Reviews Pipe Swage

Swage It® S650C Primer Pocket Swager V2 - Large & Small Primer Combo - for The Dillon XL650

  • Use your case feeder and swage over 1000 rounds per hour..
  • Engineered to properly swage on the Dillon XL650..
  • Our swager actually re-sizes the primer pocket and adds the correct fillet..
  • No need to remove the rotary primer disk which means that you can swage in a matter of minutes without the need of time consuming disassembly of the primer system..
  • The easiest setup available to Swage on your Dillon XL650!.
Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

  • 【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
  • 【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
  • 【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
  • 【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
  • 【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....
Check Stock

Hilmor 1839022 Swage Expander Head - 1-1/8 HVAC Swage Tool and Pipe Bender Accessory

  • SWAGE EXPANDER HEAD: A variety of heads available to make a picture-perfect swage.
  • CORRECT SIZING: Find the size that works for you. Expander heads range from 3/8" to 1-5/8".
  • COMPATIBLE: Use with hilmor's Compact Swage Tool and Pocket Size Deburring Tool.
  • VERSATILE: For use with soft metals - Copper, Steel, Aluminum, Brass tubes.
Check Stock

Saipe 5 Pcs Swaging Tool Drill Bit Set 1/4 Inch Hex Shank Copper Pipe Flaring Tool Tube Expander Air Conditioner Copper Pipe Swaging Flaring Tool for Copper Tubing 1/4 3/8 1/2 5/8 3/4

  • 【Swage Drill Bit Set】Size: 1/4'' (6.35mm), 3/8'' (9.5mm), 1/2'' (12.7mm), 5/8'' (15.9mm), 3/4'' (19mm). Total Length: 50/54/57/60/63mm. Shank....
  • 【Tube Expander】Suitable for【Tube Expander】Suitable for hard and soft copper standardized, easy to braze swaging set. Come with 5 different....
  • 【Durable For Use】Made of high quality bearing steel for high and uniform hardness and wear resistance. High elastic limit for good performance and....
  • 【Swaging Tool】When installing the air conditioner, use a pipe expander to widen the copper pipe, so that the two copper pipes can be accurately....
  • 【Easy to Use】Just need to install it on the electric hand drill to use. Flaring tool drill bit set are small in size, so you can take it with you....
Check Stock

Swage It® S750C Primer Pocket Swager for Large and Small Primers - for The Dillon 750, XL750, XL-750

  • This will remove the crimp in the primer pocket that is common in military brass. This will mount to your press and if you use a case feeder you can swage over 1000 rounds / hour!.
  • Engineered to properly swage on the Dillon 750, XL750.
  • Our swager actually re-sizes the primer pocket and adds the correct fillet..
  • The easiest setup available to Swage on your Dillon XL50!7.
Check Stock

Hilmor 1839015 Compact Swage Tool Kit - HVAC Tools and Equipment, Black

  • SWAGING TOOL: Combination of power and control makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 1-5/8″ tubing to 5/16″ without a crack. Includes a deburring tool, designed to remove sharp edges and burrs.
  • SINGLE HAND OPERATION: One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Propietary pistol design, combined with a weight of only 8.5 lbs, reduces user fatigue.
  • TO USE: Select the correct head, place it on the tool and make a quality swage. Simply press release trigger for easy tube release, ensuring no metal damage.
  • EXTREMELY VERSATILE: The pistol shape design means it can fit in the small, hard to reach areas.
  • INCLUDES: Swage body, deburrer, kit box, and 5 expander heads (3/8″, 1/2″, 5/8″, 3/4″, 7/8″).
Check Stock

VOTOER Hydraulic Tube Expander Tool 7 Lever HVAC Swaging Kit 3/8 to 1-1/8inch Copper Tube Expander Tool with Tube Cutter and Deburring Tool

  • [Multi size]: 6 different sizes HVAC swaging tool drill bit set makes it easier to expand copper pipes when installing repairing the air conditioner or HVAC systems..
  • [Material] : HVAC tools is made of bearing steel, durable, not easy to break, wear-resistant.and high elastic limit..
  • [Function] : A full range of forging tools makes it easy, air conditioning installation, open copper tube, so that two copper tube mutual link.(Please wear safety protection measures)..
  • [More efficient in combination] : Manual copper pipe swage tool needs to be used with electric tools such as hand drills and bench drills. Speed should not be too fast..
Check Stock

Dillon Precision 21079 XL 650 Casefeeder Small Pistol 110v SM Plate 21073 97074

  • The Super Swage 600 comes with: Large and small swage rods, .22 and .30 caliber backup rods, A 45ACP adapter..
Check Stock

Rectorseal 87011 Pro-Fit Precision Swaging Kit

  • Stopper ensures a consistent length of the flare/Swage surface.
  • Tip guides the bit into the tube & forms a standard 45° flare or consistent Swage.
  • Standard 1/4" hex shank fits directly into most power tools without adapter.
Check Stock

LORESO Brake Line Flaring Tool Kit with Swaging Tool Set for 45° Single Flares on Copper Aluminum Brass and Soft Steel Lines Professional Repair and Replacement

  • Professional Flaring and Swaging Tool Kit – A full-service brake line kit with swage tool and other essential accessories this brake line repair kit....
  • Versatile Equipment Compatibility – Our brake line and swage tool kit can be used in copper, aluminum, brass, magnesium, and soft steel lines to....
  • Expanded Sizes to Suit Every Job – This 45° flaring and swaging kit with cones, bars, fittings, tube cutter, and ratchet wrench features sizes....
  • Compact, Portable Storage Case – Each flaring and swage tool set comes with a heavy-duty storage organizer to make it easier to use in a....
  • Trusted Quality, Durability, and Resilience – Here at LORESO we make tools that support rugged jobs and precision craftsmanship which is why every....
Check Stock

Super Stars Hydraulic Copper Pipe Expander Tube Expander HVAC Swaging Tool Kit, with Tube Cutter, Deburring Tool and 7 Expander Heads for 3/8 to 1-1/8 Inches Copper Pipes

  • 【SWAGING TOOL】The hand-held high pressure hydraulic pump generates enough power makes this ideal for HVAC/R instillation, maintenance, and repairs. Can swage 3/8" tubing to 1-1/8" without a crack. Includes a deburring tool, designed to remove sharp edges and burrs.
  • 【SINGLE HAND OPERATION】One handed setup made possible by an innovative hydraulic mechanism and release button. Convenient and comfortable design. Proprietary pistol design reduces user fatigue.
  • 【HOW TO USE】Select the correct head, place it on the tool and make a quality swage. Simply press release trigger for easy tube release, ensuring no metal damage.
  • 【ENHANCE A QUALITY JOB】Eliminates couplings, reduces brazing and number of joints.
  • Suitable for Copper, aluminum and soft steel tubing using hydraulic power.
  • 【PACKAGE INCLUDES】1x Swage body, 1x deburrer, 1x kit box, 7x expander heads (3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8").
Check Stock

Mastercool 71600-A Blue Hydra-Swage Tube Expander Kit,Black

  • DO NOT ACCEPT IMITATIONS: This is the original Hydra-Swage.
  • FABRICATES AND EXPANDS: Copper, aluminum and soft steel tubing using hydraulic power.
  • HAND-HELD HYDAULIC PUMP: Create perfect swages on the job while generating the power necessary to expand tubing up to 1 1/8”.
  • ENHANCE A QUALITY JOB: Eliminates couplings, reduces brazing and number of joints.
  • COMPLETE KIT: Consists of expander heads 3/8, ½, 5/8, ¾, 7/8, 1 and 1 1/8”, hydra-swage, adapter and inner-outer reamer.
Check Stock

Wostore Flaring Tool Kit for Copper Pipe HVAC

  • The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings and 1 storage case..
  • Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D.tubing..
  • Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring tool, swaging tool kit.
  • Versatile tool kit in a combination tubing flaring and swaging to fit all your needs..
  • This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy operation and precision. Plastic....
Check Stock