Reviews Pipe End Prep Tool

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

  • Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
  • Right-hand cutting tool has a clockwise cutting function..
  • NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
  • Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock

1 Pieces Drip Irrigation Tubing Hole Punch Tool for Easier 1/4 Inch Fitting Emitter Insertion and 50 Pieces Drip Irrigation Plugs Goof Plugs for Hose or Tubing End Caps Puncture to Insert Fittings

  • The package includes: 1 drip irrigation pipe punching machine and 50 drip irrigation plugs, a reasonable package for your daily use.
  • Appropriate size: The punch size is 3 mm (0.118 inch), which can fit tightly to eliminate waste and maintain proper pressure in the drip system. Both ends of the irrigation plug are of different sizes. One end is suitable for standard holes of 3 mm-6 mm, or one end of any 1/4 inch feeder is covered, and the other end is suitable for worn transmitters of 7 mm or about 1/4 inch Hole.
  • this multifunctional stopper is suitable for filling into 1/2 inch drip irrigation pipe.
  • Practical and durable: the punching tools are made of quality plastic and metal, practical and durable, not easy to rust and damage.
  • the plastic part of the punch allows you to hold it comfortably, and the punch has been polished, so it will not change It is blunt and can serve you for a long time.
  • the drip irrigation pipe plug is made of quality plastic, which is not easy to break or deform, sturdy and durable, waterproof, and can be applied outdoors in sunlight or rainy weather..
  • Scope of application: Irrigation pipe puncher can be applied to perforate polyethylene pipes for installation of drippers and micro nozzles.
  • suitable for PE pipes with diameters o....
Check Stock

100% Authentic Czech Stainless Steel 3 in 1 Tobacco Pipe Tool Cleaner - Smoking Pipe Reamer Tamper Pokers Tool

  • Our Pipe tool is crafted from premium quality metal for long-lasting strength and durability. Metal construction makes sure the lights will last for years to come without rusting or corroding..
  • The beautiful design and gold accents on the front give it an elegant, classy, and sophisticated look..
  • Attach pipe cleaner tool to your keys or lanyards and keep it easily accessible and handy anytime. The loop at the end can be used to attach it to your keys which makes sure you never lose the pipe tool and can use it whenever needed..
  • Tamper can be used for tamping down the tobacco when the bowl is being packed. It can also be used for crushing the ash together which helps in relighting..
  • The lightweight design does not add any bulk or weight to the pocket.
  • it is a practical tool that provides only utility and function..
Check Stock

BoCID Tube Pipe Hose Bead Roller Intake Intercooler Piping Compatible with Clamps 5/8″ DIY Tool

  • This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
  • Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
  • This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
Check Stock

Reed Tool DEB4 Deburring Tool for Plastic 1-1/4 to 4-Inch

  • One easy revolution of the DEB4 Deburring Tool produces a 3/32-Inch 15-Degree chamfer in seconds.
  • Creates a smooth pipe end so solvent spreads evenly as pipe is joined.
  • Reversible, sharpenable, hardened steel blade for two cutting edges.
  • Deburrs six pipe sizes: 1 1/4-Inch - 4-Inch.
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

Amazon Basics Ratcheting Plastic Pipe Cutter - 1/8-inch to 1-5/8-inch

  • Pipe-cutting tool for cutting plastic pipes and tubes ranging from 1/8 inch to 1-5/8 inches in diameter.
  • lightweight yet sturdy aluminum handle and a sharp stainless steel blade.
  • Suitable for multilayer tubing and most types of plastic, including PVC, CPVC, PP, PEX, PE, and rubber hose.
  • Ratchet drive mechanism ensures energy-efficient cutting.
  • Locking hook on the end of the handle for locking the tool securely closed when not in use.
  • Product dimensions: 8.9 x 4.4 x 1.1 inches (LxWxH).
Check Stock

ICEYLI 2 Pack 60 Inch Long Pipe Cleaner Flexible Tube Cleaning Brush Fridge Cleaning Tool,Stainless Steel Kitchen Drain Tube Cleaning Brushes Sink Fridge Skinny Pipe Drain Dredge Cleaning Tool

  • Durable material: this tube cleaner brush is made from stainless steel and nylon bristles head,which can softly scrub away buildup and avoid....
  • Sunroof drain cleaning tool for car:Our tube hose brush total length is 60-inch.
  • the wire tube brush is flexible to even work for curved tubing that....
  • The nylon bristles long pipe cleaner tubular-shaped brush on one end and loop end on other,the hand ring is designed for easy extraction, so you....
  • Simple Operation : If you find that your home sink or refrigerator pipe is blocked, feed the flexiblestem of tube cleaning brush (brush end first)....
  • Long pipe cleaner brush very perfect for cleaning refrigerator drain,fish tank cleaning,filter systerm,ornaments cleaning,hose/glass tube,water pump....
Check Stock

Tubing Beader Tool, Bead Form Roller Tool Bead Roller/Flare Tool Used for Intercooler Pipe, Intake Tubing Stopper, Tube End Forming Former Fits 5/8″

  • Fitment: Aluminum pipe: diameter from 5/8″ (16mm) to 4″(102mm) max, thickness 3mm.
  • Steel pipe: diameter from 5/8″ (16mm) to 4″(102mm), max thickness 1mm..
  • Easy Operation: insert the end of the tubing between the dies, then start cranking the turning handle and you will get a perfect bead..
  • Better Performance: By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Quality Material: Made of enhanced anodized aluminum with stainless steel components, which ensure a better operation when using this tool..
  • Risk-free Purchase: Please contact us in time if any product and service problem, we will do everything we can to help you. Satisfaction Promised!(1 Year Warranty).
Check Stock

Reed Tool DEB1-2CTS Deburring Tool for Plastic 1-1/4 to 2-Inch CTS Pipe

  • Three sizes of pipe accommodated per DEB1 tool.
Check Stock