TuffMan Tools, Roll Pin Punch Set 9pc - Great for Gun Building and Removing Pins
- ✔️ MAKE REPAIRS LIKE A BOSS! Whether you are looking to repair or change out pins, fix your wife’s jewelry, or make some minor repairs on your car, our Tuffman Roll Pin Punch Set will be the tools that help you get the job done right. The first time.
- ✔️ GUNSMITHING TESTED AND APPROVED. We asked a group of gunsmiths to test the quality, durability, and performance of our Tuffman Roll Pin Punch Set. Our 9 piece set received high ratings in all three areas. We value customer satisfaction above all else..
- ✔️ “GREAT PIN PUNCH SET FOR GUNSMITHING” We love hearing great reviews like this from our awesome customers… “I build custom machinery for a living so I expect a lot from my tools. Even the 1/8" punch is very rigid and sturdy. They are definitely higher quality than I expected at this price!”.
- ✔️ A MANLY-MAN’S ROLL PIN PUNCH SET. Don’t waste your time with weak sauce tools that do more harm than good. We make our tools tough and with precision. The reverse taper tips prevent slipping, scratching, and causing damage to your machinery. We don’t mess around with our Tuffman Roll Pin Punch Set..
- ✔️ GET THE JOB DONE RIGHT, THE FIRST TIME… We know your time, energy, and creativity are valuable, and we promise that our tools....
Check StockHORUSDY 28-Piece Heavy Duty Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch
- Available in 28 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
- Product material: made of chrome vanadium steel, hardness: 54~58HRC, Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
- 16PC Chromium Vanadium Steel:punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge..
- 12PC High Carbon Steel:6PC cold chisel set, 4PC pin punch set and 2PC center punch..
- It is equipped with a special storage bag for easy carrying..
Check StockTuffMan Tools Roll Pin Punch Set & 1.5 lb Dead Blow Hammer, Great for Handymen & Watchmakers, Use to Remove Pins on Cars & Boats
- ✔️ MAKE REPAIRS LIKE A BOSS! Whether you are looking to repair or change out pins, fix your wife’s jewelry, or make some minor repairs on your car, our Tuffman Roll Pin Punch Set will be the tools that help you get the job done right. The first time..
- ✔️ TESTED AND APPROVED. We asked a group of smiths to test the quality, durability, and performance of our Tuffman Roll Pin Punch Set. Our 9 piece set received high ratings in all three areas. We value customer satisfaction above all else..
- ✔️ “GREAT PIN PUNCH SET FOR SMITHING” We love hearing great reviews like this from our awesome customers… “I build custom machinery for a living so I expect a lot from my tools. Even the 1/8" punch is very rigid and sturdy. They are definitely higher quality than I expected at this price!”.
- ✔️ A MANLY-MAN’S ROLL PIN PUNCH SET. Don’t waste your time with weak sauce tools that do more harm than good. We make our tools tough and with precision. The reverse taper tips prevent slipping, scratching, and causing damage to your machinery. We don’t mess around with our Tuffman Roll Pin Punch Set..
- ✔️ GET THE JOB DONE RIGHT, THE FIRST TIME… We know your time, energy, and creativity are valuable, and we promise that our tools will increase th....
Check StockBESTNULE Punch Set, Pin Punches, Punch Tool, Roll Pin Punch Set, Made of High Quality Metal Material Including Punches and Hammer, Mechanical Repair Tool, with Organizer Storage Box (with Bench Block)
- 【Durable in Use】 Made of 40# chrome vanadium steel with special heat treatment. Ideal punch tool for jewelers, watchmakers, and carpenters. Used for machinery, vehicles, woodworking and craft repair. After many experiments, we found that the pin is the most easily damaged part of a whole set of our punch set, so we have made numerous modifications to provide you with excellent quality pin punches, so that you can avoid the abandonment of the whole set of punches due to the breakage of one pin..
- 【All-IN-1 Set】Includes everything you need to get started and suitable for everyone, whether you're a novice or a veteran. This punch set includes 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16". 2Pcs 3/8",15/64" plastic pin punches.
- 1 metal tweezers and 1 hammer with 4 detachable hammer heads.
- 4Pcs hollow end starter punch set including 1/16”,5/64”,3/32”,1/8”.
- 2 Pcs flat pin punches including 1/16" and 3/32".
- 2 Pcs roll pin punches including 1/16" and 3/32".
- 【Detachable Hammer】 In use with a chrome-plated steel hammer. In addition, we added 4 rep....
Check StockPremium Brass Punch Set – 8 Pcs Professional Brass Drive Pin Punch Set - Non-marring Brass Punch Set for Gunsmithing - Assorted Gun Punch Set for Watch Repair Jewelry and Craft – By Maxopro
- DESCRIPTION – Maxopro brass punch set includes eight drive pin punches with a 3.5" overall length and 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" pin diameter sizes. This punch set brass is ideal for repairing or servicing small equipment, machines, and vehicles.
- DURABLE and STURDY – Made from the brass material, it's built to be the last starter punch set you ever need to buy. These Pin Punches are heat-treated for outstanding durability, workability, and overall performance. So if you're looking to invest in super-long-lasting quality, this is the set, even for brass drift punch job.
- MULTIPLE USE – This brass gun punch set is excellent for your workbench, for facilitating upgrading parts, and for accurately tapping or punching objects out or moving from wood. It's a perfect punch set tools for professional and DIY people, and it could be used for driving pins, watches, bracelets, etc..
- BEST VALUE – It is a valuable punch set for jewelers, watchmakers building, engineers, and carpenters to use on machinery, vehicles, woodwork, and crafts. With....
Check StockGrace USA GRRS12 Professional Steel Roll Pin Punch Set with Vinyl Pouch, Gunsmith Tools & Accessories, 12 Piece, Black
- Roll Pin Punch: Made from the highest quality High Carbon Molybdenum Tool Steel and properly heat treated to ensure long life of the punch.
- Roll Spring Punch Set: Each punch is hardened the entire length with tempered striking end and are centerless ground for complete accuracy.
- Steel Punches: Incorporated Reverse taper from tip of punch to help prevent punch from sticking in the work piece. The Punches feature three identifying machine marks to help distinguish between our regular pin punches.
- 12-Piece Punch Set: Set contains one 1/16.
Check StockABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)
- ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set.
- This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material.
- EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool.
- Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
- The pin point is spring-loaded and retracts into handle when punching a hole.
- Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
- BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue....
Check StockMayhew 62254 Pro Pilot Punch Kit, 12-Piece
- Pilot punches, an original Mayhew patented design, also called a roll pin punch, are a punch that fits tightly within a roll pin.
- Drives and removes roll pins and other hollow tension pins.
- Black oxide finish for additional rust protection.
- 12-Piece Set includes: 1/16 x 2-3/4" Pilot Punch, 5/64 x 3/14" Pilot Punch, 3/32 x 3-1/2" Pilot Punch, 1/8 x 4" Pilot Punch, 5/32 x 4-1/2" Pilot Punch, 3/16 x 4-1/2" Pilot Punch, 7/32 x 5" Pilot Punch, 1/4 x 5-1/2" Pilot Punch, 5/16 x 6" Pilot Punch, 3/8 x 6" Pilot Punch, 7/16 x 6" Pilot Punch, 1/2 x 6" Pilot Punch.
Check StockXage 9 Pieces Roll Pin Punch Set – Tool Kit for Jewelers/Gunsmith/Watch Makers/Repairs and Crafts with 1 Double faced mallet
- ★High quality: This roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability.
- ★Full set roll pin punch: 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”punch size, this roll pin punch set kit is perfect tool for gunsmith, jewelers, watchmakers, engineers, carpenters – use on Guns, Machinery, Vehicles, Woodwork and Crafts, a great help of ar15 tools.
- ★Great grip: The knurled handles are deeply cut and let you get a good grip on it while striking with a hammer.
- ★Safe hemispherical recessed roll pins: Hemispherical recessed tips to cradle the roll pin, so it won’t cause scratches or damage to your firearm.
- ★Double-faced soft mallet: The double-faced design of the hammer consists of a yellow polyurethane rubber head for a cushioned strike and black oil-resistant rubber head for an oil surface(Missing Parts will Be Replaced, Just Contact Us).
Check StockWHLLING 21 Pcs Gunsmith Hammer and Punch Set, Roll Pin Punch Set with Brass Punch Steel Punch and Steel Hammer In Storage Case for Gunsmithing
- ➤Multipurpose: WHLLING Hammer and Punch Set contain every gunsmithing tool you need to assemble and disassemble your firearm.
- also used in machinery, vehicles, wood products and crafts.
- ➤Durable& Sturdy: The roll pin punch set all made of high-quality material--- brass, steel and plastic, with upgraded and reinforcement processed design, more sturdy and durable.
- ➤Hammer and Punch Supplies Includes: 1/8", 9/64", 5/32" steel punches, 3/16", 7/32", 1/4", 9/32" and 5/16" brass punches, 15/64", 3/8" plastic punches, 1/16”, 5/64”, 3/32”, 1/8”roll pin starter punch, 2pcs 1/16", 2pcs 3/32" steel roll pin punch, a hammer and 2 replaceable hammer heads.
- ➤Double Face Hammer: Brass and stainless steel hammer head can ensure the use of solid and no scratches, we also have two replacement plastic/nylon hammerhead to meet different meets.
- ➤EDC Gunsmith's Tool Kit: The black box is made according to the size of the punch, Keeps everything neatly organized.
Check StockTuffMan Tools Roll Pin Punch Set with Soft Mallet - Great for Gun Building and Removing Pins
- MAKE REPAIRS LIKE A BOSS! Whether you are looking to repair or change out pins, fix your wife’s jewelry, or make some minor repairs on your car, our....
- GUNSMITHING TESTED AND APPROVED. We asked a group of gunsmiths to test the quality, durability, and performance of our Tuffman Roll Pin Punch Set. Our....
- “GREAT PIN PUNCH SET FOR GUNSMITHING” We love hearing great reviews like this from our awesome customers… “I build custom machinery for a....
- A MANLY-MAN’S ROLL PIN PUNCH SET. Don’t waste your time with weak sauce tools that do more harm than good. We make our tools tough and with....
- GET THE JOB DONE RIGHT, THE FIRST TIME… We know your time, energy, and creativity are valuable, and we promise that our tools will increase the....
Check StockJOREST Watch Band Tool Kit, Repair Kit for Watch Strap Adjustment and Replacement and Resizing , with Watch Link Removal Tool, 10 Spring Bars, 10 Pins, User Manual
- 【Difference with other products】 — Compared with other products, we added the leather strap punch, you can punch to adjust the length of your leather strap.
- we lengthened the length of the pin punch, increased the grip handle of the double-headed hammer, more conducive to operation.
- shortened the pin of the pin punch pin, and use metal to protect the pin is not easy to bend and can be replaced..
- 【Two strap remover with use】–metal strap remover is more suitable for taking out the strap pin directly.
- watch bracket and double-headed hammer is convenient to insert the strap pin, two tools with use more convenient..
- 【Precautions】–When you use the metal strap remover and fail to eject the pin, please check whether the following situations occur: 1. The direction of the punching needle is inconsistent with the direction indicated by the arrow on the strap 2. The pin hole of the strap is not aligned The gap at the front end of the metal strap remover.
- please adjust the strap, otherwise it is easy to cause the punching needle to bend and damage your watch..
- 【Easy to use】 — Turdy and durable, easy to carry, practical, easy to operate, you can solve the problem of the watch at home, save the expensive expenses, suitable for beginner familie....
Check StockReal Avid unisex adult & Standard Accu Punch Hammer Punches Red Accu-Punch Hammer Punches US
- GUNSMITHING TOOL KIT: gunsmith hammer and punch set, essential armorers tool kit for firearms disassembly, gun repair and for custom builds..
- PUNCH SET: array of standard, flat tip metal punch selection to remove and install solid pins.
- features 1/16″, 5/56″, 3/32″, 1/8″, 9/64″,....
- ADJUSTABLE GUNSMITH HAMMER: small hammer with 4 interchangeable head tips.
- that's like having a metal hammer, brass hammer, nylon hammer and soft....
- RELIABLE GUN REPAIR TOOL KIT: the gunsmithing hammer is well balanced for precision taps.
- the tools are rubberized to help you grip and hold the tools....
- PIN STARTER: pin alignment tool makes it easy to start a small pin and prevents damaging pins..
Check Stock