Reviews Pin Drive Anchor

Nylon Mushroom Head Drive Pin Nail-in Anchor 3/16 x 1-1/2 200 Pieces

  • Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
  • Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
  • Nail Material: Steel. Anchor Body Material: Nylon..
  • Please see all available products by PHAT SATELLITE INTL.
Check Stock

Lisle 29450 Short Anchor Pin Bushing Driver

  • Includes a 7" Driver for Applications withLimited Access..
  • Pneumatic bushing driver set removes and installs truck andtrailer 1-3/8" anchor pin bushings and stuck anchor pins..
  • Double sided cone snaps onto driver to drive out and installbushings.
  • Use flanged end to install and tapered end toremove.
  • Also removes truck leaf spring bushings..
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Hilitchi 24-Pcs [3-Sizes] 35mm 46mm 59mm Long Hollow Wall Drive Anchors Assortment Kit Zinc Plated Steel Heavy Duty Philips Round Headed Molly Bolt Drive for Drywall

  • Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
  • Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
  • Nail Material: Steel. Anchor Body Material: Nylon..
  • Please see all available products by PHAT SATELLITE INTL.
Check Stock

OCPTY Trim Clip Pliers Applicable for Most Cars Repair Kit

  • Professional Tools: Designed for removing pushpins using the center locking pin. Quickly and easily remove the plastic anchor with the center pin without damaging the pin or anchor. The conical end and spring-loaded design make it easier to use..
  • Double Buffer Handle: These car clips are made of high-quality steel, which is rust-proof and scratch-resistant. The long handle of the drawing pin pliers has double buffer handles, which can reduce hand fatigue and improve productivity. It is economical and practical, with fine workmanship and bright surface..
  • Special Design: The pliers are specially designed to allow access around the wheel well at a 30-degree angle. The pushpin can be removed by the center locking pin, allowing you to quickly and easily remove the plastic anchor from the center pin without damaging the pin or anchor..
  • Universal Disassembly Tool: Small and light, easy to use and transport, can be placed in a suitcase or other storage space, suitable for vehicle maintenance and maintenance, is a high-quality maintenance and repair tool for all types of vehicles..
  • Attention: As a professional car removal pliers repair tool, it is recommended to be operated by a professional car mechanic to avoid irreversible damage to the parts/car due to misope....
Check Stock

DASBET 17PCS Auto Bearing Race Seal Driver Disc Tool Master Set Wheel Axle Bushing

  • 【Direct use of】：Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins. Includes an 11-1/2" long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings..
  • 【High quality】 : The use of high quality reinforced materials, wear and corrosion resistance, long service life, so that it has a longer peak work rate, I believe it can make your work more relaxed.
  • [Scope of application] : Truck bushing removal, which also includes removing pins and inserting bushings.
  • 【Buy With Confidence】: Lifetime warranty service, once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems.
Check Stock

Sierra 18-2345-9 Trim Cylinder Anchor Pin E-Rings for Mercruiser Alpha I & Gen II - 2 Pack

  • Designed for use in Mercruiser Alpha I and Gen II stern drives.
  • Includes two trim cylinder anchor pin e-rings.
  • Interchangeable with Mercruiser Stern Drive 53-815949.
  • Check manufacturer recommendations to ensure a proper fit before purchasing.
  • Each Sierra product meets or exceeds the original equipment part it replaces.
Check Stock

6 Pack Ground Earth Anchors - Easy Hook Anchor with 30' Long x 1/8' Cable, Ideal for Securing Shed, Fence, Green House, Swing Set and More.

  • 【Save Time and Energy】Package include 6 pcs ground anchors. Compare to twist type anchors needs using the strength of your arm to slowly pierce the ground nail down, Our ground anchor heads are designed to cut through grass, dirt, loose gravel, sand. could easy to drill into the ground with drill steel tool. How convenient for your life, save your more time and energy..
  • 【1000 Lbs Hold Strength】This 6 piece anchoring system has superior hold strength and will not come out of the ground when installed at full depth (30"), Holding power for each anchor will be up to 1000 lbs when installed at full depth.
  • 【Easy to Use】You will need a hammer and a 0.5inch diameter drive steel tool to drive the anchor into the ground with no holes, no concrete, and no digging required. Remove the drive tool and pull up on the cable to set the toggle. The upward pull rotates the earth anchor into a perpendicular lock position allowing it to firmly secure your item to the ground. Note: drive steel tool is not included..
  • 【Widely Application】This easy hook anchor staking system is a convenient and strong method for secure and prevent the theft or unwanted movement of outdoor items, such as greenhouses, shelters, gazebos, picnic tables, benches, BBQ grills, garbag....
Check Stock

Wej-It Nail-It DN1412 Drive Anchor Zamac Alloy Zinc Plated Finish Meets GSA FFS-325 Group V Type 2 Class 2 Specifications 1/4 Diameter 1-1/2 Length Pack Of 100

  • Drive anchor provides a secure hold in concrete, block, brick, and stone.
  • Anchor consists of a zamac alloy body and a cold rolled steel pin, which drives in with a hammer (sold separately) to expand and grip the mounting material.
  • Meets Fed. Spec. GSA FFS-325 Group V, Type 2, Class 2 specifications.
  • Ultimate tensile strength for a static load is 800 lb. in 3,000-psi unreinforced stone aggregate concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

2 Pcs 10mm Screw Pin Anchor Shackle 3/8 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 2 Pcs 3/8"(10mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 22mm, Working Load Limit: 2000lbs, Breaking Load: 8000lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

1 Pcs 12mm Screw Pin Anchor Shackle 1/2 Inch 304 Stainless Steel Shackle for Rigging, Chains Wirerope Lifting.

  • 1/2 Inch Anchor Shackle: Made of 304 stainless steel, one-way screw, bolt design, higher hardness, moisture-resistant, acid and alkali resistant, anti-rust, Connect loose ends of cables, chains, tow straps and snatch blocks..
  • Anchor Shackle Size: 1 Pcs 1/2"(12mm) Bow Shape Screw Pin Anchor Shackle, one-way screw, bolt design, Max Open Width: 1" (25mm), Working Load Limit: 1400kg / 3086lbs, Breaking Load: 5500kg / 12125lbs..
  • Easy to Use: Make sure that the pin is properly screwed into the bow shackle hole, tighten it by hand, it with a wrench or other suitable tool, The best use of connection accessories, is perfect for use with ropes..
  • Wide Application: Screw pin anchor shackles, used for sailing hardware, towing, hiking and other outdoor sports, Great for boats, jeeps and other applications for tie downs, towing, could be also used in loading and unloading of goods..
  • Hardware Parts: These shackles hooks for anchoring, binding, rigging all types of hardware, always used together with a expansion hook and stainless steel chain, apply to a variety of boat or household applications..
Check Stock

uxcell® M6x45mm Zinc Plated Hammer Drive Anchor Expansion Bolt Fastener 8pcs

  • Total Length(Not Included Nail): 45mm/1.8".
Check Stock