Reviews Pipe Nipple Adapter

DANCO Decorative Bathtub Faucet Spout with Pull Up Diverter | 6 Inch Length | Chrome Finish (10315)

  • MODERN DESIGN - The Danco tub spout is ideal for replacing and updating your worn-out, non-functioning tub spout and the decorative design will give a fresh update to your bathtub..
  • CONNECTION SIZE: Designed to fit 1/2 in. Copper Pipe Slip Connection, 1/2 in. Male Threaded Connection with Short Stub out connection, 1/2 in. Male Threaded Connection with Long Stub out Nipple and 3/4 in. Male Threaded Connection with Short Stub Out Nipple..
  • ADAPTERS INCLUDED: This Tub spout DIY installation kit comes with an extension nipple and adapter to ensure a snug fit onto your existing stub out nipple pipe to replace your existing tub spout..
  • DIVERTER INCLUDED: This tub spout includes a diverter lift rod to allow water stream to flow though downward into the tub or upward into showerhead..
  • TUB SPOUT REACH: The bathtub faucet spout has a 5 1/2 in. reach..
  • BUILT TO LAST: The durable metal construction provides strength, longevity and will endure the rigors of everyday use.
  • HASSLE-FREE INSTALLATION: You will need Phillips screwdriver, sandpaper, silicon grease and pipe thread tape to install and to help prevent leaks and provide a better seal during installation..
  • CHROME FINISH resists corrosion and tarnishing and will complement your existing bathroom fixtures..
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service.
  • ⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you ....
Check Stock

Tub Spout with Rear Diverter and Brass Top Shower Adapter, 3/4 inch to 1/2 inch IPS Face Bushing, 5-1/4 inch Length, Chrome Finish

  • Tub spout with rear push and pull diverter and brass top shower adapter. 5-1/4 inch length replacement part..
  • Includes a plastic bushing adpater for 1/2" pipe size. For 3/4" pipe size, please remove the plastic bushing adapter..
  • The length of the pipe (nipple) that is coming out from your wall should be 1/2" to 3/4" to avoid a gap between the wall and the edge of the spout..
  • Durable metal construction stainless steel body.
  • Polished chrome finish offers an elegant appearance.
Check Stock

SUPPLY GIANT OQCM2025-5 Nipple pipe, 2 in. x 2-1/2 in, Black, 5 Pack

  • PIPE NIPPLE TYPE: pipe nipple fitting male NPT (National Pipe Thread) thread made of superior coating steel for commercial use residential application and all your DIY projects. Black coated schedule 40, 150 PSI.
  • PIPE FUNCTION: nipple joins two pipes or extending length.
  • HIGH QUALITY: durable pipe steel material manufactured using advanced technology.
  • RATING APPROVAL: meets ASTM and ANSI standards.
  • DECORATIVE USES: pipes can be used for decorative purposes for industrial feel in room décor, furniture shelves and accessories.
Check Stock

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

Mytee 8500 15 ft. Vacuum and Solution Hose Combo

  • Nylon pipe nipple 3/4” x 3/4” (3 each).
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

boost/vacuum gauge silicone coupler adapter - Car Turbocharger Pipe Fitting Universal Turbocharger Silicone Boost Pipe Hose Nipple Turbo Vacuum VAC Gauge Fitting TDI

  • Wide Application---The turbocharger pipe fitting is suitable for a 4mm inner diameter pipe. 100% brand new aftermarket Boost Pipe Fitting that has never been used.
  • For Boost Gauge---This boost hose nipple fitting allows you to fit a boost gauge or any other type of instrument where vacuum or boost pressure is required.
  • Superior Quality Aluminum Alloy---The turbo boost pipe hose nipple is made of high quality aluminum alloy and durable to use. The manufacture of the fitting meets the strict quality requirements.
  • Easy Installation---The turbocharger mounting kit is easy to install, simply drill a 8mm hole in your silicone boost pipe and push the nipple through the hole (from the inside), put on the sealing o-ring, washer and tighten down with the nut.
  • Quality Assurance---As a professional seller, we provide high quality products and considerate services. Every product must go through strict inspection to ensure reliable quality. Please rest assured to buy our products, hope you have a pleasant shopping experience.
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

KISEER 30 Pack Automatic Chicken Waterer Poultry Water Nipple Drinker Feeders Hen Duck Screw Style

  • Manufacturer recommends 3 birds per nipple.
  • Screw directly into PVC pipe, or use reducing tees with Teflon tape for round PVC pipe.
  • Packaging Includes: Pack of 30 Water nipple..
  • Ideal for broilers, breeders, layers, pullets, ducks and game birds.
Check Stock

DANCO Replacement Tub Spout with Diverter, Chrome, 5-Inch, Fitting 1/2-Inch or 3/4-Inch IPS, 1-Set (80765)

  • ...: You will need pipe thread tape, a flat head screwdriver, adjustable pliers and a Philips screwdriver.
  • CHROME FINISH resists corrosion and tarnishing while creating a bright, refreshing feel for your bathroom.
  • Replacement tub spout with diverter is designed to fit 1/2 in. or 3/4 in. IPS end-threaded stub out nipple (adapter included).
  • Before installing tub spout, be sure to wrap two to four turns of Thread Tape onto threaded end of stub out nipple.
  • Diverter included allowing water to flow upward to the showerhead.
  • Chrome finish. Installs with simple household tools making this suitable for a DIY project.
Check Stock

Premium Industrial PVC Pipe Schedule 80 Grey 2 Inch (2.0) Grey/PVC / 5 FT

  • ✔(3/4 INCH X 12 INCH BLACK PIPE NIPPLE 5 PACK ): Time to get creative! Get started on your home projects with our PREMIUM Black Pipes perfect for your bedroom, bathroom, kitchen and dining room. Grab our (5-Pack) and save extra money compared to your local hardware stores. With our multi-pack you save time and money.So you have more time to focus on building your rustic shelves, clothing racks, towel bars, table legs, and other home furniture.
  • ✔GREAT FOR DIY CRAFT PROJECTS: Update your house decor with an industrial look that will impress your family and friends! Perfect for at home Do-It-Yourself and restoration projects. Create stunning designs of bookshelves, desks, tables,and television stands. Suitable for steampunk lamps, rustic shelves, antique decorations, and vintage-retro themed furniture.
  • ✔HIGH QUALITY INDUSTRY CERTIFIED: We constructed our premium black pipes to meet Industry Standards. They can easily attach to other threaded pipes or fittings. They are graded ASME B1.20.1 and ASTM A53 for black pipe nipple. National Pipe Thread Taper (NPT) Male threads on both ends to connect to female threaded pipes or fittings. Feel the quality with our Premium Black Pipes.
  • ✔AUTHENTIC MALLEABLE IRON: Don't accept cheap imitations with CMI inc kno....
Check Stock

Nipple, 1 X 6 In

  • Price For: Each Max. Temp.: 140 Degrees F Item: Nipple Material: PVC Color: Gray Schedule: 80 Item: Nipple Pipe Size: 1-1/4" Length: 4" Standards: ASTM D.2467, NSF-14 Certified Connection Type: Threaded Max. Pressure: 160 psi @ 73 Degrees F Country of Origin (subject to change): United States.
Check Stock