Reviews Pipe Fabrication

10-Inch Digital Torpedo Level and Protractor | Neodymium Magnets | Bright LED Display | V-GROOVE MAGNETIC BASE | IP54 Dust/Water Resistant smart level with Carrying Bag

  • HIGH-ACCURACY -- Accurate to the ±0.1° at 0° and 90° and ±0.2° from 1-89°..
  • displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. Great for roofs, rails, ADA ramps.
  • JOBSITE TOUGH -- Sturdy solid I-beam aluminum frame, Neodymium magnets, rubber end caps and IP54 dust/water splash resistant protection for harsh working environments.
  • DUAL FUNCTIONALITY With STRONG NEODYMIUM MAGNETS -- As a true (absolute) digital level and electronic inclinometer / protractor lets you set or check relative angles between surfaces. Plus, magnetic base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication and more.
  • LARGE, BRIGHT GREEN LED DISPLAY With AUDIO INDICATOR -- This level features a large, bright LED display that flips, so you can easily read your measurements all day and night – even in the darkest spaces. What's more, we craft our digital level with audio indicator functionality, so you can achieve level and 90 degrees even with your eyes closed.
  • V-GROOVE MAGNETIC BASE -- Magnetic v-groove base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication.
Check Stock

Rohn 25 Series 40' Basic Tower (25G)

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (5) 45G STANDARD 10' SECTION. 50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete.
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. *This kit is shipped via freight only, see below for more information*.
Check Stock

Rohn 25G Series 30' Basic Tower Kit

  • INCLUDES: (2) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *30' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 20' Basic Tower Kit

  • INCLUDES: (1) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *20' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Portable, Progress Solar and Wind Powered Light Tower

  • Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Universal 2.5 Inches OD DIY Custom Pipe Kits, Straight & 45 / 90 Degree & U-Bands, 16-Pieces, Mild Steel

  • Product Description - These are DIY custom pipe with 2.5" depth flared slip fit end..
  • Best Replacement - Come with set of [4] 90 degree pipes, [4] 45 degree pipes, [4] 180 degree u-bends and [4] 48" straight pipes, can make the replacement for your old and rust pipe..
  • Extraordinary Quality - It is constructed of high quality mild steel construction with mandrel-bends for strength and rust-resistant, to ensure an extremely long lasting operate life..
  • Brilliant Characteristic - It is high performance racing design with slip fit, joint to provide easiest fabrication, can maximize smoothest high exhaust air flow rate..
  • Product Specification - Overall Diameter: 2.5" | Inlet / Outlet: 2.5" OD | Flange Type: Slip-Fit | Thickness: 16 Gauge.
Check Stock

Rohn 25G Series 50' Basic Tower Kit - Rohn 25G

  • INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Universal 2.5 inches OD DIY Custom Mandrel Pipe Kits, Straight & 45/ 90 Degree & U-Bends, 16-Pieces, Stainless Steel

  • Product Description - These are DIY custom pipe with 2.5" depth flared slip fit end..
  • Best Replacement - Come with set of [4] 90 degree pipes, [4] 45 degree pipes, [4] 180 degree u-bends and [4] 48" straight pipes, can make the replacement for your old and rust pipe..
  • Extraordinary Quality - It is constructed of high quality stainless steel construction with mandrel-bends for strength and rust-resistant, to ensure an extremely long lasting operate life..
  • Brilliant Characteristic - It is high performance racing design with slip fit, joint to provide easiest fabrication, can maximize smoothest high exhaust air flow rate..
  • Product Specification - Overall Diameter: 2.5" | Inlet / Outlet: 2.5" OD | Flange Type: Slip-Fit | Thickness: 16 Gauge.
Check Stock

‎DNA MOTORING ZTL-20RAW 16Pcs 2 Inches Mild Steel DIY Custom Exhaust Tubing Mandrel Bend Pipes Straight & U-Bend Kit, Universal Fit

  • 【Universal Kit】Comes with 4 X 19" 90 Degree Bend.
  • 2.5" Depth Flared Slip Fit End (Deduct 2.5" From Pipe Length when Joining Pipes).
  • 【Mild Steel Construction】Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Easy To Use】Slip Fit Ends for Easy Installation, Provides Easiest Fabrication.
  • 【DIY Custom】Perfect Do-it-yourself Kit with Plenty of Options for your ,otorcycle, Automotive, Atv or Any Other Need you May Have.
Check Stock

ROHN 25SS040 40′ Self-Supporting Tower, No Ice

  • INCLUDES: (3) ROHN 25G STANDARD 10′ SECTIONS, (1) ROHN 25AG2 STANDARD 9′ 9″ TOP SECTION, (1) ROHN SB25G5 5′ SHORT BASE FOR EMBEDMENT IN CONCRETE, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 25G SELF-SUPPORTING TOWER SPECIFICATIONS.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4″ OD, 16 Gauge legs 5/16″ OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4″ equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. Note that the short concrete base can only be connected one ONE end. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24″ OD x 2.08″ ID Overall length is 9’9″ – see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Single 12-48V DC LED FAA L-810 Obstruction Light, Red, Stead-Burning

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (1) ROHN SB45G 5' SHORT BASE FOR EMBEDMENT IN CONCRETE, (3) 45G STANDARD 10' SECTION, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 45G SELF-SUPPORTING TOWER SPECIFICATIONS. *This kit is shipped via freight only, see below for more information* *Be sure your contact number is current on your order*.
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. SB45G Weight: 32 lbs.
Check Stock

DynoMax 39510 Stainless Steel Exhaust System

  • COMPATIBILITY -- Designed for Jeep Wrangler JK.
  • see product information for compatibility and engine specs.
  • PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
  • COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
  • EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
  • IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.
Check Stock

Walker Exhaust CalCat Carb 81126 Universal Catalytic Converter

  • CARB COMPLIANT -- For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO & other states requiring....
  • SUPERIOR TECHNOLOGY -- Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters).
  • CONSISTENT PERFORMANCE -- Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance....
  • DURABLE -- Features stainless-steel body with aluminized pipe and heat shields for durability.
  • FLEXIBLE SOLUTION -- Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for....
Check Stock