Reviews Pin Headers

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

Dupont Connector Kit - 1004pcs Crimp Connector Kit with 2.54 mm Crimp Pin Connector Housings, Single Row Male Headers, Male/Female Crimp Pins and Ribbon Cable from Plusivo

  • Complete Dupont Connector Kit: This kit includes different types of connectors such as single row pin headers, bent pin headers, colored pin headers, crimp pin connector housings, and male & female crimp pins for wires..
  • Premium Quality Dupont Connectors: High-quality crimp pin connector housings made of durable plastic and metal tin plated pins with internal pure copper for increased conductivity..
  • More than 1000 Dupont Connectors and Crimp Pins: Create custom breadboard jumper wires and circuit board wire connections using the wide selection of parts included in this kit..
  • Durable Plastic Storage Box: All the items are packed inside a durable plastic box with adjustable compartments to organize all the components as desired, either by type or by size. Bring your kit anywhere and keep the dupont connectors free from damaging and breaking..
  • Satisfaction Guarantee: Our connector assortment box is backed by our manufacturer 30-day money back guarantee.
Check Stock

SparkFun Compatible with Arduino Pro Mini Starter Kit - 5V/16MHz - Comes to get a Project Started

  • The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
  • Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
  • Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
  • Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
  • Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).
Check Stock

MakerHawk 6pcs USB to DIP Adapter Converter, Mini USB Female, Micro USB Female, 2.54mm 4p USB Male, USB 2.0 USB 3.0 Female, USB Type B Square Interface Female to DIP PCB Power Breakout Board Module

  • Model number: Mini 5p USB Female Connector, 2.54mm 4p USB Male Connector, USB 2.0 4p Female Connector, USB 3.0 Flat Female Connector, Micro USB Type B Female Connector, USB Type B Square Interface Female Connector.
  • Mini USB to DIP, USB female connector mini 5p patch to DIP, welded adapter board. USB male to Dip, 2.54mm USB 4p to Dip, adapter board has been soldered mobile phone power data cable.USB 2.0 4p female connector to DIP, adapter board has been soldered mobile phone power cable..
  • USB 3.0 flat female connector to DIP module.Micro USB type B female connector to DIP, Mike 5p patch to dip, welding female power adapter. 6. USB type B square interface female connector to DIP adapter board.
  • Type of Pin Headers: three 4-pin Pin Headers, two 5-pin Pin Headers and a 9-pin Pin Header.
  • After-sales Service: We have a strong after-sales service team, as long as you have any questions about the product, we will solve your problem immediately after receiving your email, please click "MakerHawk-US" and click on how to send us an email "Ask a question" email us, looking forward to your inquiry, we will reply you within 24 hours.
Check Stock

Antrader Breadboard Jumper Wires 40 Pin 10CM Female to Female for Raspberry Pi

  • Package: 1 piece of the 10cm 40pin female to female multicolored jumper wires cables..
  • Jumper wire length: 10cm/3.94 inch(F/ F).
  • Connectors: 40pin female to female header.
  • Compatible with 2.54mm spacing pin headers..
  • Made of high-grade copper wire material, safe and durable to use..
  • The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers..
  • Can be used for electronic project, genuine breadboard kit project, PCB project, PC motherboard, etc..
Check Stock

Noctua NF-A4x20 PWM, Premium Quiet Fan, 4-Pin (40x20mm, Brown)

  • Premium quiet fan, 40x40x20 mm, 12V, 4-pin PWM, max. 5000 RPM, max. 14.9 dB(A), >150,000 h MTTF.
  • Award-winning A-series design with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 5000rpm maximum speed (4400rpm with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, extension cable, y-cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers.
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • ...8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub buil....
Check Stock

Glarks 635Pcs Connector Housing Male/Female Pin Connector 40 Pin 2.54mm Pitch Pin Headers and 10 Wire Rainbow Color Flat Ribbon IDC Wire Cable Compatible with Dupont Connector Assortment Kit

  • 100% Brand new high quality connector, pin headers and IDC cable compatible with dupont connector kit..
  • Package Includes: Female / Male Housing Connector, 2.54mm pin connector, 40 Pin 2.54mm Pitch Single / Right Angle Row Pin Headers, Rainbow Color Flat....
  • Material: Crimp pin connector is made of durable plastic and metal, tin plating, internal pure copper to increase the conductivity, the surface....
  • Feature: This set of connector is easy to install, you can just put the crimps in the tool and press them, make the crimp the insulation are all the....
  • Widely Application: Compatible with Arduino and breadboard style pin connectors and sockets, like 3d printer boards..
Check Stock

Noctua NF-A4x10 PWM, Premium Quiet Fan, 4-Pin (40x10mm, Brown)

  • Premium quiet fan, 40x40x10 mm, 12V, 4-pin PWM, max. 5000 RPM, max. 19.6 dB(A), >150,000 h MTTF.
  • Award-winning A-series design with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance.
  • 40x10mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 1000-5000rpm speed range (3700rpm max. with supplied Low-Noise Adaptor).
  • Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and OmniJoin adaptor set for connecting the fan to proprietary fan headers.
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • ...8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub buil....
Check Stock

Glarks 112Pcs 2.54mm Male and Female Pin Header Connector Assortment Kit 100pcs Stackable Shield Header and 12pcs Breakaway PCB Board Pin Header for Arduino Prototype Shield

  • 1. What you get: This kit includes all types of pin headers you need, including 50pcs long needle female pin headers, 40pcs short needle female pin....
  • 2. Material: Insulated plastic, hard metal pin.
  • 3. All Products Spacing: 2.54mm/0.1 inches.
  • 4. Feature: They are the perfect height for clearing the USB-B connector and great for stacking multiple shields.
  • 5. Application: Perfect used for wire connecting in the field of Automotive,electrical appliances and Internet, especially for the computer and....
Check Stock

Exhaust Header Shorty Engine Conversion Swap Truck Stainless Steel Header Compatible with Chevy GMC Trucks LS1 LS2 LS3 C-10 LS Pickups

  • Come with 15pcs male headers and 15pcs female headers.
  • Type of row: single row, type of pin: straight.
  • Great tools for arduino prototype shield.
Check Stock

CRJ 5-Pin Female PC Fan Adapter Cable for Dell Motherboards

  • Adapter Cable For Connecting Standard 3-Pin And 4-Pin PC Fans To A Proprietary 5-Pin Fan Header.
  • Designed For Compatibility With 5-Pin Fan Headers Found On Dell PC Motherboards.
  • Fully Functional 4-Pin PWM Fan Speed Control Support (3-Pin Analog Fan Speed Control Is Limited To Support By The Motherboard).
  • All Black Appearance And High Quality Construction Featuring High Density Black Sleeving And 22AWG Wiring.
  • Cable Length (Excluding Connectors): 6″/15cm.
Check Stock