Reviews Plasma Torch Height Controler
WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch
- These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
- Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
- Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
- The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
- Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
- All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check StockWeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack
- These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
- Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
- Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
- The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
- Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
- All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check StockDyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc
- 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
- It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
- 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
- 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
- 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
- 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check StockSL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs
- Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
- SL40 plasma torch consumables Ref code—9-0096 9-0094.
- The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200,1-4200-7,7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
- The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
- The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check StockThermal Dynamics Cutmaster 42 40 Amp Tip 9-0094, 5 pack
- 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch (Torch Ref. Code 7-0040).
- 10pcs Plasma Cutting Electrode,ref code 9-0096.
- 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0094, cutting current is 40A.
- 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
- PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check StockWeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs
- Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
- SL40 plasma torch consumables Ref code—9-0096 9-0094.
- The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200,1-4200-7,7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
- The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
- The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stockhynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)
- Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
- Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
- 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
- CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check StockWeldingStop Plasma Consumables Fit Miller Spectrum 3080 Cutter ICE-80CX Torch 212724 Electrode 212726 Tip Drag Shield 212730 PKG/25
- The electrodes and tips in the list can be used on Miller Spectrum 3080 Plasma Cutter ICE-80CX Torch (Torch Ref. Number: 216300, 218044).
- This list contains 10 x 212724 Plasma Electrode.
- And 10 x 212726 Plasma Tip / Nozzle + 5 x 212730 Plasma Drag Shield Cup.
- The Nozzles or tips plasma cutting current need under 80A.
- All the plasma cutting torch consumables for ICE-80CX torch are Replacement Parts, NOT Miller Original Kits.
Check StockPlasma Torch Electrode Tip Drag Shield for Miller Spectrum 875 Cutter ICE-60T/TM 25pcs
- 25pcs ICE-60T plasma torch consumables can fit Miller Spectrum 875 plasma cutter machine.
- CAN NOT fit Spectrum 875 plasma cutter XT60 torch.
- Plasma electrode x 10pcs, reference code 212724.
- Plasma tip / nozzle x 10pcs, reference code 219676.
- Plasma drag shield x 5pcs, reference code 212730.
- This is ICE-60T plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check StockWeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables
- The Standoff Guide 9-8281 used for Drag cutting.
- the Standoff Guide 9-8281 need work with shield cap 9-8218.
- The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
- can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
- The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
- The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check StockWS SL60 SL100 Torch Start Cartridge 9-8213 9-8277 for Thermal Dynamics Cutmaster 38/52/82/102/152 Plasma Cutter Torch Consumables
- Plasma consumable type : Start Cartridge.
- The Start Cartridge Reference code : 9-8213 / 9-8277.
- The Start Cartridge can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
- can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
- The Start Cartridge can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
- This 9-8213 Start Cartridge are replacement parts which produced according to the standard size , and not original.
Check StockPack-42 WS OEMed KP2062-3B1 Nozzle Tip KP2063-1B1 Electrode KP2065-1 Drag Cup Fit Lincoln PRO-Cut Plasma Cutting Torch
- The package will include 20pcs of Electrode, 20pcs of Tip and 2pcs of Drag Shield Cap.
- There are 42 pieces plasma cutting torch consumables in the package, Electrode (KP2063-1B1), Tip/Nozzle(KP2062-3B1) and Drag Shield Cup(KP2065-1).
- The electrodes, tips and other consumables are fitting in Lincoln PRO-CUT 55/80 plasma cutting torch, not PRO-CUT 25 Plasma Cutting Torch, or PCT20/80 Plasma Cutting Torch.
- The diameter or this KP2062-3B1 Tip or Nozzle is 1.3mm or 0.053'', it also lack vortex / swirl device.
- All the plasma cutter torch consumables are aftermarket kits and replacement parts, NOT Brand or Original.
Check StockWeldingStop Shield Cap 9-8218 for Thermal Dynamic Cutmaster 52/82/102/152 SL60 SL100 Plasma Cutter Torch Consumables PK-1[Black 9-8218 Level Up]
- The Shield Cap 9-8218 used for Drag cutting.
- the Standoff Guide 9-8218 need work with Standoff Guide 9-8281.
- The Shield Cap can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
- can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
- The Plasma Shield Cap can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
- This 9-8218 Shield Cap are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock