Reviews Pi Camera

Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Raspberry Pi Camera, Compatible with Nvidia Jetson Nano/Xavier NX

  • Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 16MP IMX519 raspberry pi cameras to a single standard pi board and capture images or video at the same time..
  • Four in One: Combine four cameras into one frame, each with a resolution of 1/4.
  • the maximum output you can get: 4656 x 3496 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera..
  • Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX and many more. And this Camarray HAT is also compatible with Raspberry Pi 3 and Raspberry Pi (V1/V2/HQ) cameras..
  • Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware..
  • Please note: The cameras in the set are specifi....
Check Stock

Aokin for Raspberry Pi Camera Module 5MP 1080p with OV5647 Sensor Video Camera Module for Raspberry Pi Model A/B/B+ Pi 2 Raspberry Pi 3 3B+ Pi 4 and Pi Zero/Zero W with Flex Cable

  • Compatible: camera module fit for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B 3B+, Pi 4B, Pi Zero, Pi Zero W..
  • Ribbon flex cable: 11.81in/30cm golden camera cable specially designed for Raspberry Pi zero/zero w.
  • 5.90in/15cm and 19.68in/50cm white camera cable....
  • Specification: 5 Megapixels sensor with OV5647 webcam sensor in a fixed-focus lens.
  • the high-definition video camera is capable of 2592 x 1944 pixel....
  • Endless creativity: 15-pin MIPI camera serial interface - plugs directly into for the Raspberry Pi board.
  • The camera module size: 25mm×24mm×9mm and....
  • If you have any issues for raspberry pi version 1.3 camera module, please contact us by Amazon message, we will do our best for you..
Check Stock

Raspberry Pi HQ Camera Module with Case for Raspberry Pi 4B/3B+/3B/2B/A+/Zero/W/Zero WH,12.3MP IMX477 Sensor Support C- and CS-Mount Lenses, Alternative for Raspberry Pi Camera Module V2 (8 Items)

  • This Raspberry Pi High Quality Camera is the latest camera board from Raspberry Pi Foundation.It is compatible with All Raspberry Pi series boards (Raspberry Pi 4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH,etc.).
  • Higher Resolution & Sensitivity Camera Module---Compared To 8MP Of Normal Raspberry Camera, The High Quality Camera Offers Up To 12.3MP, Along With Nearly 50% Greater Area Per Pixel, Delivering Better Imaging Effect..
  • It adopts the IMX477R sensor, and requires a C- or CS-mount lens to work..
  • It could be an ideal alternative for the Raspberry Pi Camera Module V2. It suits industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity..
  • Package Content: 1.Raspberry Pi High Quality Camera main unit. 2.C-CS adapter. 3.Dust cap. 4.FPC ribbon. 5.Screwdriver. 6.Packing box. 7.Raspberry Pi Zero V1.3 Camera Cable 15cm. 8.Raspberry Pi Camera Matching Case..
Check Stock

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 3B+, 3B, 2B, Pi Zero & W

  • Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
  • Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
  • Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
  • Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • High Quality Camera: Compared with Raspberry Pi Camera Module V2, this camera module offers higher resolution, up to 12.3MP. Also adopting 12.3MP IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vis....
Check Stock

Aokin for Raspberry Pi Camera Cable, FFC Cable Ribbon Flex Extension Cable 15 Pin 1.0mm Pitch for Raspberry Pi, Octoprint Octopi Webcam, Monitor 3D Printer, etc, 50cm/19.68in

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be flexible with camera placement..
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to Raspberry Pi camera and another end with 15 Pin 1.0mm Pitch interface to Raspberry Pi board..
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • also use for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc. Model: FFC.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

8 Pieces Camera Compatible with Raspberry Pi Module with 15 Pin Ribbon Cable and Flex Extension Cable Set Compatible with Raspberry Pi Model A B B+, Pi 2 and Raspberry Pi 3, 3 B+, Pi 4

  • Focus lens: OV5647 Pi camera sensor has a fixed-focus lens, which can capture clear and beautiful images quickly and easily, helping you keep happy moments and save unforgettable memories.
  • CSI interface: 5-megapixel camera module uses a dedicated CSI interface, so the higher bandwidth ink that carries pixel data from the camera back to the processor via the CSI bus, interface carries pixel data from the camera back to the processor, BY THE WAY with pi zero ribbon cable can be applied on zero board perfect.
  • Resolution parameter: 2592 x 1944 Pixel Static Images, 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording,5 megapixel sensor OV5647, and its video resolution is 1080p, which is clear enough for you to use.
  • This is a practical design for you to take some beautiful photos of your family.
  • Flex extension cable set: whatever for 3D printer, home security, or other for raspberry pi camera project, this camera cable set can totally meet your requirement.
  • Compatible with all Raspberry Pi board, camera module and display, suitable for octoprint 3D printing monitoring.
  • Wide compatibility: this 5 megapixels camera module is compatible with raspberry pi model A or B, B+, model 2, raspberry pi 3, 3 B+, pi 4, works well with your equipment, bring y....
Check Stock

Arducam Pi Camera Cable, Octoprint Octopi Webcam, Monitor 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

  • 100cm/3.28ft length, 15 Pin 1.0mm Pitch interfaces, longer than the standard Raspberry Pi camera cable..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Natively compatible with all Raspberry Pi A&B series board, camera module and display..
  • Long enough for mounting the camera, especially useful when you don't want to place the camera near the Raspberry Pi..
  • Arducam is a company dedicated to open source hardware and software, specifically for Arduino and Raspberry Pi camera solutions. We also offer customized turnkey design and manufacturing solution services for customers who want their products to be unique..
Check Stock

MELIFE Octoprint Octopi Webcam Mini Camera Video Module 5 Megapixels Monitor 3D Printer with 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi A/B/A+/B+, 2, 3, 3B+

  • 5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards..
  • Come with extra 100cm/3.28ft extension cable, long enough for mounting the camera, especially useful when you don¡¯t want to place the camera near the Raspberry Pi..
  • Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement..
  • Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects..
  • Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series and 1 5MP camera module. Cable for Pi zero is not included..
Check Stock

Arducam Raspberry Pi HQ Camera, 12.3MP IMX477 Camera Module with CS-Mount Lens, Automatic IR-Cut Switching All-Day Image, Compatible with Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • Raspberry Pi HQ Camera: This camera module offers higher resolution, up to 12MP, which can deliver better image quality than 8MP. Also adopting IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • IR-Cut：The camera can switch IR-CUT filter in and out automatically, supports both day and night vision. which can keep you all-day image..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration..
  • Package included: Come with a CS-Mount lens and two cables, 300mm 15-22 pin cable for Pi 1-4 connection and 300mm 22-22 pin cable for Pi 0 and Compute Module connection. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vision applications demand IMX477 camera. It can also serve for Artificial Intelligence, like facial recognition, high-speed capturing and so on..
Check Stock

LoveRPi Noir Camera for Raspberry Pi 4/3/2/Zero W 5MP No IR Filter

  • NOIR CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi....
  • NO IR FILTER: Designed for low light and infrared applications, this camera module captures infrared light for higher contrast in dark environments.....
  • AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality.....
  • SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for....
  • USER UTILITIES: There are two command-line utility "raspistill" and "raspivid" for capture images and videos respectively. There are user-developed....
Check Stock

BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller 7in Capacitive Touch Screen 165X100mm

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit for Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be....
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to for Raspberry Pi camera and another end with 15 Pin 1.0mm....
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

LoveRPi Ultra Wide Angle Camera for Raspberry Pi 4/3/2/Zero W (5MP, 220 FOV)

  • ULTRA WIDE ANGLE 220* CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for ultra wide angle, low latency, and high quality imaging required for computer vision, streaming media, and remote data acquisition..
  • INTEGRATED IR FILTER: Infrared light is invisible to the naked eye but will cause hue changes to CMOS camera sensors. The integrated filter prevents infrared light from distorting the image hue resulting in color accurate imagery for daytime outdoor applications..
  • AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality. Additionally, it has built-in 50Hz/60Hz anti-flickering, lens correction, and defective pixel cancelling functions..
  • SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for Raspberry Pi Zero, Pi Zero W, and Pi 0WH are also included. Open a terminal, type in "sudo raspi-config.
Check Stock