Reviews Plastic Printer

Safco Products Wave Underdesk Printer Stand 1861GR, Gray Powder Coat Finish, Swivel Wheels for Mobility, 50 lb. Capacity, Light Gray

  • EASY AND EFFECTIVE: The printer stand is the best economical choice to keep office machines, such as printers, under a desk. Conveniently place under office desk for easy access to printer or printer accessories..
  • OPTIMAL STORAGE SPACE: The shelf dimensions: 19 1/2"W x 17 5/8"D x 1 1/2"H, allow sufficient space for printer and printer accessories. The finished product dimensions: 20"W x 17 1/2"D x 11 1/2" H, give you room to store printer stand underneath office desk to give you optimal room in your workplace environment..
  • AESTHETICALLY PLEASING: The charcoal columns with light gray shelves make for the perfect combination in your private office, collaborative spaces, classrooms, libraries, etc..
  • MOBILE and EFFICIENT: The four swivel dual wheel carpet casters, 2 locking, allows for quick and easy mobile movement of the printer stand. Efficiently move your printer and printer accessories into a new office space all at once..
  • STURDY PLASTIC CONSTRUCTION: With tool-less assembly, optimizing your workspace customization has never been easier. The plastic printer stand makes for lightweight assemblance..
Check Stock

ZBRANDS // Printer Stand Cart Max, 24\ x 14\

  • ... Each printer stand is mobile with included caster wheels and can move the printer around easily between offices, conference rooms and meeting areas. Two wheels lock to keep it from moving while in use for safety and security..
  • ✅ STURDY & DURABLE: The cart's steel rods provides stability while each hard sturdy ABS plastic shelf resist chipping and scratching. Each shelf can accomodate up to 40 lbs of weight. Easily store backup paper and other supplies on the bottom shelf while housing your main printer unit on top..
  • ✅ HOLD UP TO 40LBS - Each shelf can hold up to 40lbs.
  • allowing you to store and organize many small home office equipment and supplies. Store paper reams, ink cartridge and folders. Both the top and bottom shelf are height adjustable to suit your precise needs..
Check Stock

Mount-It! Under Desk Printer Stand with Wheels | Mobile Printer and Fax Cart with Storage Shelf for Office and Home Use, 2 Tiers (Black)

  • ROLLING PRINTER STAND: Compact under desk printer cart can take large printers, fax machines, or scanners and easily tuck them underneath most desks, freeing up space everywhere else in your office..
  • PORTABLE PRINTER CART comes with 4 omnidirectional wheels that independently swivel and glide to where you need it. Once your printer stand is in place, lock the printer cart wheels and keep everything secure..
  • 2-TIER PRINTER STAND can store your printer, paper, extra toner, and other supplies easily..
  • HEAVY-DUTY DESIGN: Steel wire frame, solid metal poles and durable laminate top provides remarkable stability and support to this office cart. Weight capacity of 100 lbs. (50 lbs each shelf). Powder coat finish resists chipping and scratching for a professional look..
  • EASY TO ASSEMBLE: Set up your printer stand with wheels in minutes with the easy to connect two-part plastic clips..
Check Stock

Brady BMP21-PLUS-BATTCOV Spare Battery Cover

  • For use with the BMP21-PLUS label printer.
  • Brady BMP21-PLUS combines toolbox-ready ruggedness and world class materials in an economical grab-and-go printer.
  • The yellow plastic cover snaps in place over the battery compartment.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Black PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Blue PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Silver PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Silver - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Purple PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Purple - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm Yellow PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: Yellow - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

Matica MC320 Direct-to-Card Dual Sided ID Card Printer & Complete Supplies Package with Bodno Bronze Edition ID Software

  • MATICA MC320 ID CARD PRINTER prints high-definition plastic (PVC) ID cards and professional badges for government issued ID cards, employees,....
  • COMPLETE PACKAGE includes everything you need to start printing – Matica MC320 dual-sided printer, chromXpert YMCKO MC320 Color Ribbon (BD32100 -....
  • DIRECT-TO-CARD PRINTING The Matica MC320 direct-to-card printer offers a superior print quality and a complete line of encoding, lamination and....
  • PRINTER SPECS Card hopper capacity - Input 100 cards/Output 30 cards. Print speed - Full Color 20 seconds per card, Black 6 seconds per card. Printer....
  • WARRANTY & SUPPORT 3-year warranty included for the printer hardware. Lifetime support for Bodno's software - we're ALWAYS here to help you with any....
Check Stock

HUANUO Under Desk Printer Stand, 2 Tier Printer Cart for Storage, Mobile Printer Table with Swivel Wheels, Holds up to 100lbs, Perfect Desk Organizer Shelf for Home & Office, HNPS02

  • VERSATILE STAND: This multipurpose 2-tier printer table can be used as an under desk printer stand, book shelf, snack storage stand, or office organizer. Excellent solution for home and office storage. Assembled cart measures 16.3” wide, 16.3” tall, 12.2” deep.
  • ORGANIZE YOUR SPACE: This 2-tier printer stand can easily store your printer, paper, extra toner, and other supplies. The printer cart fits neatly under most desks and helps reduce clutter to free up more office space..
  • EASY TO MOVE: 360° swivel casters allow the printer cart to roll smoothly around the office, conference room, kitchen, living room, and other spaces. 2 wheels feature a locking brake to keep the printer stand stationary when needed..
  • STRONG AND DURABLE: The steel frame of the printer stand with storage provides exceptional stability. The durable laminate top is sturdy to support your printer or other office equipment. Weight capacity: 100 lbs (50 lbs for each shelf)..
  • EASY TO ASSEMBLE: To assemble the printer stand, simply screw on the caster wheels and attach the plastic clips to the grooves on the poles. Then slide the wire shelf onto the metal poles. Repeat steps for top shelf. Includes wrench for installation..
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament Refill Bundle

  • A 3D Printer accessories combo - 1.75mm True Red PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Refill Filament Specs: True Red - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
  • Use less plastic with PLA RPO Refill: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock