Reviews Pipe Thread Adapter

LASCO 15-1701 3/4-Inch Female Garden Hose by 1/2-Inch Male Pipe Thread Brass Adapter

  • 3/4-Inch female hose thread by 1/2-Inch male pipe thread.
  • Used for adapting a garden hose to a pipe thread.
  • Not for use in potable drinking water applications.
  • 3/4 inch female garden hose thread x 1/2 inch male pipe thread.
Check Stock

Apache 98441022 1/4\ Quick Disconnect Pressure Washer Adapter Set

  • Includes: 1/4" Quick Disconnect Plug x 1/4" Male Pipe Thread Adapter, 1/4" Quick Disconnect Socket x 1/4" Female Pipe Thread Adapter.
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

only fire 12 Ft 3/4' ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Grill,Generator,Patio Heater,Pizza Oven,etc

  • Hose Connection: 3/4" Male quick discount plug x 3/4" Male pipe swivel.
  • Quick Connector: 3/4" quick connect x 3/4" Female pipe thread.
  • 12FT gas hose , outside 100% solid brass and rubber fittings, long-lasting and sturdy. Provides secure, tight connection between grill or fire pit and tank.
  • Functions effectively with natural or liquid propane gas. Unites LP grills, natural gas grills and RVs to permanent fuel sources.
  • Use for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
Check Stock

LASCO 08-1061 Four in One Bathtub Spout Adapter Slip Fit for Copper

  • Use in 1/2-Inch copper pipe, 1/2-Inch and 3/4-Inch pipe thread.
Check Stock

275-330 Gallon Tote Water Tank Adapter 2' Coarse Thread Brass Hose Faucet Valve Garden Hose Connector Replacement IBC Tote Valve Fitting Parts

  • 【Premium Material】The Tank Adapter made of high quality Brass and PP, which is not easy to damage, durable to use. Anti-corrosion, anti-acid and anti-alkaline, has a long service life..
  • 【Specifications】S60X6 2” Coarse Thread IBC Tank Adapter, which converts a 2 inch coarse thread valve into a Brass Garden Hose Ball Valve Faucet 3/4” Ring Connector. Your tank drain outside diameter is actually 60mm or 2.36″, and with coarse thread pitch is 6mm (0.24″)-Most Common Thread Found On European IBC’s. Not American National Standard Straight Pipe Thread. So pls check carefully your IBC tote valve thread is coarse thread before purchasing. Thanks for your cooperation!.
  • 【Widely Applications】This water tank faucet adapter is widely used in garden irrigation, home, industrial irrigation and other scenes. It fits most standard European IBC containers. Can be used as a quick contact switch for IBC tank adapter with coarse thread, this is a great way to stop beating your knuckles on the cage of the Tank. And it also preserves the Life of Your Existing Valve..
  • 【Easy to Install & Use】Safe for using. Fit for IBC tank vavle. The ibc tote garden hose adapter switch is made of high-quality and non-slip plastic, can be shut off quickly by rotate 90 d....
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

lifeegrn Misting System Calcium Inhibitor Filter, RV Water Filter with Hose Protector, Garden and Camper Water Mister Filter, White(2 Pcs)

  • Unique design - Each order comes with 2pcs winterize blowout adapter and 4pcs pressure washers. We designed this winterize adapter for preventing freezing of garden water pipes, sprinkler systems, faucets and travelling vehicles water lines such as RV/camper/boat/travel trailer which with water supply system, by blowing out water from water lines/plumbing or pipes. Very easy and convenient anti-freezing method to use and help to reduce the use of antifreeze..
  • Universal threaded connection - Our winterize blowout adapter is standard threaded connection in most cases. Designed with a 1/4 inch male air compressor quick plug to a male 3/4 inch garden hose inner thread. Easy attach air line to water lines or hose system to make a nice winterization solution..
  • High quality product - The winterize blowout adapter is made of brass, strong ruggedness and good durability, very safe to use and not easy to break or deform, can serve you longer time.
  • Easy to use - Screw the water pipe to the female thread side and connect the quick plug to the quick coupling inside the air compressor line, then turn on the air compressor and turn around the ball stem to open or close and adjust the air flow rate to blow dry water from the water pipe..
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Gsinodrs 3PCS Brass Pipe Fitting 1/2 Female NPT Thread x 1/2 Male NPT Thread Brass Hex Pipe Fittings Adaptor 1200psi High Pressure

  • 【Metal Adapter】Our pipe fitting solid brass constructed, strong and wear resistant more durable than iron and iron galvanized pipe fittings. 3PCS-....
  • 【Durable and Steady】Heavy duty brass pipe fitting construction has excellent performance in terms of corrosion resistance, high temperature....
  • 【Widely Application】Adapter for connecting pipes or fittings of different thread types, brass is corrosion resistant and can be used in wet....
  • 【Temperature Rating】Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to....
  • 【Reliable Quality】The pipe fittingadapter can widely used in your life. 24 months warranty for the adapter, any issue, please contact us..
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

Certified Appliance Accessories CERT77300 Universal Gas Line Connector Kit, 4 Feet, gray

  • 4ft heavy-duty stainless steel connector with 5/8” MIP (Male Iron Pipe) x 5/8” MIP on each end.
  • Two 5/8" OD (Outer Diameter) flare x 1/2" MIP tapped with 3/8" FIP (Female Iron Pipe) adapters.
  • 5/8" OD flare x 3/4" MIP tapped with 1/2" FIP adapter.
  • Supplies up to 106,000 BTU (British Thermal Unit)/hour.
  • Includes one 4-Feet heavy-duty stainless steel connector, one 5/8-Inch od flare x 1/2-Inch m.i.p. (tapped with 3/8-Inch f.i.p.) adapter.
Check Stock

Ultimate Washer High Pressure 22MM Adapter Fitting x 3/8-Inch Brass Male Pipe Thread 5800 PSI Rating Compatible for Troybuilt Excell Devilbis Lasco 60-1057 Models

  • Withstands pressures up to 5800 PSI, 300 degrees.
Check Stock