Reviews Plasma Cutting Gloves

Thermal Dynamics Cutmaster 42 40 Amp Tip 9-0094, 5 pack

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch (Torch Ref. Code 7-0040).
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0094, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Sellstrom Faceshield Flip Window, Shade 5 IR, 8x8in

  • Polycarbonate Shade 6 IR visor for oxy/acetylene cutting, brazing and plasma cutting - added protection from UV/IR rays.
  • Meets ANSI Z87.1+ and CSA Z94.3 standards when assembled with Sellstrom 380 series face shields.
  • Measures 9.25" width by 4.375" height by 0.070" thick.
  • Gloves, Eyewear, Ear Protection, Masks & Clothing.
Check Stock

W.S SL40 Consumables Kit Electrode Tip Standoff for Thermal Dynamics Cutmaster 42 Plasma Cutter Torch 9-0093 9-0096 9-8251 QTY-22 Copper

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch Consumables.
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0093, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • Dual voltage plasma cutter :This is a 110/220V Non-HF Blow Back Pilot Arc Plasma Cutter, Input Power AC110/220V±15%,AC110/220V 55A cutting current with 60% duty cycle, 220V 55Amps 110V 35Amps Cutting Current.The working power range from 100V to 250V, Under 220V Pilot arc will not reliable if the voltage lower than 190V. Under 110V, the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma....
Check Stock

Drag Shield Hand 60485 Retaining Cup 60389C fit Plasma Cutting IPT-60 PT-60 Torch 6-PKG

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 6pcs plasma cutter IPT60 consumables in every package.
  • The plasma cutting current is about 30-60A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop PT-60 IPT-60 Retaining Cap 60389C Drag Shield 60485 Electrode Plasma Contact Cutting Consumables PKG/46

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 20pcs Electrodes + Tips and 1pc Retaining Cup + 5pcs Drag Shield.
  • There are 46pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

WeldingStop 0.9mm Contact Tip IPT-60 PT-60 electrode drag shield retaining cup 30-40A plasma cutting nozzle 23pcs

  • These plasma cutting torch consumables can use on IPT-60, IPTM-60, PT-60, PTM-60 Series plasma cutting torch.
  • Package including 10pcs Electrodes + Tips and 1pc Retaining Cup + 2pcs Drag Shield.
  • There are 23pcs plasma cutter IPT60 consumables in every package.
  • The diameter of tips are 0.9mm or 0.035 inches, plasma cutting current is about 30-40A.
  • They are WS replacement parts, NOT Original plasma consumables kits.
Check Stock