Reviews Plastic Bearing Bushing

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed includes LS1 LS2 LS3 LQ9 LQ4 Rocker Arm Support Pedestal Stands.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts and Pair of Rocker Arm Support Pedestal Stands ..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater sur....
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

BEARING BUSHING KIT | For Steering Column Intermediate Shaft Lower | 905-512 | w/Bushing Lube 2 YEAR WARRANTY REPLACEMENT !

  • 【 BUSHING / BEARING】Mounts in the lower steering column . . . . . . . ..
  • 【DIRECT REPLACEMENT】 . . . . .OE Quality. .Built to strict quality control standards.
  • 【KIT】Bushing Kit W/ shaft lube Plastic construction for long-lasting durability..
  • 【OE PART NUMBERS】 OE part number: 88963617 - 905-512.
  • 【VERIFY FITMENT : CLICK SEE BELOW **** PRODUCT DETAILS******.
Check Stock

Hotop, 6 Pieces Thick Reducing Bushing Adapters Steel Reducer for Bench Grinding Sanding Wheels Id 12 Inch Od 58 Inch, 34 1 (1 Inch)

  • Auto Metric Bearing Bushing Driver Set Auto Bearing Race And Seal Driver Set, Bearing and Bushing Isolator Driver Set..
  • Used in import and domestic cars trucks tractors construction equipment electric motors and many other components having bushings.
  • Includes 3 sizes of drivers/handles: small (4-1/2inches long x 7/16inches diameter), medium (5-1/2inches long x 5/8inches diameter) , and large (6-1/4inches long x 7/8inches diameter).
  • Includes 30 bushing drivers both metric and standard.
Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

  • EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
  • SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
  • You can save hundreds of dollars by using this one pilot puller.
  • VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
  • This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
  • DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
  • This blind hole bearing puller is built to last.
  • DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

OTC 27794 1/2\-3\ Bushing Driver

  • Specially selected to provide the driver sizes usually needed in automotive service.
  • Proper-size driver for nearly any automotive seal bearing or bushing installation job.
  • Set includes 41 discs along with handles spacers and drivers ranging from 1/2 to 3" in diameter.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Cal Hawk Tools CZTJWW Trailer Jack Wheel

  • 1200 pound capacity High-Density polyethylene caster with Zinc plated carbon steel bolt, bearing and bushing.
  • Bushing dimensions: 11/16" diameter x 2-1/8" long.
  • Bolt dimensions: 1/2" diameter x 3" long.
Check Stock

5 Lug Front Wheel Hub & Bearing Assembly Pair Set for 01-06 Lexus LS430

  • ULTRA STURDINESS & DURABILITY: Forged from high strength aluminum for extra durability and strength, the driver and discs feature extraordinarily long service life and won’t mark the bearings. The solid, knurled handle offers extra grip and control during use..
  • VERSATILITY: Collars/discs of 9 different sizes fit standard races used in most wheel bearing applications..
  • EASY USAGE: To use, simply select the correct bushing, align straight and centered, and then pound in/out. Suitable for seating bearings on cars, small engine trucks, motorcycles, etc..
  • CONVENIENT STORAGE: This set comes in a blow-molded plastic carrying case for easy transport, simple storage, and quick organization..
  • ALL-IN-ONE: Our 9-disc and 1-driver set simplifies bearing installation for everyone from master mechanics to DIY novices. Our super sturdy and well-designed tool set guarantees long service life without damaging your bearings..
Check Stock

MaxAuto 14 x 1.75' Spoked Plastic Wheel with Tire, Black,2 Pack, 1.75' Offset Hub Length,1/2' inside Bearing

  • Please check your existing tire Sidewall for tire, hub and bushing size to ensure proper replacement fit..
  • Plastic spoked wheel,Load capacity/speed: 150 lbs.
  • 1.75" tire width(The actual width of the tire much closer to 2.00").
  • 1.75" Offset Hub Length,1/2" inside Bearing.
Check Stock

BTSHUB 21 pcs Bushing Removal Tool, Bearing, and Seal Driver Set 70mm - 150mm Discs Extra Large

  • PROFESSIONAL BEARING TOOL KIT - Extra Large custom bush, bearing and seal driver set, with ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance. Allows you to build your own custom bushing driver so you always have the right size for the job.
  • DISCS SIZES RANGE -The discs go from 70mm (2.75 inches) all the way to 150 mm (5.9 inches) in 5 mm(0.2 inches) increments..
  • EASY OPERATION - All discs are connected with a 12mm shaft and screw which quickly connects to a 280mm (11" ) handle, help you remove or install bearings quickly and professionally.
  • INTERCHANGEABLE - All the 17 pieces discs are interchangeable with each other, allowing the mechanic to complete the job quickly, professionally and promptly.
  • DURABLE CARRYING CASE: Comes with a heavy-duty plastic case with precision-sized compartments for every piece - ideal for storage and transport.
Check Stock