Reviews Pitch Controlled 10kw

Chocolate Melting Pot 110V 40W/80W Chocolate Tempering Melting Machine 2Tanks Electric Chocolate Heater Melting Warming Fondue Machine for Chocolate Candy Butter Cheese 86-185℉ 2 pots

  • ✪ POWERFUL & EFFICIENT: Chocolate tempering is efficient and takes from 10 to 20 mins with this manually controlled stainless steel melting machine..
  • ✪ GOOD CAPACITY: With 4.5 lb (1.2 kg) max./tank you will rarely find better value for the money. The 1KW powered melter is crafted from stainless....
  • ✪ PREMIUM ORIGINAL DESIGN: Fine craftsmanship and small volume make the manual choco melter very convenient for use. Its high-cost performance makes....
  • ✪ MANUALLY CONTROLLED: The chocolate melting machine is manually controlled by power on/off and temperature adjusting knob..
  • ✪ 100% GUARANTEED QUALITY: Great support with a flexible refund policy..
Check Stock

Farmertec Holzfforma G660 MS660 Includes 36 inch Bar and Chain 2-4 DAY Delivery

  • With 36 Inch Guide Bar and Chain.Starter/Crankcase/Sprocket Cover as shown in the picture, make your work easier and safer..
  • Type: G660 Power head. Displacement: 92CC / Power: 5.2KW.
  • Guide Bar Type: Sprocket nose Chain Type: 3/8" , .063" Chain Sprocket: Standard 7 tooth 3/8" pitch.
  • It is with luxury handle bar. It takes about 10-15 working days for you to get it..
  • If you have any problem or confusion after getting your item, please contact us firstly..
Check Stock

Generac Air Filter 0G5894 and UGP Replacement Oil Filter Sets for Generac 070185E and 070185ES (Air and Oil)

  • Replaces for generac oil filter 070185E 070185ES 070185B 070185D 070185F.
  • The 90mm oil filters have 30% additional capacity compared to the standard 75mm filter.
  • Fits for all 10kW 12kW 13kW 15kW 16kW 17kW 18kW 20kW air cooled Generac Centurion, Siemens, Eaton standby generators post 2008.
  • Fits for all Generac generator units up to 22 Kw, fits for all 10 - 17.5 KW Generac portable generators XP, XG, Ultra Source series.
Check Stock

Holzfforma 92CC G660 Gasoline Chain Saw Chainsaw Blue Thunder with 84DL 3/8\ .063\ 25 Inch Guide Bar and Saw Chain

  • With Guide Bar and Chain. Starter/Crankcase/Sprocket Cover as shown in the picture, make your work easier and safer..
  • Type: G660 Power head. Displacement: 92CC / Power: 5.2KW.
  • Guide Bar Type: Sprocket nose Chain Type: 3/8" , .063" Chain Sprocket: Standard 7 tooth 3/8" pitch.
  • It is with luxury handle bar. It takes about 10-15 working days for you to get it..
  • If you have any problem or confusion after getting your item, please contact us firstly..
Check Stock

92CC G660 Holzfforma Gasoline Chain Saw Chainsaw with 28 Inch 92DL 3/8 .063 Guide Bar and Saw Chain Tank Protective Guard

  • With 28 Inch Guide Bar and Chain.Starter/Crankcase/Sprocket Cover as shown in the picture, make your work easier and safer..
  • Type: G660 Power head. Displacement: 92CC / Power: 5.2KW.
  • Guide Bar Type: Sprocket nose Chain Type: 3/8" , .063" Chain Sprocket: Standard 7 tooth 3/8" pitch.
  • It is with luxury handle bar. It takes about 10-15 working days for you to get it..
  • If you have any problem or confusion after getting your item, please contact us firstly..
Check Stock

92CC G660 Holzfforma Gasoline Chain Saw Chainsaw with 25 Inch 84DL 3/8 .063 Guide Bar and Saw Chain Tank Protective Guard

  • With 25 Inch Guide Bar and Chain.Starter/Crankcase/Sprocket Cover as shown in the picture, make your work easier and safer..
  • Type: G660 Power head. Displacement: 92CC / Power: 5.2KW.
  • Guide Bar Type: Sprocket nose Chain Type: 3/8" , .063" Chain Sprocket: Standard 7 tooth 3/8" pitch.
  • It is with luxury handle bar. It takes about 10-15 working days for you to get it..
  • If you have any problem or confusion after getting your item, please contact us firstly..
Check Stock

71cc G372XP Holzfforma 50mm Bore Gasoline Chain Saw Power Head All Parts are Compatible with Husqvarna 372XP Chainsaw Wrap Handle Bar

  • With Guide Bar and Chain. Starter/Crankcase/Sprocket Cover as shown in the picture, make your work easier and safer..
  • Type: G660 Power head. Displacement: 92CC / Power: 5.2KW.
  • Guide Bar Type: Sprocket nose Chain Type: 3/8" , .063" Chain Sprocket: Standard 7 tooth 3/8" pitch.
  • It is with luxury handle bar. It takes about 10-15 working days for you to get it..
  • If you have any problem or confusion after getting your item, please contact us firstly..
Check Stock

Black Diamond Equipment - ATC-Pilot - Black

  • Provides an added level of security to single pitch belays.
Check Stock

Remo Drum Set, 24-inch (PM1824MP)

  • Combines the highly successful power maximum pre-muffled marching Bass Drumhead with Remo's newest black suede technology.
  • 10-Mil ebony film treated with Remo's legendary suede process.
  • Free-floating internal muffling ring to focus attack, pitch and lower frequencies.
  • 7. 5-Mil dampening underlay and a CTS Dot applied underneath for added strength.
  • The ultimate in controlled articulation and sustain, with a powerful, contemporary appearance.
Check Stock

IRWIN Tools Universal Handsaw, 15-Inch (1773465) , Blue

  • Featuring triple-ground teeth, this handsaw cuts up to 3 times faster than traditional handsaws.
  • This handsaw utilizes a universal tooth grind to remove material quickly.
  • A tapered-pitch nose improves clearance and adds stability.
  • The thick-body handsaw blade incorporates a water-based lacquer coating to help deliver fast, controlled cuts.
  • A comfort grip is made from high-density resin and molded into an ergonomic shape for less hand fatigue.
Check Stock

Parts 2Pk 070185BS Oil Filter Compatible With Generac 070185B, 070185D, 070185DS, 070185, 70185

  • Generac 0G5894 Guardian Air Filter for 20kW (999cc) Engines (Pre 2013) Replacement OEM Generac Filter Fits all Generac V-Twin 20kW 999 cc engines (pre 2013).
  • Compatible with 20kW (2008-2012) air-cooled Generac, Guardian, Centurion, Watchdog, Eaton, Honeywell, and Siemens generators. See full description for model #'s.
  • Generac Genuine Oil Filter 90 LOGO Part # 070185E. The 90mm oil filters have 30% additional capacity compared to the standard 75mm filter..
  • These OEM oil filters will fit most of the Generac engines used on Generac generators and other manufacturers equipment post 2008. FITS ALL: 10, 12, 13, 15, 16, 17, 18, & 20kW air cooled Generac, Centurion, Siemens, & Eaton standby generators. FITS ALL: 10 - 17.5 KW Generac XP, XG, & Ultra Source series portable generators..
Check Stock

MYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump

  • ✅ Package include: ①1 x 1.5KW 110V Spindle Motor ②1 x 1.5KW 110V VFD ③1 x 75W 110V Water Pump ④1 x 196 in Water Pipes ⑤1 x 2.6 in Spindle Motor Mount ⑥1x40 in Electric Wire ⑦10 x Drill Bits ⑧1 x2.8 in Brushes ⑨13 x ER11 Collet(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm).
  • ✅1.5KW Spindle Motor：Technical Parameters:φ1.16 x 10.5in (Diameter: 2.95cm x Length: 26.7 cm).
  • Weight: 7.05 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter..
  • Output Current: 5A. The machine is screwed to ensure the safety and reliability of the use. DC cooling fan low noise, large air volume.The converter has overload protection, overvoltage protection overheat protection etc..
  • ✅75W 110V Water Pump：Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performan....
Check Stock

Incoloy 800 Universal Flo-Thru Heater Element

  • This Universal Heater Element is rated 5.5Kw or 5500W, 220V, Incoloy 800 Metal (Non-Catted).
  • For 110V application the 5.5 kW heater element outputs 1.375 kW (5.5 kW = 18766 BTU).
  • Dimension (approx.): 10 inches long x 1.37 inches across, and normally used in a 15 inch long flo-thru heater.
Check Stock