Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)
- 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
- 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
- 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
- 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
- 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
- it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check StockOBPSFY 5PCS BSP Pipe Tap Set,Bearing Steel Threading Taps Tool for clean/re-thread damaged/Jam Pipe threads(1/8\
- * Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.5 Different Sizes ,great for tapping various threads, meet your different needs..
- * BSP Pipe taps are used to cut new threads or repair damaged threads / jam pipe threads and have excellent results,it is the best choice for your toolbox..
- * In accordance with National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8.
Check StockNPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material
- High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
- 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
- Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stockuxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End
- Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
- the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
- 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
- Nominal size of the tap is that of the pipe fitting being tapped..
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
- Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check StockPony Tools 50 3/4in. 6 Pack Ajustable Clamp Fixture for Black Pipe
- Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
- Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
- Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
- Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
- Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check StockPony Tools 52 6 Pack 1/2in. Ajustable Clamp Fixture for Black Pipe
- Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
- Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
- Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
- Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
- Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check StockRotary Breather Tube Set Fits B&S 692187 & 692189
- ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT1..
- ✅ Unlike traditional thread repair tools that come in standard sizes, the RT1 is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
- ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
- ✅ Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RT1 has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
- ✅ Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check StockTECHTONGDA Electric Pipe Threader Threading Machine Threading Cutter 110V with 1/2\-2\ Capacity for Installing and Building Industries
- This power pipe threading machine features industrial-quality threading. It threads,cuts, and reams water, electric, and gas pipes. It can accommodate 1/2"-2" pipe threads..
- The through-head oiling. System facilitates movement and allows for longer work sessions..
- Besides having dexterous and compact structure,artistic appearance,simple operation and high efficiency, it is characterized by an automatic profiling device ,a dependable clamping apparatus and a distinctive oilling system..
- If adopting the threader,you would assure to prolong the life of dies,protect the pipe from deformation and slipping,and obtain a high quality standard taper pipe thread..
- It is an ideal machine for raising efficiency ,ensuring quality of projects and reducing labour intensity in pipe installation. It has been widely applied in installing and building industries..
Check StockTECHTONGDA Electric Pipe Threader Threading Machine Threading Cutter 110V with 1/2\-3\ Capacity for Installing and Building Industries
- This power pipe threading machine features industrial-quality threading. It threads,cuts, and reams water, electric, and gas pipes. It can accommodate 1/2"-3" pipe threads..
- The through-head oiling. System facilitates movement and allows for longer work sessions..
- Besides having dexterous and compact structure,artistic appearance,simple operation and high efficiency, it is characterized by an automatic profiling device ,a dependable clamping apparatus and a distinctive oilling system..
- If adopting the threader,you would assure to prolong the life of dies,protect the pipe from deformation and slipping,and obtain a high quality standard taper pipe thread..
- It is an ideal machine for raising efficiency ,ensuring quality of projects and reducing labour intensity in pipe installation. It has been widely applied in installing and building industries..
Check StockRatchet Pipe Threader Kit, Ratcheting Pipe Threading Tool Set with 4 Dies 1/2\ 3/4\ 1\ 1-1/4\
- 【High quality】 The hinged plate head of the ratchet pipe threader kit is made of high-quality, high-hardness, heavy-duty material malleable cast iron, which is durable and wear-resistant, and has a long service life. The thread of the plate head is neat, not easy to slip, and the cut is smooth..
- 【Ergonomic design】 The longer handle provides a better feel and maximum torque, while also cutting threads when threading. The forward/reverse selection is clear and the ratchet set fits perfectly to the cutter without falling.
- 【Application】 This ratchet pipe threader kit is suitable for repairing damaged threads or new threads on pipelines, such as steel pipes, galvanized pipes, iron pipes, plastic pipes, etc., which is an ideal choice for construction, pipeline and equipment installation industries, simplifying threading work, improving work efficiency and saving labor costs.
- 【Product Packaging】 Pipe threader kit includes 4 hinged plate heads in sizes 1/2.
Check StockOmninmo NPT Pipe Tap Set Thread Forming Taps High Speed Steel Drill Bits Thread Tap Attack Pipe Plate Hand Tapping for Cleaning or Re-thread Damaged or Jam Pipe Threads Size G3/4 55 Degrees
- High Strength Material: Omninmo pipe tap set is different from the traditional carbon steel material. Our pipe taps is made of composite steel material, which is more durable and Higher hardness..
- Professional Cutting Tools: Right-Hand cut tools have a cutting action that engages when they are run in a clockwise direction.Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
- Convenient and Durable: Uncoated tools feature just the base substrate without any additional treatment or coatings,Carbon steel pipe taps are designed to clean or rethread to damage or block pipe threads,cuts internal threads in pipes..
- Universal size: Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). The size is 3/4.Omninmo NPT Thread Forming Taps is ideal for pipe fittings..
- Product Guarantee: If you have any questions, Please contact us in time, We will reply to you immediately to solve your problem..
Check StockRESTEK 20250 Compact Ferrule for Agilent Gas Chromatography, Graphite, Fit =0.28 mm ID (Pack of 10)
- Coupling pipe fitting for connecting and extending pipes.
- Female National Pipe Taper (NPT) threads on both ends for connecting male pipes.
- Made from stainless steel 316 for strength.
- Higher corrosion resistance than stainless steel 304.
- NPT thread for compatibility with other threads.
Check Stock