Reviews Plasma Coater

Dual Edge Aluminum Emulsion Scoop Coater for Silk Screen Printing Coating Tool (6 Inch)

  • The emulsion Scoop Coater is the coating tool that used for silkscreen printing, 6 Inch Recommend for Frame Size: 9" x 14” OD..
  • The Dual Edges Scoop coater are designed to use for silk screen of all mesh count (sharp edge for higher mesh counts and rounded edge lower mesh counts).
  • Made from hard anodized aluminum with plastic end guidance caps.
  • Plastic end caps of the scoop coater is designed for easy and comfortable handling while providing guidance to coat a smooth layer of emulsion on your screens.
  • These scoop coaters also come with two special rubber edge protectors to keep your scoop coater smooth and prevent cuts or scratches..
Check Stock

KBS Coatings 57201 Gloss Black Ultimate Frame Coater Kit, Inside Out Rust Protection for Entire Truck or Car Frame

  • The Ultimate Frame Coater Kit comes with everything you need: KBS Klean Quart, RustBlast Quart, RustSeal Gloss Black Quart, Cavity Coater Aerosol, Cavity Wand, Nitrile Gloves, Brushes, Stir Stick..
  • The Ultimate Frame Coater Kit is designed to give you want you need to stop rust from the inside out. RustSeal on the outside and Cavity Coater on the inside..
  • RustSeal is a waterproof coating that is strengthened by repeated exposure to moisture..
  • RustSeal is highly abrasion and chemical resistant. RustSeal also repels fuels, oils, most acids and alkalis, and graffiti!.
  • RustSeal can be brushed, rolled or sprayed. RustSeal featured superior flow out making a brushed surface look like it has been sprayed..
Check Stock

KBS Coatings 60304 Ford Corporate Blue Motor Coater Engine Paint - 1 Pint

  • Motor Coater is easy to apply, offers superb coverage and yields a self-leveling (brushable) professional looking finish..
  • Motor Coater colors are an exact match for the original color offering a rich, deep factory finish..
  • Motor Coater is very durable protecting your engine from chips, chemicals and heat..
  • Oil, Transmission Fluid and Gas Resistant.
Check Stock

KBS Coatings 75101 Cavity Coater and Wand, 16 fl oz.

  • KBS Cavity Coater is the Perfect Solution for hard to reach areas that are prone to rusting.
  • Cavity Coater provides a self healing film which renders over 4000+ hrs. salt spray protection (meaning Insane Rust Protection) ...over 4 times the protection of conventional cavity waxes.
  • Use Cavity Coater with a KBS Cavity Wand to give long lasting protection for those hard to reach enclosed cavities such as rocker panels, boxed frames, inside doors And fenders, deck lids, tailgates...and more.
  • Resists alkaline solutions, most chemical and acid vapors, road salt, steam, salt water. Wicks and penetrates where primers and topcoats cannot!.
  • Creeps into Welds and Seams. 4000+ Hrs. Salt Spray (Insane Rust Protection)!.
Check Stock

Dyllica 9-8213 Plasma Start Cartridge 9-8277 for Thermal Dynamics CutMaster 52 Consumables SL60 SL100 Plasma Part Consumables 1pc

  • 【Dyllica Brand Plasma Start Cartridge】The plasma Start Cartridge 9-8277 is made by Dyllica Brand.
  • It can be used as plasma aftermarket parts which can install on DYThermal Dynamics SL60 SL100 plasma torch.
  • 【Plasma Consumables Type & Ref Number】Plasma Start Cartridge, item ref number is 9-8213 / 9-8277.
  • 【As SL60 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge can install on DYThermal Dynamics SL60 torch with Cutmaster 38 / 52 / 12 / 20 /25 plasma cutter machine.
  • 【As SL100 Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal Dynamics SL100 torch with Cutmaster 102 / 152 / 40 plasma cutter machine.
  • 【As SL60QL Plasma Consumables Usage】The 9-8213 /9-8277 Plasma Start Cartridge also can install on DYThermal DynamicsSL60QL torch with Cutmaster 58 / 60i plasma cutter machine.
Check Stock

WeldingStop 770496 770723 Electrode Tip for Hobart Plasma Cutter Airforce 250ci HP-25 and AirForce 500i HP-50 Torch

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770723 plasma cutter parts kit including 5pcs electrodes and 5pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 10pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

WeldingStop 770496 Electrode and Tip Kit for Hobart AirForce 250ci 500i HP-25 HP-50 Plasma Torch 4-Pack

  • These hobart plasma cutter consumables are fitting in AirForce 250ci plasma cutter HP-25 torch and AirForce 500i cutter HP-50 plasma torch.
  • Ref. code of AirForce 250ci plasma cutter is 500534, HP-25 torch is 232647.
  • Ref. code of AirForce 500i plasma cutter is 500548, HP-50 torch is 244121.
  • The hobart 770496 plasma cutter parts kit including 2pcs electrodes and 2pcs tips, which are compatible with hobart plasma 250ci and hobart plasma 500i plasma cutter machine.
  • Every package including 4pcs airforce 250ci plasma consumables or airforce 500i plasma consumables which are made by WS.
  • All the hobart plasma cutter accessories are Replacement Parts, NOT Hobart Original Consumables.
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 9-0094 9-0096 SL40 Torch Plasma Electrode Tip fit Thermal Dynamics Cutmaster 42/12+ Plasma Cutter SL40 Plasma Torch Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WeldingStop 40pcs SL60 Electrode 9-8215 Tips 9-8211 Nozzle 80A for Thermal Dynamics SL60 SL100 Torch CutMaster 52 82 152 102 Plasma Cutter Consumables

  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 Plasma Cutter SL60 Plasma Cutting.
  • The plasma consumables also can fit Thermal Dynamics CutMaster 102 / 152 Plasma Cutter with SL100 Plasma Torch.
  • ✓For Use With Torch—— These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 20pcs SL60 electrodes 9-8215 and 20pcs SL60 standoff tips 9-8211 80A Nozzle WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 80A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Plasma Torch Electrode Tip Drag Shield for Miller Spectrum 875 Cutter ICE-60T/TM 25pcs

  • 25pcs ICE-60T plasma torch consumables can fit Miller Spectrum 875 plasma cutter machine.
  • CAN NOT fit Spectrum 875 plasma cutter XT60 torch.
  • Plasma electrode x 10pcs, reference code 212724.
  • Plasma tip / nozzle x 10pcs, reference code 219676.
  • Plasma drag shield x 5pcs, reference code 212730.
  • This is ICE-60T plasma cutting torch aftermarket replacement item which manufactured by WS,not original.
Check Stock

WeldingStop Shield Cap 9-8218 for Thermal Dynamic Cutmaster 52/82/102/152 SL60 SL100 Plasma Cutter Torch Consumables PK-1[Black 9-8218 Level Up]

  • The Shield Cap 9-8218 used for Drag cutting.
  • the Standoff Guide 9-8218 need work with Standoff Guide 9-8281.
  • The Shield Cap can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Plasma Shield Cap can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8218 Shield Cap are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock