Inland Tough PLA 3D Printer Filament 1.75 mm – Tougher Than PLA+ - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – High Impact Strength- Black
- TOUGH PLA FILAMENT PRINT SETTINGS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) Recommended Extrusion/Nozzle Temperature: 210 °C - 230 °C (410 °F - 446 °F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND TOUGH PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Tough PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
- EASY-TO-USE: Inland Tough PLA filament is as easy to use as regular PLA, but has higher impact resistance. Tough PLA is engineered for strength and durability and is often compared to ABS for its mechanical characteristics. Produce your best print with our no-clog, bubble-free durable Tough PLA. The Inland filament can be used with most FDM and FFF 3D Printers..
- HIGH-QUALITY TOUGH PLA: The Tough PLA is non-toxic and tightly wound on its cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Alwa....
Check StockJAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent
- 【PLA+ Filament Bundle Multicolor】PLA Plus 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent. 10 rolls of multicolor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
- 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
- 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
- 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
- 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of ....
Check StockATARAXIA ART Flexible PLA Filament, PLA 1.75mm, 3D Printer Filament,1kg/2.2lb, Better Than TPU, 89A Shore Hardness, Patent Formula, Compatible Bowden Extruder, with Filament Storage Bag, PLA Sky Blue
- ☀【Patented Flexible PLA Formula & 89A Shore Hardness】 - Ataraxia Art Flexible PLA plus filament is a patented formula that took years to perfect & release. Flex PLA is more flexible than TPU & easier to use. Flexible Pla elongated at break more than is 500-600 % so Flexy filament can be stretch 5 to 6 times higher more than any 3d printer filaments.3d printer filament Flexible PLA is used for great variety of project like shoe insoles, Arts & Crafts, DIY, phone case, gifts, belt & decoration..
- ☀ [ Wide Pantone Match Colors Option For Flexible Stretch PLA] - Ataraxia art offer Flexible PLA Plus Filament 1.75mm in Auto winding 1kg./2.2lb spool, . Ataraxia FPLA is also available in the following Pantone Matched colors: Red, Black, Yellow, Gold, Violet, White, ivory white, Blue, sky Blue, Green, prusa Orange, Light Brown, Brown, Slate Gray, Pink & chocolate. To match exact color code please refer our Pantone code in our product image..
- ☀ 【 Compatible with Bowden Extruder and Direct Drive 】- Ataraxia Flexible PLA Filament 1.75mm Works with any 3dprinter, regardless of it being direct drive or Bowden extruders. TPU filament 1.75mm on ....
Check StockSUNLU PLA Filament 1.75mm, 3D Printing Filament PLA Refill, Dimensional Accuracy +/- 0.02mm, 1kg (2.2lbs), Spool-Less Filament, Black PLA 1.75
- ① 【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
- ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
- ③【High Compatibility Refill】SUNLU PLA 1.75mm filament refill is compatible with many brands of MasterSpool, MasterSpool is re-usable, a good idea in reducing waste and cost..
- ④【1KG PLA 3D Filament】SUNLU 1KG PLA filament refill only includes 1 roll PLA 3D printer filament 1.75mm refill, no spool(spool-less). Please use with reusable spool(MasterSpool)..
- ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
- ⑥【SUNLU Professional Team】SUNLU is a high-tech enterprise specializing in R&D, production and sales of 3D filament, 3D printer, 3D pen, filament dryer, 3D resin and resin UV light curing box..
Check StockSUNLU 3D Printer Filament PLA Plus 1.75mm, SUNLU Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), Black
- 【5 Rolls of 0.25kg 1.75mm SILK PLA Filament, Multiple Color Choices】5 rolls of 250g SUNLU 1.75mm SILK PLA filament.Color: Brass+Red Copper+Bronze+Green+Pink.The design of 250g SILK PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
- 【 Shiny SILK PLA Filament】Compared to regular PLA 3D printer filament, SUNLU SILK PLA filament has a glossy, smooth silky surface that does not require polishing.The fantastic SILK filament has great colour and shine,making it ideal for printing art and craft.Great SILK PLA filament for any 3D print job.It has a nice silk looking shine on prints..
- 【 Great Easy to Print】Feed smoothly and constantly without clogging the nozzle or extrude.Smooth SUNLU 1.75mm SILK PLA 3D filament(Tolerance Level : ± 0.02mm).1 kg spool (2.2lbs),330m each spool.Minimum tolerance and low warping to ensure consistent feeding and fast prints,say goodbye to clogging..
- 【Neatly Wound Filament】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of SUNLU SILK PLA filament with few knots, avoiding possible breaks..
Check StockPLA 3D Printer Filament 1.75mm, SUNLU PLA Filament 1.75, Dimensional Accuracy +/- 0.02mm, Reusable MasterSpool, PLA 2kg, 1kg Spool, 2 Pack, Black+Transparent
- ①【SUNLU PLA 3D Filament】PLA 3D filament is the most basic, the most used filament, no clog, no bubble, no tangle, SUNLU PLA filament has good layer adhesion, easy to use..
- ②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
- ③【2KG PLA 3D Filament】SUNLU 2KG PLA filament MasterSpool includes 1 reusable spool(MasterSpool) and 2 rolls PLA 3D printer filament 1.75mm refills, '1+2' combination..
- ④【Reusable MasterSpool】SUNLU MasterSpool is reusable, it's compatible with many brands of 3D printing filament refills(spool-less filament), which is a good idea to reduce waste and cost..
- ⑤【Recommend Settings】We recommend print the PLA filament at a nozzle temperature of 215-230°C, bed temperature of 60-80°C, printing speed of 40-80mm/s..
Check StockInland 1.75mm PLA PRO (PLA+) 3D Printer Filament Refill, 1KG (2.2lbs) Spooless Filament, Dimensional Accuracy +/- 0.03mm, Blue Refill for Inland Reusable Spools
- PLA+ FILAMENT REFILL SPECS: 1 KG (approximately 2.20 lbs) Per Refill 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- SPOOLLESS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
- INLAND REFILL FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print. You can expect the same print quality as Inland PLA+ Filament, without the spool!.
- USE LESS PLASTIC WITH PLA PLUS REFILL: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
- EASY-TO-USE: Inland Spooless PLA+ Filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland fi....
Check StockInland PLA PRO (PLA+) 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Natural
- PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- PLA PLUS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND PLA PLUS FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
- EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
- HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, a....
Check StockInland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - White
- PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
- EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
- HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check StockInland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Olive Green
- PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
- EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
- HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check StockInland PLA Plus (PLA+) 3D Printer Filament 1.75mm - PLA Pro Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free 3D Printing Filaments - Black
- PLA PLUS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- PLA PRO FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F), Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND PLA + FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print..
- EASY-TO-USE: Inland PLA+ filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle-free, do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
- HIGH-QUALITY PLA PLUS: PLA+ filament is non-toxic, environment-friendly, and c....
Check StockInland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1 kg Spool 2.2 lbs – Fits Most FDM/FFF Printers – Odor Free Clog Free Filaments - White
- PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C....
- INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure....
- EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor.....
- HIGH-QUALITY PLA: PLA filament is non-toxic and comes with a recyclable spool. PLA is the most cost-effective way to bring your creations to life..
Check StockBOSOKU PLA 3D Printer Filament Matte Black/Blue/Green/Grey PLA Filament 1.75mm Dimensional Accuracy +/-0.02mm, 4 Assorted Colors, 4 Spools
- ✔️【PREMIUM MATERIALS】: 3D printer filament made of 100% new pure Polylactic Acid material, or PLA, is a bio-plastic printing material derived from natural materials, which boasts complete biodegradation and lower melting temperature, eco-friendly and safe, with no odor during the printing.
- ✔️【4 ASSORTED COLORS】: PLA plus filament 1.75 set includes 4 Assorted Colors(4 Spools), Matte Black PLA/ matte Blue PLA/ matte Green PLA /matte Grey PLA, that offer multiple choices for your artistic creation, special colors suitable for printing lampshades, vases, and other design parts.
- ✔️【3D PRINTING TEMPERATURES】: Recommended Printing Temperature of your PLA 3D printer filament: 374 °F to 410°F (190℃~210℃), high precision diameter 1.75mm PLA filament roll with tolerance: +/-0.02mm, that brings maximum smooth performance, no breaks, no bubbles, no clogging during even the most delicate of 3D printer work.
- ✔️【HIGH COMPATIBILITY】: Your 3D printer filament PLA is easy to press and works with the most well-known 3D Printers with PLA filament 1.75mm in the market place for 3D art craft making.
- ✔️【4 COLORS PACK】- 4 Spools,250g Matte PLA filament in one Package, Within 24 Hours Reply, 100% Satisfaction Guarantee, If you're no....
Check Stock