Reviews Pipe Insulation For Hot Water Pipes

Himesi DIY Professional Pipe Insulation Foam Tube 1/4',1/2',1',1-1/4',2' Outdoor Pipe Insulation Condensing Boiler Gas Insulation Pipe Heat Preservation Insulated,1pcs (Size : 2' x3/4' x6ft)

  • ✄【Material】- Rubber-plastic foam, good insulation, heat insulation, sound insulation, good vibration resistance.
  • ✄[Insulation] – Pipe insulation pipes are excellent at preventing pipe freezing and energy loss. Suitable for indoor and outdoor cold and hot water pipes, gas pipes, boiler pipes, heating pipes, steam pipes.
  • ✄[Anti-collision] – Foam tube storage can protect your pipes from bumps and scratches and is a good choice for extending the life of your pipes.
  • ✄[Weather Resistance] – Another common use of soft rubber foam is for various door sealing and window insulation.
  • ✄【Easy installation】 – Put it directly on the pipe, even if you are not a professional plumber, you can do professional water pipe insulation, saving labor and time.
Check Stock

Halero Pipe Wrap Insulation 1/5 Inch Thick Pipe Insulation High Density Waterproof Foam Tape with Self Adhesive Application for Hot or Cold Pipe 26FT Length× 6 Inch Width

  • 【Size】26'×6"×1/5" waterproof pipe insulation foam wrap tape.(length:8m,width:15cm,thickness:5mm).
  • 【High Density Foam】This duct insulation foam is made with high density closed cell PE foam material and a high quality aluminum foil backing,which has good insulation properties, and is resistant to cold, heat, oil, and moisture..
  • 【Strong Self Adhesive】Can firmly stick to the surface, not easy to fall off, can provide better sealing..
  • 【Easy to Cut】The pipe warmers material is easy to cut and install, and can be cut according to the length you need. Since the width is wider than the general insulating foam adhesive, it can be divided into two or more parts for use..
  • 【Excellent Thermal Insulation Effect】Our pipe insulation tape is very suitable for hot and cold pipes. It can lock the heat of the hot water pipes to avoid loss, and also help to prevent the cold water pipes from getting wet and prevent the floor from getting wet. At the same time, it also has a certain protective effect on the pipes..
Check Stock

Thermwell Products 12\X15' Fbg Insulation Sp55 Pipe Insulation

  • Commercial grade high temperature self sealing fiberglass tube 1/2″ thick and 3 feet long with reinforced foil & paper wrap.
  • Used for pipes immediately exiting furnace and water heaters, where foam pipe insulation might not be appropriate.
  • If your ductwork and your hot water pipes are not properly insulated or not insulated at all, you could be wasting up to 40% of your monthly home energy bill.
  • Frost King’s pipe and duct insulation solutions not only save you money, they’ll make your air conditioning and hot water heater work quickly and efficiently.
Check Stock

Frost King Fiberglass Pipe Wrap Kits, 3\x1/2\x25'

  • Use on cold pipes to stop sweating and dripping.
  • Frost King 3-Inch X 1/2-Inch X 25-Feet Roll. Fiberglass. Pipe Insulation Kit.
  • Simple, And Effective Way To Insulate Pipes Of All Diameters.
  • Ideal For Overwrapping Electric Heat Cables, And Used To Prevent Water Pipes Freezing.
  • Comes With 25-Feet Plastic Vapor Barrier, 1.6 R-value Package Covers, 17-Feet Of 1/2-Inch Pipe, 12-Feet Of 3/4-Inch Pipe, Or 10-Feet Of 1-Inch Pipe.
  • Great For Either Hot Or Cold Water Pipes.
Check Stock

12 Pack Pipe Insulation Foam Tube Pre Slit Self Adhesive Foam Pipe Covers Polyethylene for Outdoor Indoor Water Pipe Pipeline (0.8 Inch)

  • Sufficient Quantity: you will receive 12 pieces of pipe insulation foam tubes, with the size of 2 cm/ 0.8 inch in diameter of the middle hole, 1 cm/ 0.4 inch in thickness, 40 cm/ 15.7 inch in length, ample quantity can meet your using needs.
  • Quality Material: the foam pipe insulation is made of foam, with flame retardant on the surface to prevent fire, safe and reliable to use.
  • Self Adhesive: the water pipe insulation tube is self adhesive, will form tightly seal after removing the protective paper, not easy to fall, reassuring to use.
  • Practical Function: the outdoor pipe insulation cover is suitable for hot and cold pipes, which can save resources by stopping condensation, and can prevent heat loss, fitting to prevent water pipes from freezing in winter and sweating in summer.
  • Convenient to Use: the foam insulation tubing is equipped with the pre cutting slit, which makes it easier to open and install on the pipe, bringing much convenience for your installation.
Check Stock

Frost King F17XAD Pre-Slit Tubular Fiberglass Cover with self-Sealing Jackets (Bulk) for 3" Pipes

  • Commercial grade high temperature self sealing fiberglass tube 1/2″ thick and 3 feet long with reinforced foil & paper wrap.
  • Used for pipes immediately exiting furnace and water heaters, where foam pipe insulation might not be appropriate.
  • If your ductwork and your hot water pipes are not properly insulated or not insulated at all, you could be wasting up to 40% of your monthly home energy bill.
  • Frost King’s pipe and duct insulation solutions not only save you money, they’ll make your air conditioning and hot water heater work quickly and efficiently.
Check Stock

Midline Valve 8434P Sillcock Pipe Chrome Plated Brass Body Frost 1/2 inch PEX Connection and 3/4 inch Hose Bib Lead Free, 12

  • Commercial grade high temperature self sealing fiberglass tube 1/2″ thick and 3 feet long with reinforced foil & paper wrap.
  • Used for pipes immediately exiting furnace and water heaters, where foam pipe insulation might not be appropriate.
  • If your ductwork and your hot water pipes are not properly insulated or not insulated at all, you could be wasting up to 40% of your monthly home energy bill.
  • Frost King’s pipe and duct insulation solutions not only save you money, they’ll make your air conditioning and hot water heater work quickly and efficiently.
Check Stock

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 125-feet 120V Roof deicing and Pipe freeze Protection

  • ...n the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional..
  • Protect pipes up to 2 1/2” in diameter. For a better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1” thick insulation material. ETL approved. 50 degrees F for pipe freeze protection.3 ft 18/3 cold lead with grounded plug..
  • Roof deicing application: HEATIT JHSF1 was designed to prevent the ice dam formation not to melt the ice dams which were already formed. Please turn on the cable at the beginning of snowing. Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic roofs, composite (tar and gravel) roofs and so on. Rated 10W/ft at 32°F (0°C) for roof deicing. For roof deicing application, you may need to buy clips and hangers separately..
  • Designed to maintain water temperature in the supply piping system, reducing or eliminating the delay in obtain....
Check Stock

DOBTIM Pipe Insulation Foam Wrap Tape, self Adhesive with high Resilience for Pipe Insulation Wrap 13 Ft Long x 3 Inch Wide x 1/2 Inch Thick

  • GOOD PERFORMANCE- High stability and resilience, adhesive strength.flexible and durable excellent tightness and deformation resistance feature. resistance of flame, vapor, moisture, weather, cold, heat, oil, smoke and etc..
  • STRONG ADHESIVE- Cell foam insulates and protects pipes, reduces energy loss.The foam insulation tape has strong adhesive backing, can stick firmly, please clean the surface before use..
  • EASY TO INSTALL- Easy to remove without any residue, cut, tear and peel.you can cut the size with scissors or blade and bend in any shape. Adjustable and long-lasting with heavy-duty..
  • VERSATILE USE- Foam tape pipe insulation locks in heat and reduces wasteful heat radiation loss on hot water pipes, Helps keep cold water pipes from moisture and condensation build up..
  • WHAT YOU GET- Product measures at 13 Ft Long x 2 Inch Wide x 1/2 Inch thick, foam insulation wrap tape insulation wrap is easy to use and install.1/2 Inch thick vapor barrier stops moisture leaks and build up on your pipes..
Check Stock

M-D Building Products 50150 Pipe Insulation, Black

  • Stops condensation on cold pipes to prevent water damage.
  • Easy to install. Tube Pipe Insulation- 3/8 inch Wall - 3/4 inch x 6 feet.
Check Stock

Pipe Insulation Cover by Pipe Warmers – The Original Backflow Preventer, Sprinkler Freeze Protection – Highly Insulated Pouch – Outdoor Winter Irrigation, Sprinkler, Spigot, Cover. (19 W x 25H, Sand)

  • Backflow Valve Cover Insulated Size: 17”W x 21”H(Outside dimensions, fit up to 15” wide backflow valves system) , Recommend to measure pipe before purchase Sprinkler Valve Cover, and to reserve 1 inch or above..
  • Our insulation pouch for outdoor pipes is made of a thick and durable industrial grade 600D PVC Oxford Polyester. Protect your irrigation pipe with an insulation pouch that's reinforced with a double stitch that won’t come apart. Replace your old backflow blanket with our backflow preventer insulated cover made with strong Velcro on the bottom to keep it from blowing away in the wind or stolen..
  • From harsh snow to extreme sun and heat, our outdoor pipe insulation cover or sprinkler insulation bag never become brittle or peel like those other green pipe warmers that expose the insulation which can lead to major damage. Even during winds and rainstorms, our water-resistant insulated pouch for pipes will stay on snug and secure. Stay prepared with our resilient sprinkler backflow cover for winter..
  • Our backflow cover filled with 3M Thinsulate insulation to guard against sub freezing temperatures, wind, rust and water. This material is mostly used for down jacket which can keep warm but keep the moist out. And the outer water-repellent ....
Check Stock

2 in x 13 FT Pipe Insulation Tape - Sponge Rubber Foam Tape - Weather Resistant Water Pipe Wrap Tape - Foam Pipe Insulation - for Winter Water Line Winterizing Heat Preservation

  • 【EASY TO INSTALL】Our pipe insulation tape has a strong adhesive on the back. Just peel off the film backing and tie the tape around the outdoor plumbing. The tape will stick firmly to the pipe and will not come loose even after a long time. (2 Inches Wide, 1/8 Inches Thickness, 13 Feet Long).
  • 【MAXIMUM PIPE FREEZE PROTECTION】Match with our TOHONFOO Customized Design Backflow Preventer Cover to protect your Backflow Preventer in cold winter or hot summer Perfectly..
  • 【Avoid High Repair Costs】Protects your pipe from freezing, bursting, and blowouts due to severe weather conditions like snow, rain, wind, and sun exposure heating. Avoid the expensive costs of pipe replacement and repair every year..
  • 【PROTECT YOUR PIPES】Our thermal insulation freezer tape has the advantages of good waterproofing, weather resistance, and so on. Especially suitable for protecting outdoor pipes from freezing in winter, or damage from the scorching sun in summer..
  • 【DURABILITY INSULATION TAPE】You are guaranteed optimum durability every time you choose our seal tape for your insulation.....
Check Stock

HEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 75-feet 120V Roof deicing and Pipe freeze Protection

  • 6 ft. water pipe heating cable, 42 watt, black color.
  • Stops metal and rigid plastic pipes from freezing down to -40°F — built-in thermostat automatically turns heating on when pipe temperature is below 42.8° F (close to freezing) and turns heating off once pipe is warmed to 55.4° F (well above freezing).
  • A single 6 foot heating cable is suitable for 6 foot to 8 foot long pipes that are 3/8 inches to 3/4 inches in diameter, or for 6 foot long pipes that are 1 to 1-1/2" in diameter. NOTE: Use only for water filled plastic (including PEX) or metal pipes. Not for use with anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines, and so on..
  • Features grounded plug with indicator light.
  • Pre-assembled, easy to install using the included instructions. Materials required (not included) are: aluminum foil (recommended for plastic pipe), fiberglass plumbing pipe insulation, fiberglass tape or similar with temperature rating 175° F or higher..
Check Stock