Reviews Plaster Board Forming Machine

Tabbed Lath Washer 1-1/4 Diameter Galvanized 1,000 Box

  • Used for the Attachment of Metal and Plastic Lath, Plaster Repair, Insulation Board, and Gypsum Sheathings.
  • 4 Keyholes for Bonding of Plaster and Basecoats.
  • 4 Tabs for Pre-Spotting Washer into Soft Material Such as Insulation Board.
  • Center Hole will Accommodate Screws to #12.
Check Stock

Stanley 21-115 Surform Shaver, 3 Pack

  • Premium high strength body and comfort grip plastic handle.
  • Precision flat blade for forming wood, body fillers, vinyl, plaster, fiberglass and more.
  • Includes 1x replaceable 10" flat cheesegrater blade.
  • Compatible with AES-295-1 Half Round Surform "Cheesegrater" Blades.
Check Stock

Surform Shaver Tool

  • Premium high strength body and comfort grip 3 position adjustable handle.
  • Precision flat blade for forming wood, body fillers, vinyl, plaster, fiberglass and more.
  • Includes 1x replaceable 10" flat cheesegrater blade.
  • Compatible with AES-295-1 Half Round Surform "Cheesegrater" Blades.
Check Stock

American Orthopaedic Cast Cutter, Replacement Blades Titanium Nitride Coated 2.5” (6.1cm)

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

BAOSHISHAN Electric Cast Cutter Plaster Saw Cast Saw for Plaster Bandage with 3 Saw Blades 110V Red

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

BAOSHISHAN Cast Removal Saw Cast Cutter Electric Plaster Saw Oscillating Speed Adjustable for Tearing Polymeric Materials 110V BLUE

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock

KEYSTONE - Splint Material - .100in ( 2.5mm )- 25pk - 5in x5in sheets- 103927 Us Dental Depot

  • Strong Structure Dental Vacuum Former machine dental lab equipment.
  • Dental Vacuum Former Forming and Molding Machine.
  • Dental Vacuum Forming Molding Former Machine.
  • Dental Lab Equipment Thermoforming Vacuum Machine.
Check Stock

Steel Punches Flower Punch Stamp Set Jewelry Metal Stamping Tools DIY Craft Tool 20 Pcs/set

  • Put the material into the plaster moldbowl,by welding machine suit or tiger skin suit before heating the mold, heating the raw material and add a little borax.003cbr003e.
  • When the gold and silver to complete melt, become optimum flow state ,use die sludge depressed quickly .003cbr003e.
  • After one minute of gold and silver and other liquid solidification.gently tapping the plaster mold with a hammer, plaster mold until the crack.003cbr003e.
  • Removed the jewelery blanks.Wash in the ultrasonic cleaning machine, use a hair to clean the gypsum powder.003cbr003e.
  • Jewelry finishing shape (chain type need to be welding), Finally, deal with the gold drum by agate polishing machine or hand-polished.003cbr003e.
Check Stock

Electric Plaster Saw Speed Adjustable Plaster Cast Cutter for Tearing Polymeric Materials Plaster (110V Green)

  • Oscillating frequency is greater than 12500 times/min. Oscillating angle is 5 degrees..
  • This product is used for the removal of plaster bandage after fixed reduction. Suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • Operation of plaster: Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
Check Stock

Ships Within 1 Biz Day from NV - Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Lath & Plaster, Hardi Board - Ships Within 1 Biz Day from NV

  • 1" deep - Hard tungsten carbide grit edge for a long life in abrasive materials.
  • Continuous cutting edge for smooth cutting even in wood lath and plaster.
  • Cuts through drywall, plaster (NO Concrete), CornHole board, fiber cement Hardie board, acoustical tile, ceiling tile.
  • Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model for straight cuts.
  • SHIPS WITHIN 1 BUSINESS DAY FROM OUR NV WAREHOUSE.
Check Stock

Screw Products DW-8212C-20 8 X 2.5 in. Phillips Bugle Head with A Phosphate Coating - 2120 Piece

  • They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board,.
Check Stock

20 Sheets 1.0MM Dental Hard Splint, Thermoforming Materials for Vacuum Forming Machine 5''x 5''

  • ✔【Application】：Thermoforming dental splint sheets, used on the vacuum forming machine to make oral cavity shape negative mold, orthodontic retainer, mouth guard, night guard and teeth whitening tray..
  • ✔【Excellent Thermoformability】：Shows good ductility when heated at high temperature, our sheets can form a accurate mold cooperates with vacuum forming machine. No bubble, excellent thermoformability. Recover good mechanical strength after cooling, with excellent wear resistance and stability..
  • ✔【High Quality】: These vacuum forming splint sheets are made of high quality material. Our forming sheets are double-protected by external aluminum foil bag and internal protective sheets. Smooth surface, easy to clean..
  • ✔【Professional】：Not easy to dye, yellowing and aging, environmental friendly. Outstanding impact resistance, good machinability, and nice wear. We provide high quality vacuum former sheets for dentist, dental labs and students..
  • ✔【Instructions】: Tear off the white protective paper before use. Use vacuum forming machine to heat for about 2-3 minutes to make it soft then vacuum and molding. After cooling and trimming, get a beautiful orthodontic retainer and it can effectively fix the teeth..
Check Stock