2020 series slot nut, they are widely applied in many occasions, such as building industrial aluminum frame structures, 3D printers, CNC routers, CNC laser cutters, robotics projects, more.
  • Quality material: the T nuts are made of quality steel forging and pressing, which has the characteristics of high hardness and strong stamping resistance. The surface is -plated, which can effectively prevent corrosion and rust as well as improve the service life.
  • Wide application: the sliding T nuts are suitable for 20 series aluminum profile, such as CNC machine tools, industrial fences, production line operation tables, shelves and so on.
  • Easy installation: simply put the nut head into the groove in the direction of the profile groove, and rotate it 90 degrees clockwise, it can automatically lock when it is installed.
  • Enough quantity: package includes 150 pieces of 2020 series T slot nuts in total, enough quantity to meet your needs for different purposes.
Check Stock

Double Head Sheet Metal Nibbler Cutter 360 Degree Adjustable Power Drill Nibbler Cutting Tools Kit for Straight Curve and Circle Cutting

  • Excellent cutting effect without any burrs and edges, you can use it to cut out straight line, curve line, arc line or many other irregular lines and shapes.
  • Maximum cutting capacities: Iron Sheet: 1.8mm, stainless steel 1.2mm, copper/aluminium plate 2mm, plastic/fibreboard 2mm.
  • Ergonomic design handle for comfortable using experience, 360 degree adjustable with cutting speed of 1500 - 3000rpm.
  • Double head design allow you to continue cutting with the other cutting edge when one side is dull.
  • Suitable for car repair and maintenance and metal sheet production.
Check Stock

BriskHeat RH48 XtremeFLEX RH Plastic Bending Strip Heater, Strip Heater, W x L: 0.5 x 48-Inch, 120VAC

  • RH plastic bending strip heater quickly softens acrylic sheets for easy bending.
  • Multi-stranded resistance wire is reinforced with fiberglass knit-and-braided construction that provides even heat across the surface.
  • Provides radiant line of heat, heater never comes in contact with the plastic.
  • designed for production and craft makers for such applications as plastic photo frames, arts and crafts, and custom work shop fabricating.
Check Stock

POWERTEC 71080 Plastic Center Finder – Wood Turner Tools Series

  • FUNCTION: Provides you with a quick, easy and accurate method of finding the center on a piece of wood stock.
  • VERSATILE: Used by professional woodworkers and DIY enthusiast to find the exact center of any round, square, or octagonal wood piece (up to 8”) or hexagonal wood pieces (up to 5-3/4”).
  • QUALITY: Manufactured with a premium, lightweight design that features impact-resistant plastic for long-term durability – plus this center finder woodworking tool possesses a colored, semitransparent profile for optimal visibility.
  • EASY TO USE: To find the center, simply place tool on corner, mark a line, rotate it 90 degrees and mark a second line.
Check Stock

Millrose 76001 Monster Heavy-Duty Industrial Grade with PTFE, 4 Fl. Oz, Blue

  • Specially formulated for production line use.
  • Inert and compatible with a very wide range of materials.
  • Use Blue Monster on threads made from all metals, PVC, CPVC, ABS and nylon plastic pipe.
Check Stock

D·D DYNAMIC DISCS Latitude 64 Opto Sapphire Beginner Friendly Disc Golf Driver | Easy to Throw Control Distance Driver Frisbee Golf Disc | 160g and Under | Stamp Color May Vary (Orange)

  • SLIM PROFILE: It has a slim profile for smooth releases, and it is easy to get a good grip, especially for those of you with smaller hands..
  • FLIGHT RATINGS: Speed: 10 Glide: 6 Turn: -2 Fade: 1.5.
  • ABOUT OPTO PLASTIC: Opto is made out of some of the world's most durable plastics. It comes in a variety of beautiful translucent colors. The Opto Line plastic has been developed to withstand severe punishment and extreme conditions better than other plastics..
  • 100% MONEY BACK: If you are not completely satisfied with your purchase, return the item for 100% back guarantee!.
Check Stock

D·D DYNAMIC DISCS Latitude 64 Opto Sapphire Beginner Friendly Disc Golf Driver | Easy to Throw Control Distance Driver Frisbee Golf Disc | 160g and Under | Stamp Color May Vary (Purple)

  • SLIM PROFILE: It has a slim profile for smooth releases, and it is easy to get a good grip, especially for those of you with smaller hands..
  • FLIGHT RATINGS: Speed: 10 Glide: 6 Turn: -2 Fade: 1.5.
  • ABOUT OPTO PLASTIC: Opto is made out of some of the world's most durable plastics. It comes in a variety of beautiful translucent colors. The Opto Line plastic has been developed to withstand severe punishment and extreme conditions better than other plastics..
  • 100% MONEY BACK: If you are not completely satisfied with your purchase, return the item for 100% back guarantee!.
Check Stock

Brian Tooley BTR Stage 2 Naturally Aspirated Cam and Spring Kit LS1 LS6 LS2 5.7 6.0

  • Good idle for daily usage or towing. Great low end and mid range torque..
  • 214/224 Duration at .050". 112 Degree Lobe Separation Angle. 0.443"/0.465" Valve Lift.
  • Lunati Cam and Lifter Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Budget Conscious Power Production - Ideal for budget minded hotrodders, the Lunati Bare Bones camshaft series delivers serious horsepower increases without breaking the bank..
  • Modern Profile - Thanks to an asymmetrical lobe design, the Lunati Bare Bones line greatly increases throttle response and acceleration..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
Check Stock

Scotch Fine Line Tape 218, High-Performance, Polypropylene Plastic, Instant Adhesion, Moisture and Solvent Resistant, Green Color, 1 in x 60 yd, 5.0 mil, 36/Case

  • FINE LINE PAINT MASKING: High-performance fine line tape that’s ideal for painting long straight lines with crisp edges.
  • POLYPROPYLENE PLASTIC TAPE: Durable resistance to most solvents and moisture.
  • IDEAL FOR MULTI-COLOR AND CUSTOM GRAPHICS: Low profile and high adhesion provide excellent color line separation.
  • RECOMMENDED MASKING APPLICATIONS: Specialty vehicle, automotive, rail, marine and aerospace paint jobs.
  • HIGH TEMPERATURE PERFORMANCE: Resists heat in bake cycles up to 250 °F/121 °C for up to 30 minutes.
  • For industrial/occupational use only. Not for consumer sale or use..
Check Stock

60Pcs Cutting Wheel Set for Rotary Tool, Mini HSS Saw Blades Cutter, Resin Cut Off Wheels Disc, Diamond Cutting Kit with Mandrels for Wood Metal Glass Plastic Stone

  • Widely used. Covers all the bases with quality products at a price any operator can afford. Ideal for cutting, grooving and trimming wood, plastic, ceramics, metal and DIY production. Compatible with electric grinders, electric drills, hanging grinders, etc..
  • Resin cutting wheels: With low heat generation and thin cutting line, they are used to cut iron, aluminum, chassis modification, thin metal circuit board, and DIY production after connected with mandrels..
  • HSS saw blades: High-speed steel and 6 kinds of outer diameters 22/25/32/35/44/50mm. Suitable for cutting wood, plastic, PVC pipe, etc..
  • Diamond cutting wheels: Made of high-quality diamond. With high cutting efficiency, high durability, stable quality. Suitable for cutting gems, jade, brick, marble, glass, etc..
  • Attention: For your safety, please wear gloves and goggles when operating. It may become scorching hot when using diamond cutting wheels. Please add some water to keep it cool..
Check Stock

Lunati 10120102LK Bare Bones 224/234 Hydraulic Flat Cam/Lifter Kit for 262-400 Chevrolet Small Block

  • Noticable idle, great mid range and upper RPM power. Great for street performance or mild bracket racing.
  • 224/234 Duration at .050". 112 Degree Lobe Separation Angle. 0.465"/0.488" Valve Lift.
  • Lunati Cam and Lifter Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
  • Budget Conscious Power Production - Ideal for budget minded hotrodders, the Lunati Bare Bones camshaft series delivers serious horsepower increases without breaking the bank..
  • Modern Profile - Thanks to an asymmetrical lobe design, the Lunati Bare Bones line greatly increases throttle response and acceleration..
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..
  • Noticeable idle, great mid range and upper RPM power.
Check Stock

Grave Digging

  • GUN SAFE MOUNTING SOLUTIONS: Customized for standard "Mil-Spec" AR-10 and 1 Magpul PMAG, our rifle mount latches directly into the magazine release and locks in to ensure that your gun is ready to be put safely on display.
  • PROUDLY MADE IN AMERICA: At Spartan Mounts, all of our products are made in the U.S.A. from raw plastic sourced from American producers, and everything in our product line is manufactured just north of Pittsburgh, PA.
  • LOW PROFILE, AMBIDEXTROUS DESIGN: Our ambidextrous mount allows both left and right mounting, and is a lower profile design that covers a small area so that your firearm is the center of attention when on display.
  • HORIZONTAL AND VERTICAL MOUNTING: Each holder is extremely versatile and can be angled or mounted in all directions to accommodate AR-10 rifles.
  • Please note that this model does not fit the 308 DPMS or Armalite AR-10b.
Check Stock