Reviews Pin Lock Keg

LUCKEG Homebrew Pin Lock Disconnect Pin Lock MFL Quick Disconnect with Swivel Nut and Free Hose Clamp for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect MFL type with 5/16" swivel nuts (3 pcs), Pin Lock Liquid Disconnect MFL type with 3/16" swivel nuts (3 pcs), Worm....
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Nuts and Worm Clamps.
  • 3.Easy Connect: The Gray Base Pin Lock Keg Disconnect connect 5/16" Gas Line, and the Black Base Pin Lock Keg Disconnect connect 3/16" Beer Line.
  • 4.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement Free..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

PERA 3/16 pin lock beer line assembly picnic tap with 3ft beer line for home brewing

  • Include: Pin Lock Liquid Disconnect MFL, Swivel Nuts, Beer Hose ID 1/4” OD 5/16” Length 3ft, 2 PCS Free Beer Hose Clamp, Picnic Tap, Already....
  • Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Adapters and Hose Clamp, Plastic Material for Beer Line and Picnic....
  • The 3/16" beer line and picnic faucet assembly comes fully assembled and allows you to dispense directly from your pin lock keg by simply sliding on....
  • Use: The Assembled Pin Lock Beer Line used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock

PERA 3/16 pin lock MFL beer line assembly & 5/16 pin lock gas line assembly for home brewing

  • Liquid Line Include: Pin Lock Liquid Disconnect MFL, Swivel Nuts, Beer Hose ID 1/4” OD 5/16” Length 3ft, 2 PCS Free Beer Hose Clamp, Picnic Tap,....
  • Gas Line Include: Pin Lock Gas Disconnect MFL, Swivel Nuts, Gas Hose ID 5/16” OD 9/16” Length 5ft, 2 PCS Free Beer Hose Clamp, Already Assembly.
  • Use: The Assembled Pin Lock Beer Line used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • Multi-Usage, carbonated seltzer water, home brew, different beverage, outdoor picnics, keg cleaning.
  • Guarantee: Quality Guarantee, any problem for Pin Lock Line, Money Back or Replacement free..
Check Stock

MRbrew Picnic Faucet 2 Pieces Plastic Draft Beer Dispensing Spigot Keg Tap for Home Brewing Kegging Cornelius Corny Hose Tubing Line

  • PACKGE: 2* plastic beer faucet, 2* beer hose clamp..
  • KEGGING NECESSARIES: necessary for home kegging systems..
  • NO LEAKS: comes with hose clamps to prevents leakage excellently..
  • MATERIAL: these picnic keg taps are made of healthy plastic, will not affect the beverage taste, durable, can be used for long time..
  • COMMONLY USED GADGET: these brewing beer taps can be used for dispensing beer, kombucha from cornelius keg, corny keg, ball lock keg, pin lock keg..
Check Stock

PERA 2 Pair Pin Lock coupler MFL 2 Gas & 2 Liquid Quick Disconnects Set

  • Packing: Pin Lock Gas Disconnect MFL 1/4”(2PCS) , Pin Lock Liquid Disconnect MFL 1/4” (2PCS).
  • Material: PBT Material for Pin Lock Quick Disconnect Body and Stainless Steel for Threaded End.
  • Use: The Pin Lock MFL Disconnects used for Cornelius style Pin Lock keg (Coke), Works for Beer or Soda.
  • A Perfect Gift for Home Brewing and Wine Making Lovers.
  • Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock

Kegco Keg Dispenser, Two Faucet, Black

  • ...atures that you've come to appreciate in other Kegco models, like an easy-to-clean removable built-in drip tray, a chrome guardrail that helps prevent glasses from sliding off of the countertop, and easy rolling casters that allow you to easily move the unit from room to room in your home or business! These casters lock to keep the unit from moving again once it's in position..
  • LARGE INTERIOR: The generously sized 5.8 cu.ft. interior can hold one full size keg (including Miller kegs, Coors kegs, and rubber kegs), one pony keg, one quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. When you're not using it to store and dispense kegs, you can use the three wire storage shelves to convert the keg refrigerator into a regular all-refrigerator. The unit measures 35.875" H x 24.375" W x 24" D..
Check Stock

Kegco MDK-309SS-01 Keg Dispenser, Stainless Steel

  • Features a reversible door | removable guardrail | Includes Keg dispenser / Gas and Beer lines / Co2 tank (ships empty) / & regulator.
  • Product dimensions – 25” D x 24” W x 33.25” H | Electrical – 115V / 60 Hz / 1.7 running amps | Fits barrels – One full size (1/2) / One Pony size (1/4) / One slim (1/4) / Two 1/6 or Three 5 gallon ball / pin lock Keg.
  • Recommended clearance around the unit – 3” on all sides | Do not expose outdoor | Temperature range – 32ᵒ to 75ᵒ.
  • Store up to three Cornelius ball lock kegs in the MDK-309SS-01 's spacious interior, or use it to hold a 6 gallon bucket or carboy of fermenting homebrew. This keg refrigerator can even be used to store food and other beverages!.
  • With a digital LED display and intuitive controls, it is easy to set and verify the internal temperature of this home brew keg refrigerator | Simply press the up or down button, and the temperature is adjusted by one degree in Fahrenheit or Celsius.
Check Stock

Kegco Keg Dispenser, Two Faucet, Stainless Steel

  • ...atures that you've come to appreciate in other Kegco models, like an easy-to-clean removable built-in drip tray, a chrome guardrail that helps prevent glasses from sliding off of the countertop, and easy rolling casters that allow you to easily move the unit from room to room in your home or business! These casters lock to keep the unit from moving again once it's in position..
  • LARGE INTERIOR: The generously sized 5.8 cu.ft. interior can hold one full size keg (including Miller kegs, Coors kegs, and rubber kegs), one pony keg, one quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. When you're not using it to store and dispense kegs, you can use the three wire storage shelves to convert the keg refrigerator into a regular all-refrigerator. The unit measures 35.875" H x 24.375" W x 24" D..
Check Stock

Pin-Lock MFL Dis-connect Set with Swivel Nuts 2 5/16 Gas 1/4 Liquid Barbed by PERA

  • 1.Include: Pin Lock Gas Disconnect MFL, Pin Lock Liquid Disconnect MFL, Swivel Nuts 1/4 for Liquid, 5/16 for Gas.
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Adapters.
  • 3.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 4.Connect: The 1/4 Swivel Nut Barb is on the Liquid Side and connect to the Common 1/4" Liquid Hose, The 5/16 Swivel Nut Barb is on the Gas Side and....
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Protecting Vidalia

  • Allows you to hook up your Tapcooler counter pressure bottle filler to your keg, vs the faucet..
  • Includes close to 78 in. of tubing so you'll have plenty of clearance from your Keg to your bottling area..
  • Included valve hooks right up to the Tapcooler and is to open and close as you fill your bottles..
  • Setup is a snap. Simply remove the faucet fitting on the Tapcooler filler, attach the valve end, attach a ball (or pin) lock connector into the included swivel nut set on the tubing, and hook to your keg, and get to bottling!.
Check Stock

Homebrew Pin Lock Disconnect Set - LUCKEG Brand Pin Lock Connectors MFL with Swivel Nuts for Draft Beer Keg System

  • 1.Include: Pin Lock Gas Disconnect MFL with 5/16 Swivel Nut, Pin Lock Liquid Disconnect MFL with 1/4 Swivel Nut (4 PCS).
  • 2.Material: PBT Material for Pin Lock Quick Disconnect and Stainless Steel for Swivel Nuts.
  • 3.Use: The Pin Lock MFL Disconnects used for Cornelius Style Pin Lock Keg, Works for Beer or Soda.
  • 4.Connect: The 1/4 Swivel Nut Barb is on the Liquid Side and connect to the Common 1/4" Liquid Hose, The 5/16 Swivel Nut Barb is on the Gas Side and....
  • 5.Guarantee: Quality Guarantee, any problem for Pin Lock Disconnect, Money Back or Replacement free..
Check Stock