Reviews Pitch Pipes

Pitch Pipe

  • Quality Material of Acoustic Guitar Tuner: The front side of the violin tuner has plated brass with active notes. The reverse side of the vocal pitch....
  • Size of Music Violin Guitar Tuner: The small pitch pipe voice tuners for all instruments has 2.56 inches wide and 0.47 inches height. This acoustic....
  • Brass Reeds: The pitch pipe for guitar acoustic tuner has 13 hand-tuned notes. Each of them tested for pitch accuracy by electronics. The metal....
  • Female Tool: The women singers most often use C-C pipes because it is designed for the high key. This chromatic tuner bass has the range of C-to-C for....
  • Music Tuners: The music pitch changer instrument tuner is suitable for singers, vocalist, сhoir or сhorus, сhurch groups, сhorus ensembles, a....
Check Stock

Husky 10 Digital Level

  • Plumber's Kit straps to brass, copper, PVC, and other non-magnetic pipes and conduits to present a magnetic surface to which Digital Angle Gauges and Levels may be mounted.
  • Two flexible, adjustable length straps connect the metal plate to pipes, conduit, or other objects.
  • Fits common PVC pipe sizes from 1- to 6-Inch outer diameter and can stretch to fit circumferences up to 18-Inch.
  • Attach magnetic side of Digital Angle Gauges and Levels to the metal plate to use the gauge in a hands-free fashion to easily set and measure angles.
  • Metal plate holds Digital Angle Gauges and Levels in place while the desired angle, pitch, or tilt is set or measured.
Check Stock

(20 PCS) 3/8-16 Stainless Steel Serrated Flange Nuts,Flange Lock Nut,by Fullerkreg

  • 【】 Package Content: 60pcs * M8 Hex Flange Nuts.
  • 【】Name: M8 Serrated Hex Flange Lock Nuts.
  • 【】 Mostly used on pipes that are connected or that require additional nut contact surfaces..
Check Stock

prier C-434D08 8\ Self Draining Heavy Duty Wall Hydrant

  • Drains automatically with hose attached and under pressure to prevent pipes from freezing and bursting.
  • downward pitch is built into hydrant, ensuring proper installation.
  • All cast brass construction, solid cast brass seat, body and valve stem cap.
  • solid brass stem ends use large diameter long wearing acme threads.
  • Metal collar covers drainage holes and protects against insect nesting while closing under pressure, multiple vent holes ensure proper draining.
  • Cycle tested to simulate 25 years minimum service.
Check Stock

prier C-434D12 Self Draining Residential Wall Hydrant

  • Drains automatically with hose attached and under pressure to prevent pipes from freezing and bursting.
  • downward pitch is built into hydrant, ensuring proper installation.
  • All cast brass construction, solid cast brass seat, body and valve stem cap.
  • solid brass stem ends use large diameter long wearing acme threads.
  • Satin nickel plated body, valve stem cap and vacuum breaker.
  • compact design handle is positioned to prevent interference between hose and operators hand.
  • Metal collar covers drainage holes and protects against insect nesting while closing under pressure, multiple vent holes ensure proper draining.
  • Cycle tested to simulate 25 years minimum service.
Check Stock

Woodford V22CP-10-MH 10\ Hot/Cold Frostfree Vertical Mount Faucet - 1/2\ MIP or Female Sweat Connection

  • CP inlets are 1/2 inch male pipe thread or 1/2 inch sweat. For use in maximum 10 inch wall thickness. Inlets are 5"apart on center. Overall length of the inlet pipes is 11 3/4" from tip to wall flange..
  • Faucet must be installed with downward pitch toward nozzle.
Check Stock

Garden Connector Adapter 30 Pieces Of Brass Female M22 M24 Male Threaded Connector 5/8\ Faucet Quick Connector For Bathroom Faucet Copper Fittings (Color : 4L/H)

  • Allows connecting and extending pipes or fittings of different sizes.
Check Stock

Garden Connector Adapter 30 Pieces Of Brass Female M22 M24 Male Threaded Connector 5/8\ Faucet Quick Connector For Bathroom Faucet Copper Fittings (Color : Plating silver)

  • Allows connecting and extending pipes or fittings of different sizes.
Check Stock

IPS CORPORATION 86249 Roof Flashing 3-in-1 with Elastomeric Collar, 3 x 12 x 15.4 inches, Steel

  • The roof flashing is compatible with 1-1/4 inch, 1-1/2 inch, 2 inch or 3 inch pipes.
  • Constructed of a durable galvanized steel base to prevent rust and cracking.
  • Features an elastomeric rubber collar that is resistant to ultraviolet, ozone and harsh weather.
  • Designed to direct water away from critical areas on the roof and prevent penetrations.
  • Compatible with any roof pitch up to a 45-degree angle.
  • Fits 1-1/4" or 1-1/2" 2" and 3" vent pipe.
  • Tested for ultraviolet ozone & weather resistance.
  • Galvanized base w/adjustable elastomeric collar.
Check Stock

#5 (4\ - 8\) DEKTITE RED Square Base High Temp Silicone - Flexible Pipe Flashing Boot - Dektite Pipe Flashing (DFE205RE)

  • Flashing Base is 12-1/4" by 12-1/4" - Pipe Boot Fits 4" x 8" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • On a Roof with a 10/12 to 12/12 Pitch Dektite Recommends You Use a Square Base Pipe Flashing Installed With The Base Tip Pointed Towards Roof Top.
Check Stock

uxcell Brass Fitting Connector Metric M10-1 Male to Barb Fit Hose ID 8mm 2pcs

  • One side is used to connect hoses while the other side is used to connect to metric female pipes..
  • The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
Check Stock

HALIGA Brass M12 Threaded Extension Rod for Pendant Light, Island Lighting, Chandeliers,Lighting Fixture downrods & Stems,12 Inches

  • ...sure it fits your product. Suitable Size: Suit for M12 thread. The length of the lamp extension rod is 12 in, the outer diameter is 0.531 in, and the inner diameter is 0.330 in(wires can pass through). The link threaded pipe length is 0.984 in and the outside diameter is 0.456 in(Suit for M12 thread.)and the thread pitch is 1mm . Please refer to the product map2 for more detailed size introduction..
  • Easy to install and splice: The package included 4 rods, and 4 threaded pipes for connection.Splicing according to the required length .Installation by threaded pipes screwing ..
  • The accessory can increase the installation height of the pendant light, chandeliers or island lighting fixtures.Note: This is NOT A LIGHT FIXTURE but an accessory for lighting fixtures.
  • With the tilt ceiling adapter, the pendant light can be installed on the Vaulted or Angled Ceilings. (The ceiling adapter needs to be purchased separately, and it is more favorable to purchase with it). Customer Service: If you have any question about item, please contact us by clicking on "sold by 'Haliga' "and then clicking on 'Ask a question' and telling us what's wrong about item, we will solve all problems for you..
Check Stock

HALIGA Matte Black M12 Threaded Extension Rod for Pendant Light, Island Lighting, Chandeliers,Lighting Fixture downrods & Stems,12 Inches

  • ...sure it fits your product. Suitable Size: Suit for M12 thread. The length of the lamp extension rod is 12 in, the outer diameter is 0.531 in, and the inner diameter is 0.330 in(wires can pass through). The link threaded pipe length is 0.984 in and the outside diameter is 0.456 in(Suit for M12 thread.)and the thread pitch is 1mm . Please refer to the product map2 for more detailed size introduction..
  • Easy to install and splice: The package included 4 rods, and 4 threaded pipes for connection.Splicing according to the required length .Installation by threaded pipes screwing ..
  • The accessory can increase the installation height of the pendant light, chandeliers or island lighting fixtures.Note: This is NOT A LIGHT FIXTURE but an accessory for lighting fixtures.
  • With the tilt ceiling adapter, the pendant light can be installed on the Vaulted or Angled Ceilings. (The ceiling adapter needs to be purchased separately, and it is more favorable to purchase with it). Customer Service: If you have any question about item, please contact us by clicking on "sold by 'Haliga' "and then clicking on 'Ask a question' and telling us what's wrong about item, we will solve all problems for you..
Check Stock