Reviews Picatinny Scope Mount

FENTUK 1

  • 2 Pack FENTUK Scope Ring Adaptors With Picatinny Rail- 1 Inch & 30mm ring with picatinny top rail provides a solid mounting platform for adding an additional backup sighting tactical accessories to your rifle scope. Four screws on this ring ensure that the back-up sight will hold zero shot after shot, provide dependable long-lasting durability..
  • Fit for 30mm & 25.4mm Scope Tube- Our rifle scope ring adapter with picatinny style, each ring with circular hard gasket design, the diameter of the ring from 30mm/1.18 inch to 25.4mm/I inch, effectively switch between two sizes, perfectly meeting your different needs!.
  • 4 Slots Picatinny/Weaver Top Rails- Top 4 Slots 1.77" picatinny rail design, allowing you add on standard 21mm Picatinny or Weaver accessories, such as tactical flashlight, laser scope sight, red dot sights, micro red dot, backup/second laser sights, optics and other accessories..
  • High Quality Aluminum, Solid & Durable- Precision machining of aircraft grade aluminum alloy in black matte anodizing finish. Sturdy & durable, lightweight & compact construction, offer stable safe performance in the field. Item size: 1.77"L x 1.72''W x 1.70''H, item weight:1.38Oz/1 pcs..
  • Easy To Install & Remove- Our Scope Ring Barrel Mount is easy to install or remove ....
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

MIZUGIWA 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Rifle Scope Mount

  • Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings.
  • Heavy duty - Scope Mount Weight about 8.38oz.
  • Mount provides 2" of forward scope positioning on the .223 flat top platform.
  • Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for....
Check Stock

Monstrum Lockdown V3 Picatinny Riser Mount with Recoil Stop Base | 5.5 inch Length | Low Profile | 20 MOA

  • Next generation Picatinny riser mount for optimal positioning of picatinny or weaver base scopes, red dots, or optics.
  • 5.5 inches in length with 13 Picatinny rail slots.
  • Picatinny base is equipped with custom recoil stop bolts that slot seamlessly into your Picatinny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • 20 MOA mount is angled downward at 20 MOA providing a higher range of elevation adjustment when zeroing your scope. It is suitable for zeroing your scope at long distances..
  • All Monstrum mount and accessory products come with a lifetime warranty.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Scalarworks Lightweight Ultra High-Performance QD LEAP/Scope Mount, 30mm, 1.57' Height

  • COMPATIBILITY: Rifles with MIL-STD-1913 Picatinny Rail.
  • ULTRA HIGH-PERFORMANCE SCOPE MOUNT: Designed for shooters who want the lightest, most rigid, easiest to use, and least obtrusive quick-detach scope mount possible.
  • LEVEL HEADED: the Leap includes our proprietary leveling screw to help you conveniently square your scope with your mount.
  • LIGHT MADE RIGHT: engineered to be the lightest QD scope mount, without compromising an ounce of strength.
  • QUANTUM QUICK-DETACH MECHANISM: Quantum Quick-Detach mechanism is completely recoil proof, while requiring only enough torque to firmly clamp onto a Picatinny rail.
Check Stock

Rear Sight Rail Mount for installing Low Profile Red Dot Optics Scopes

  • Converts your rear sight into a 1913 Picatinny rail allowing for mounting low profile optics For Hunting Red Dot Optics.
  • Feature: -Fast and easy installation. -Mount on standard 20mm weaver base -Constructed of Aluminum.
  • Quick 1 step installation. Ultra light weight and low profile red dot scope mount for rifles Reference aiming dots on rear to use scope mount rail as....
  • Accessories Rear Sight Scope Mount Rail Picatinny Weaver For Optics.
  • Specification： 1.Customizable level adjustment (up/down, left/right) . 2.Hardcoat anodized 6061 aircraft aluminum. 3.Recommended for use with low....
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Thorn 30mm / 1 inch Quick Release Cantilever Picatinny Scope Mount QD Lock

  • Quick release scope mount ,allow up to 2 inches of forward scope positioning.
  • QD scope mount,quick release design allow for fast mounting.
  • Quick replease scope mount ,Lightweight 6061 grade aluminum construction.
  • QD scope mount ,mounts to any flat top Picatinny rail equipped rifle.
  • Thorn cantilever scope mount ,package include 1 pair adapter.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock