Reviews Pipe Screw Clamps

25 Pack Stainless Steel Hose Clamps, 1/4 inch to 1/2 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 1/4 - 1/2 inch (6-12mm), ideal as 1/4 inch pipe clamps, 3/8 inch tube clamps, 1/2 inch screw clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 1/2 to 1/4 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock

PEROMI 4 Pack 304 Stainless Steel T-Bolt Hose Clamps, Working Range 17mm-19mm for 3/4 Inch Hose ID, Heavy Duty Hose Clamps

  • [ABOUT SIZE] Turbo pipe clamps adjustable range 17-19mm(0.67-0.75”), thickness: 0.6mm(0.024”), band width: 18mm(0.7”), screw: M5 x 40mm. Please measure the outside diameter of the pipe before purchase our pipe clamp..
  • [HIGH QUALITY MATTERIAL] T-bolt hose clamp(including the band, housing and screw) is made of 304 stainless steel with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [EASY TO INSTALL] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [WIDE APPLICATION] T-bolt clamps can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
  • [UNIQUE DESIGN] Folding turn edging process of the band, these clamps prevent the sharp edges from cutting the pipeline, can protect your tubes better..
Check Stock

25 Pack Stainless Steel Hose Clamps, 3/4 inch to 1-1/8 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 3/4 - 1-1/8 inch (19-29mm), ideal as 3/4 inch pipe clamps, 1 inch hose clamps, 1-1/8 inch metal clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 3/4 to 1-1/8 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock

Glarks 15Pcs 52-76mm/2- 3inch Range 304 Stainless Steel Adjustable Worm Gear Hose Clamps for Fuel Line Clamp for Water Pipe, Plumbing, Automotive and Mechanical (52-76mm)

  • ★【Hose Clamp Size:】 Our product includes 15Pcs 52-76mm hose clamps, they are packed in a sturdy plastic box will not damaged and loss..
  • ★【Durable Quality:】 All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ★【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • ★【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
  • ★【Function and Use:】These clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply for automotive, industrial, marine, shield, household etc..
Check Stock

Glarks 120Pcs 304 Stainless Steel Hose Clamps Assortment Kit Adjustable 8-44mm Range Worm Gear Hose Clamps Fuel Line Clamp for Water Pipe Plumbing Automotive and Mechanical Application

  • ★【Wide Hose Clamp Size:】 In this hose clamps set, it include 120pcs 8-44mm range clamps which are 25pcs 8-12mm, 20pcs 10-16mm, 20pcs 13-19mm, 15pcs 16-25mm, 10pcs 19-29mm, 10pcs 18-32mm, 10pcs 21-38mm, 10pcs 21-44mm total 100pcs packed in a plastic box, easy to storage and carry..
  • ★【Durable Quality:】 All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ★【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • ★【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
  • ★【Function and Use:】These clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply for automotive, industrial, marine, shield, househ....
Check Stock

Hose Clamps, Stainless Steel Hose Clamp for 1/2 Inch to 1 Inch Hose Pipe Adjustable Worm Gear Hose Clamps Assortment for Automotive Plumbing, Fuel Line, Mechanical Application, 10 Pcs Hose Clamp Set

  • Sturdy & Durable --- Stainless Steel Hose Clamps made of 0.5mm thickness 304 stainless steel (including band, housing and screw). Hose clamp set have the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Pipe Clamp are reliable strong reusable and durable for long-term use..
  • Adjustable Hose Clamps --- The Worm drive Hose clamps are high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/2 inch to 1 inch (14mm-27mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc...
  • Easy To Install --- Hose clamp large has pre-assemble hose clamp fasteners, with through hole process design and slotted holes, steel belt through hole, tight locking and strong torsion force. Hose clips installation just need to use the hose clamp driver to loosen the screw(6mm Flat Head) of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are perfectly suitable for home, industrial, gardening, mechanical, electronic, boat, marine and more. Hose clamps metal are perfect for automotive, seal hoses, water pipe....
Check Stock

OhLectric OL-38707 High-Conductivity Ground Pipe Clamp - Made of Copper Alloy - Connecting Grounding Electrodes to Water Pipes Clamp - Non-Direct Burial Pipe Clamp - ½ Inch - 1 inch Pipe Range

  • TOP QUALITY: Constructed using premium quality copper alloy, these copper ground clamps are extremely durable with high strength and are built to last for a lifetime. Our pipe clamps are designed to fit and organize in a safe manner with the maximum flexibility to suit your needs!.
  • MULTIPURPOSE: These pipe ground clamps are an excellent choice for either clamping the pipes to the grounding electrode or you can even use these clamps to securely mount the pipes on walls. It can also be used for connecting bare wires to pipes or steel water pipe or tubing..
  • CORROSION FREE: The ground clamp for pipe can be attached to the grounding electrode and the pipe by the means of indirect burial with the screws provided. To prevent rusting, the screws are coated with zinc plated steel alloys which totally eliminates the chances of corrosion on the clamps..
  • SAFETY TESTED: All our products are certified by Culus for their safety and specification standards set by them. We follow every step to ensure all the housing rules and regulations are followed as we value customer satisfaction and safety more than anything else..
  • ADAPTABLE FIT: These pipe grounding clamps come in a variety of sizes which are well equipped for all wire ranges between 2-10. And also they support all....
Check Stock

Quickun 10Pcs 2\ Stainless Steel Hose Clamp Worm Gear Clamps Adjustable 1\-2\(27-51mm) Range, Fuel Line Clamp for Water Pipe, Hose Clips, Automative and Mechanical Application

  • 【Wide Hose Clamp Size:】 In this Set, The range of clamp we provide is 1"-2"(exactly 27-51mm), that is easy to storage and carry..
  • 【Durable Quality:】 All the hose clamps including the band, housing and screw are made of stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • 【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • 【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
  • 【Function and Use:】These clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply for automotive, industrial, marine, shield, household etc..
Check Stock

Glarks 65-Pieces 304 Stainless Steel Adjustable 8-44mm Range Worm Gear Hose Clamps Assortment Kit, Fuel Line Clamp for Water Pipe, Plumbing, Automotive and Mechanical Application

  • ... Set, The range of clamp we provide is 8-44mm, that is 10pcs 8-12mm, 10pcs 10-16mm, 10pcs 13-19mm, 10pcs 16-25mm, 10pcs 19-29mm, 5pcs 18-32mm, 5pcs 21-38mm, 5pcs 21-44mm total 65pcs packed in a plastic box, easy to storage and carry..
  • ★【Durable Quality:】 All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ★【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • ★【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
  • ★【Function and Use:】These clamps are locking secure and tight, widely use....
Check Stock

Glarks 100Pcs Adjustable 8-44mm Range 304 Stainless Steel Worm Gear Hose Clamps Assortment Kit, Fuel Line Clamp for Water Pipe, Plumbing, Automotive and Mechanical Application (Hose Clamp Kit)

  • ★【Wide Hose Clamp Size:】 In this Set, The range of clamp we provide is 8-44mm, that is 20pcs 8-12mm, 15pcs 10-16mm, 15pcs 13-19mm, 10pcs 16-25mm, 10pcs 19-29mm, 10pcs 18-32mm, 10pcs 21-38mm, 10pcs 21-44mm total 100pcs packed in a plastic box, easy to storage and carry..
  • ★【Durable Quality:】 All the hose clamps including the band, housing and screw are made of 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ★【Adjustable Style:】 All the hose clamps with screws, you can adjust the size according to the diameter of the pipe, clamps are flexible and ductile, so you can install and remove them at any time. The range of clamps represents the minimum and maximum sizes they can be adjusted..
  • ★【Save Time and Money:】These stainless steel hose clamps can be attached on hoses pipe joints to fittings to prevent liquid leakage, saving your time and money on costly repairs the pipe..
  • ★【Function and Use:】These clamps are locking secure and tight, widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply for automotive, industrial, marine, shield, household etc..
Check Stock

20Pcs 1/2 Inch P-Type Cable Clamps, Stainless Steel Rubber Cushion Pipe Clamps Assorted, Tube Holder for Tube, Pipe or Wire Cord Installation

  • MATERIAL: Made from 304 premium stainless steel with rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy and reliable. The quality rubber insulation on the clamps holds up flawlessly. It is pliable which protect the tube well and keeps the clamp securely in place.
  • SIZE: Cable clamp screw hole diameter: 6.5mm, fit for 6M( 1/4 inch) screw bolt to through them. Cable clamp inside diameter 1/2 inch. Fit for 1/2 inch (outside diameter) wiring, lines,hoses or cables to a panel or frame application.
  • EASY TO INSTALL: The P-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install.
  • PACKAGE INCLUDE: Total 20Pcs rubber cushioned clamps are packed in a transparent plastic case, which is sturdy and neat, convenient for storage and access.
  • APPLICATION: Rubber pipe clamps apply to automotive, industrial, boat marine, windshield, household etc. Use for wiring, cables, pipe, rack, line management and restoration. No matter in salt water or air environment.
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock