Reviews Pipe Ends

Roadformer 3 Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 3" exhaust clamp is to joint 3" OD pipe overlapping into 3" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Forney 71806 Emery Cloth, 320-Grit, 1-Inch-by-10-Yard Bench Roll

  • 320 Grit, 1x 10 yd., emery cloth, bench roll, hand Sanding dry & cleaning of metal, Wood & pipe ends, aluminum Oxide coating, open grain prevents loading.
  • Hand dry sanding and cleaning of metal, wood and pipe ends.
Check Stock

Spears 448-G Series PVC Pipe Fitting, Cap, Schedule 40, Gray, 2' NPT Female

  • Protective - Carbon steel pipes are easy to get rust from the two sides of the pipe, for its coating/ painting on the two sides will be damaged easily. The vinyl caps can protect these ends by covering it, anti slip &tear, and they can also block water vapor to some extent..
  • Flexible - Made of high quality PVC, super soft &flexible. (Attention! The size in the title means they fit for the OUTSIDE DIAMETER of the pipes).
  • Easy to install - Just slip them on both ends of the pipes, and they will be firmly fixed to both ends of the pipe..
  • Multi-purpose - Suitable for covering posts, feet of furniture ,handrails, wrought iron pipes, tubes for indoor& outdoor uses..
  • Optional sizes - Round: 3/4”, 7/8”, 1”, 1 1/4”, 1 1/2”, 1 3/4, 2”. Square: 1”..
Check Stock

Flex-Drain 51510 Flexible/Expandable Landscaping Drain Pipe, Perforated with Filter Sock, 4-Inch by 25-Feet

  • Solid corrugated flexible pipe. Expands from 6’ to 25’.
  • Connects over 3" corrugated pipe, inside 4" corrugated pipe and 4" PVC pipe.
  • Does not allow water to seep in or out anywhere except pipe ends.
  • Bends around almost anything – no elbows needed.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Pony Tools 50 3/4in. 6 Pack Ajustable Clamp Fixture for Black Pipe

  • Pony 50 Clamp Fixture for 3/4 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 3/4" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

Pony Tools 52 6 Pack 1/2in. Ajustable Clamp Fixture for Black Pipe

  • Pony 52 Clamp Fixture for 1/2 Inch Black Pipe is America's most popular, most widely-used clamp fixture design. It is ideal for metalworking, woodworking and frame assembly in applications that range from do-it-yourself to industrial production.
  • Mounts on any length 1/2" black pipe with both ends threaded (pipe not furnished). A Pony Clamp Fixture is one of the handiest tools in any shop. One set of Pony Clamp Fixtures can be used to make any number of different length bar clamps simply by using the fixtures on different lengths of pipe.
  • Heavy-duty black pipe is recommended. No tools are required for assembly. Simply screw the head assembly onto the pipe threads at one end.
  • Slide the tail-stop onto the pipe at the other end. Then apply the coil-spring stop to the pipe threads at the tail-stop end of the pipe to prevent the tail-stop from sliding off the pipe during adjustment away from the work being clamped.
  • Pony Clamp Fixtures are interchangeable from one pipe length to another, so one set can serve several needs.
Check Stock

Roadformer 4 Lap Joint Exhaust Band Clamp - Preformed Stainless Steel Used to Seal Muffler Insets Outsets Elbow Joints Flex Pipes and Other Exhaust System Connection

  • Roadformer 4" exhaust clamp is to joint 4" OD pipe overlapping into 4" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • Roadformer stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer does dedicate in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Muzata 20Pack Round Vinyl End Caps 1 3/4 inch PVC Flexible Protector, Soft Rubber Cover for Furniture Foot Post Pipe Tube, M019

  • Protective - Carbon steel pipes are easy to get rust from the two sides of the pipe, for its coating/ painting on the two sides will be damaged easily. The vinyl caps can protect these ends by covering it, anti slip &tear, and they can also block water vapor to some extent..
  • Flexible - Made of high quality PVC, super soft &flexible. (Attention! The size in the title means they fit for the OUTSIDE DIAMETER of the pipes).
  • Easy to install - Just slip them on both ends of the pipes, and they will be firmly fixed to both ends of the pipe..
  • Multi-purpose - Suitable for covering posts, feet of furniture ,handrails, wrought iron pipes, tubes for indoor& outdoor uses..
  • Optional sizes - Round: 3/4”, 7/8”, 1”, 1 1/4”, 1 1/2”, 1 3/4, 2”. Square: 1”..
Check Stock

uxcell 20pcs Rubber End Caps 1/4\(6mm) ID Vinyl Round Tube Bolt Cap Cover Thread Protectors Black

  • 【Widely Application】1. All kinds of pipe ends protection: plastic pipe, metal pipe, oil pipe, water pipe, vacuum pipe.
  • 2 Thread protection: bolt, screw, nut thread protection.
  • 【Widely Application】3. For shelf, fence, rail protection.
  • 4. For furniture, chair, dining table, stool, hammock decoration protection.
  • 5.For hole cover, protect, decorate, seal (drain hole).
  • 【Size Selection】Because rubber material is soft and elastic, we recommend choosing rubber end cap that is slightly smaller than the outer diameter of the product to be protected. For example: the outer diameter of your product is 9.8mm dia, choose the rubber cover of 9.5mm!.
  • 【Rubber Material】Soft, Elastic, Accurate Size, Oil Resistance, Heat Resistance, Dust Resistance, Long Service Life.
Check Stock

FORMUFIT F012CRX-UV Cross PVC Fitting, Furniture Grade, 1/2\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration. 20% Deeper sockets than plumbing fittings..
  • WORKS WITH 1/2" SIZE PVC PIPE: Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0. 840"). Uses either off-the-shelf 1/2" Size pipe or FORMUFIT Furniture Grade PVC pipe..
  • MADE TO LAST, EVEN UNDER LIGHTS: UV resistant PVC material resists indirect sunlight and fluorescent lighting degradation. No yellowing, discoloration or cracking unlike sub-par PVC fittings.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock