Cherne 270229 End of Pipe Gripper Mechanical Plug 2"
- Easy to install with extra-large wing nut.
- Inside of pipe seals inside pipe as far as needed.
Check StockRectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant
- RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
- Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
- Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
- Ideal for application with a wide variety of fluids and gases including potable water applications.
- Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Check StockDEKTITE #9 (DFE109B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing (for OD Pipe Sizes 9\ - 20\)
- Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
- This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
- Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
- Black (EPDM) Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 9” to 20” Pipe OD..
- Black (EPDM) Dektite SQUARE Standard Flexible Pipe Boot Flashing. Base is 26-3/4" X 26-3/4".
Check StockDEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4\ - 3\)
- Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
- This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
- Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
- EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
- Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".
Check StockFrost King FV30 Foam and Foil Pipe Insulation, 2\x l/8\x 30ft, Silver
- Frost King 2" x 30' Self-Adhesive Insulated Foam Pipe Wrap - Use On Hot Or Cold Pipes - Foil-Backed Shell Reflects Heat And Seals Out Moisture And Air - Mfg #FV30..
- Self adhesive, Foam and foil, Pipe and duct insulation, Insulation tape..
- Manufacturer Name: Thermwell Products Co. ,.
Check StockWEHOPE 34117 Waste Ball fit for Style II, Style Lite, Style Plus Toilet Replace for Thetford
- Replacement of the Waste ball kit, can replace the broken waste ball.
- Waste ball kit contains waste balls, waste ball seals, U-cup seals, closet flange seals.
- Fit for Style II, Style Lite, Style Plus toilet.
- Please close and empty the water pipe and toilet before installation.
- Installing the seal requires removing the toilet from the base.
Check StockSuper Rod SR-LM Leak Mate by Super Rod
- Reusable temporary seal for pipe work that seals completely around the pipe in seconds.
- Allows for little disruption and no need for emergency call outs.
Check StockWatts 2\ Bronze Heavy Duty Float Valve Assembly, 2000
- Bronze body construction includes machine flange on the inlet side..
- Features a 2 inch female NPT pipe threaded inlet connection..
- Features male straight-pipe threaded outlet connection for locknut..
- Serrated arms for easy adjustment of water level..
- Includes bronze long and short arms, replaceable seals, and no-jam single level action..
Check StockSharkBite 12 Inch Frost Free Sillcock, 1/2 x 3/4 Inch MHT, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24636LF
- Frost King 2" x 30' Self-Adhesive Insulated Foam Pipe Wrap - Use On Hot Or Cold Pipes - Foil-Backed Shell Reflects Heat And Seals Out Moisture And Air - Mfg #FV30..
- Self adhesive, Foam and foil, Pipe and duct insulation, Insulation tape..
- Manufacturer Name: Thermwell Products Co. ,.
Check StockHarbor Freight Tools 61377 HFT 1123 Plumber's Teflon Thread Seal Tape, 10 Rolls Per Box
- No need to use sticky, messy pipe "dope" when you're remodeling or making plumbing repairs.
Check StockDEKTITE #1 DF101G Gray EPDM Flexible Round Pipe Flashing Dektite fits OD Pipe Sizes 1/4 - 2-1/2 - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing - Deks Dektite
- Flashing Base Diameter is 4-3/4", Pipe Boot Fits From 1/4" to 2-1/2" Outside Pipe Diameter.
- Continuous Service Temperature Ranges of -58F to 239F (EPDM).
- Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors.
- Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
- EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease.
Check StockProkomon Exhaust Pipe Stretcher Kit 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Tool for Tail Pipe Tube
- ◇ Heavy Duty Construction : All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
- ◇ The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders..
- ◇ Wide Expandinig Range : The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1- 5/8" to 1-7/8" Collet ,Steel expander 2" to 2-1/2" Collet ,2-3/8" to 2-3/4" Collet ,2-3/4" to 3-1/8" Collet ,3-1/8" to 3-1/2" Collet ,3-1/2" to 3-7/8" Collet ,3-7/8" to 4-1/4" Collet.
- ◇ Portable exhaust pipe expander tool, easy to use, suitable for most cars..
- ◇ Used for expanding mild steel exhaust pipes to make perfect exhaust seals with smaller diameter piping..
Check StockWestbrass 2\ Sch 40 PVC Shower Drains with 4-1/4\ Square Cover, Polished Chrome, D206PS-26
- Makes tile installations faster and easier.
- Square solid brass grate pushes into base.
- Solid brass cast base seals perfectly on 2 in. pipe.
- Included Key tightens swedge lock seal to grasp pipe without leaking.
- Do not use plumber's putty for installation use silicone seal.
Check Stock